Originally Posted By: Noel96
Trev,

Have you had a look at the midi events for the melody track? Each note on a Supertrack (if that's what you're using) has its own individual velocity setting. I wonder if this is what's overriding the overall volume.

Regards,
Noel

Hi Noel, thanks for jumping in.

Well, yes I did check that there is velocity information with the MIDI events, but I believe that this is a normal part of a MIDI note-on event.
The three bytes for a Note-On event should consist of
Status Byte
- Upper nibble = 1001 for a Note-On event
- Channel in the lower nibble - in this case 8

1st data Byte:
Note number in the lower 7 bits

2nd Data Byte:
Velocity in the lower 7 bits

It's not using MIDI Super Track data, just a standard MIDI file for that track. Although there is velocity data, I would have expected that the volume control on that track would have affected the relative volume.

Rather confusing, actually.

Thanks
Trev

Attached Files (Click to download or enlarge) (Only available when you are logged in)
2017-01-19_20-28-57.jpg (131.79 KB, 175 downloads)
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones