I use normalisation totally differently. When I pull the tracks into my daw (usually Reaper) I normalise all the tracks to -10db to -15db depending largely on the number of tracks. With all tracks playing I then like to be about -6db or less. I have a quick listen . I might renormalise (usually drums and bass) to put them up a couple of dB to have them better in the mix. I then do the mixing. At the end of the mixing process I like to have about -4db to -6db or less for headroom for the “mastering”. The final stage in the mastering chain has a limiter which I use to lift the track to -14 LUFS with a true peak of -1db. This way the songs all come out about the same level, reasonable balanced and ready for use.

In nearly all cases if I pull them into Audacity the songs are at -1db a different way to arrive at the same result.

I often use MP3 files to use when performing I put these through MP3Gain which in a sense renormalises again.

All seems like extra work but IMHO it in fact saves time.

Tony



Last edited by Teunis; 12/30/18 12:18 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1