So, what driver is being used by the interface?

In most cases, the ASIO driver is the preferred driver. It will, however, grab the MME or other driver unless you specify ASIO as it's default.

Steinburg says this: Our UR-Cs are compatible with all major audio software supporting the ASIO, Core Audio or WDM standard, providing a fully integrated, DSP-based monitoring setup wherever you are and with whichever DAW you use. Integrating seamlessly with Cubase and almost any other DAW, UR-Cs deliver latency-free monitoring with DSP-powered FX, via the onboard SSP3 DSP chip and latest dspMixFx technology.

Be sure you download the latest ASIO driver ( not wrappers and other codec based things) and use it and see if it makes a difference.



What you are describing is often caused my using a less optimal driver in windows. It can also be sampling rate... be sure everything is set to 44.1khz and adjust the latency and buffers if you need too. Often, with sampling and drivers being set properly, everything else works well at default values.


Edit: If you open a DAW for example... it will grab the ASIO driver and when you open BB, it will have to use MME or whatever else is available. This happens to me when I'm working and not thinking about what was already open. MME will give you that kind of crappy performance every time on a good machine.

Last edited by Guitarhacker; 02/03/21 10:20 AM.
You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.