Here's the latest in rackland for me. Now in search of a Kurzweil module that will complete the rack on the right. That will be an adventure because people tend to keep those or ask for a kidney when they sell them. I managed to swap an old M-Audio interface for 3 shallow rack shelves just big enough for their intended purpose.

The one on the left will get the boutique synths and drum machines and such that don't have rack ears and in fact can't be racked because of the form factor. The plugs are all on the back so if they were 19" rack mounted the wires would all be coming out of the top.

Today's addition was a 12 channel Alesis mixer, which allowed me to not use my live rig mixer that took up too much rack space anyway.



I have the stuff in the right rack to where the sound sources are above and below but adjacent to the mixer, and the MIDI router and compressor are at the bottom. I don't know why I did it that way other than it seemed logical. The Kurzweil will go on top and finish off the right rack. I am still working on how to affix the small boutique synths on those slanted shelves in the left rack. I have to engineer some kind of slanted bases so I can see them. Ah, geometry. You and your angles are such a fickle beast! Any suggestions? Wood wedges seem to be the most logical.

Last edited by eddie1261; 09/30/21 03:42 PM.