Well I finally got rid of that crappy laptop I had for many years and upgraded to a Ryzen 9 3950x and a Asus ROG B550 mother board with 32gig of DD400 memory, all donated to me by my son as he upgraded to who knows what.
Sweet system for sure.
It got me thinking about BIAB 2025. I understand that it will utilize multiple cores now for doing all the work behind the scenes. If my CPU has 16 cores, will BIAB 2025 utilize all of them if necessary or is it limited to a certain number by software design. More of a curiosity question then anything else. I already know that programs I currently use do utilize all if them if necessary.
BIAB2025 Windows 10 Pro WA6NCB No Longer on a Crappy Laptop!
see my tips in pg tips forum re useing a new pc for music production as well as performance tests you can run on your new pc. though your cpu is a tad older it was often called a 'beast'. properly set up and optimised for music production it should eat up win boots and bb and rb. my lesser ry cpu boots into win from cold and bb and rb in a few secs. and here bb track gens are nearly 'blink of an eye'. i note your ry has a good single thread score from stats ive seen... not the best but certainly way better than many people have. this is important for music production.
om
Last edited by justanoldmuso; 05/12/2505:02 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I did a test with Open Hardware using a song I already had made up.
Song had 6 choruses, 54 bars long and had 5 Real Track instruments.
I first measured how many cores were used with the frozen track I had, then I changed it to 12 choruses and measured it generating the song. I finally changed it up to the maximum of 40 choruses and measured it generating the song. Even with the maximum generation going on, BIAB never used more then 5 cores to any degree.
See the attachments
BIAB2025 Windows 10 Pro WA6NCB No Longer on a Crappy Laptop!
Interesting. I noticed that you are using Win 10 pro while I am using Win 11 pro. If you could upload that song that song in this thread or on the free Dropbox I while check it out, but as it has already been indicated there is nothing we can do about how many cores BiaB uses.
Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer. It's called the Heineken Maneuver.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Start BiaB playing a looped song then start the open hardware monitor and it will show you how many cores are being used.
Hmmm ... my first thought was "I thought task manager already did that", but I couldn't find it ... maybe it's Linux only? Nope. Found it.
On task manager, click "Performance". then right-click on the CPU graph and select "Change graph to"->"Logical processors" and you'll get a use plot for each core.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Hmmm ... my first thought was "I thought task manager already did that", but I couldn't find it ... maybe it's Linux only? Nope. Found it.
On task manager, click "Performance". then right-click on the CPU graph and select "Change graph to"->"Logical processors" and you'll get a use plot for each core.
Thanx Gordon. I didn't know about the right click on the graph. There is a lot more information there also.
Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer. It's called the Heineken Maneuver.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Hmmm ... my first thought was "I thought task manager already did that", but I couldn't find it ... maybe it's Linux only? Nope. Found it.
On task manager, click "Performance". then right-click on the CPU graph and select "Change graph to"->"Logical processors" and you'll get a use plot for each core.
Thanx Gordon. I didn't know about the right click on the graph. There is a lot more information there also.
BTW, I think this must be 'Threads' rather than 'Cores' as I have 12 graphs but only 6 cores. That terminology has always puzzled me because I think of 'threads' are different. I guess it just means each core has two sets of working registers. Or something.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Hmmm ... my first thought was "I thought task manager already did that", but I couldn't find it ... maybe it's Linux only? Nope. Found it.
On task manager, click "Performance". then right-click on the CPU graph and select "Change graph to"->"Logical processors" and you'll get a use plot for each core.
Thanx Gordon. I didn't know about the right click on the graph. There is a lot more information there also.
BTW, I think this must be 'Threads' rather than 'Cores' as I have 12 graphs but only 6 cores. That terminology has always puzzled me because I think of 'threads' are different. I guess it just means each core has two sets of working registers. Or something.
Yes I caught that also. But mine says 10 cores but only 16 graphs labeled Local Processors. It is very confusing for sure. Googling local processors wasn't much help either.
Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer. It's called the Heineken Maneuver.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
BTW, I think this must be 'Threads' rather than 'Cores' as I have 12 graphs but only 6 cores. That terminology has always puzzled me because I think of 'threads' are different. I guess it just means each core has two sets of working registers. Or something.
Yes I caught that also. But mine says 10 cores but only 16 graphs labeled Local Processors. It is very confusing for sure. Googling local processors wasn't much help either. [/quote] There often seems to be a few fewer threads than twice the number of cores ... I imagine they're related to the performance cores, not the efficiency cores. Not the kind of processors with which I'm most familiar, so I'm guessing a bit here.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Unfortunately I think all of those articles are describing threads as I know them best, but in that context one can have many threads per core. All the processor specs I see list a fixed number of threads that is usually double or often a few fewer than double the number of cores.
I don't really know for sure what they're trying to tell us other than "mine's bigger than yours".
Some processors I've used in the past have multiple register sets that can be exchanged almost instantly, allowing a context switch in nearly zero time to a different set of data and probably code. I suspect what they're telling us is that some of the cores can do that because they have two sets of registers.
'Traditional' threads and/or processes would require most or all of the register content to be swapped in and out of those registers, costing time. Bu there's no inherent hardware constraint to that, so I think that's not what they mean.
I guess I could go and do some proper research on that, but I'm unlikely to much care now ... I no longer write operating systems.
Edit: if anyone cares, there's an explanation of Intel's 'hyper-threading' on Wikipedia, which says something akin to my "exchanged registers" above: Hyper-threading
Last edited by Gordon Scott; 05/14/2509:51 AM.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean