Problem Statement: Intermittent and random problems are the toughest to solve. I'm experiencing intermittent noise, static and crackle when I play any audio. The crackle will last for only a fraction of a second or so and the music will smoothly continue as if nothing happened. The crackle seems to be on top of (external to) the music as opposed to being in the music. The source of the music could be a Studio One track, an MP3 file being played by Windows Media Player or a YouTube video on the web. The crackle may happen only one, two or three times a day but if I happen to be recording my bass or keyboard it will throw me “out of the zone”. The crackle has happened once while I was recording and did not appear in my recording.
Background: I recently made 3 major changes to my system. 1. I upgraded my i5 machine to an i9 2. BiaB 2023 UltraPak is now installed on an external drive; not on the C: drive 3. I upgraded from Studio One version 5 to version 6
With my older i5 machine I never experienced noise or crackle . . . ever.
Over the past couple weeks I’ve spoken to 2 Dell Tech Support engineers and 1 supervisor (all based in India) and although they are motivated to help me they are not audio engineers and seem baffled. They and I confirmed/installed the latest audio and Tascam drivers, disabled NVIDIA and set the power option to “High Performance” all to no avail.
I also notice a strange symptom that may be related. For no apparent reason, an F: drive Windows explorer window will appear unexpectedly even if BiaB is not running. The only thing on F: is BiaB. If I close this window, it will magically reappear at a later time. It’s as if this window wants to be active all the time despite me shutting it down.
Next Steps: I’m thinking my next steps are 1. Solicit suggestions from this forum 2. Disconnect the F: drive for a few days to see if this helps 3. Contact Tascam (they have shown lukewarm interest to help on past questions) 4. Contact JBL 5. If required, re-contact Dell Tech Support again
There are smart people in this forum like Mario who solved my “M on the diagonal” bass panning issue so I’m hoping some suggestions will come in for this problem.
Thanks in advance for any ideas.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
As some OSs open a window to a newly-connected external drive, that might point to the physical connection, or possibly a conflict issue with the drive. I'd be tempted perhaps to try it on a different USB port, or do as you say and remove it for a while to see if it changes anything.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
Check to see if the Tascam has an update. My Presonus equivalent crackles and pops when it wants updating.
...Deb
Good idea Deb, this was one of the 1st things I verified. According to their website, I'm up to date.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
As some OSs open a window to a newly-connected external drive, that might point to the physical connection, or possibly a conflict issue with the drive. I'd be tempted perhaps to try it on a different USB port, or do as you say and remove it for a while to see if it changes anything.
Thanks for the input Gordon. I have disconnected the F: drive altogether to see if the problem goes away.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
The Dell website has a utility application named the Dell Support Assistant. The application must be downloaded and installed onto your computer. The application scans your computer hardware and installed hardware drivers. The application then offers to install the latest verified version of any hardware drivers that are newer than what is installed on your computer.
Dell has become aggressive with testing and offering new hardware drivers to keep ahead of malware and Trojans. I'm finding motherboard bios and motherboard support chips are updated quite often.
It's possible the issue you're experiencing has an undocumented hardware driver fix.
The Dell website has a utility application named the Dell Support Assistant. The application must be downloaded and installed onto your computer. The application scans your computer hardware and installed hardware drivers. The application then offers to install the latest verified version of any hardware drivers that are newer than what is installed on your computer.
Dell has become aggressive with testing and offering new hardware drivers to keep ahead of malware and Trojans. I'm finding motherboard bios and motherboard support chips are updated quite often.
It's possible the issue you're experiencing has an undocumented hardware driver fix.
Hey Jim, we are totally on the same page. I have SupportAssist installed and I have used it to optimize/update my system.
My latest thinking is that the Tascam Interface may not be connected to the most ideal USB port. I have a USB 3.2 Gen 1, a USB 2.0 with Smart Power On, and a couple USB Type Cs. Hopefully it's that simple.
And as you alluded to, a complete virus scan wouldn't hurt.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
Good info so far. My number one idea was already discussed, remove that F:\ drive. Hopefully you're able to hit your PC specs to find out the best USB port speed-wise.
If what you've done so far is not working maybe tweak the buffer size on the interface.
Your describe the problem well. Check you assignment of audio conversion rate: 44.1 kHz versus 48 kHz audio. You have a mismatch. They have to match on your PC application and on the audio device used.
"Windows explorer window will appear unexpectedly even if BiaB is not running. The only thing on F: is BiaB."
This likely related to either the faulty drive, which connects / disconnects (unlikely) or to your Power Management settings for USB which puts drive to sleep and then wakes it up, which sparks an idea about your Tascam.
Are your Power Settings set to Maximum Performance? There is a setting in advanced Power Menu that deals with USB It is named: USB SELECTIVE SUSPEND SETTING
If it is "enabled" try "disable" option to give full power to USB port, see if it solves at least one of the issues.
Good info so far. My number one idea was already discussed, remove that F:\ drive. Hopefully you're able to hit your PC specs to find out the best USB port speed-wise.
If what you've done so far is not working maybe tweak the buffer size on the interface.
Thanks Steve (your mamma named you well)
BiaB and the F:drive have been exonerated in this. I disconnected the external drive and the glitches still happen.
Regarding the buffer size, you didn't say which way to tweak. I'm thinking bigger is better. So I tried, 512, 1024 and 2048. Each setting produced the crackle. I'm currently running at 128 . . . and it just glitched. It seems like I'm able to get it to glitch easier now.
Also ran a full virus scan . . . squeaky clean.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
Your describe the problem well. Check you assignment of audio rate: 44.1 kHz versus 48 kHz audio. You have a mismatch. They have to match on your PC application and on the audio device used.
Thanks Dan, but I'm not fully following your thought.
My sample rate is at 44.1 kHz as reported by my interface software. You can see this in my reply to Deb.
I see no 48 kHz anywhere.
Why do you say I have a mismatch?
What do you mean by my "PC application" and the "audio device"?
If PC application you mean Studio One, I believe Studio One grabs the sample rate from the interface software. And Studio One shows 44.1 kHz.
If PC application you mean Windows Media Player, I can't see how to display it.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
When you describe "...Intermittent and random problems ... experiencing intermittent noise, static and crackle when I play any audio. The crackle will last for only a fraction of a second or so and the music will smoothly continue as if nothing happened." That screams audit conversion rate mismatch.
You tell you have looked everywhere, but have you?
Originally Posted By: Bass Thumper
I see no 48 kHz anywhere.
Why do you say I have a mismatch?
What do you mean by my "PC application" and the "audio device"?
If PC application you mean Studio One, I believe Studio One grabs the sample rate from the interface software. And Studio One shows 44.1 kHz.
If PC application you mean Windows Media Player, I can't see how to display it.
In Win 11 you need to set Studio One to the same sample rate as your Taskam and as your Windows drivers for your Audio Card.
Go to the Win 11 Search and type "Sounds". You will see this. Is you audio card set to 44.1K or 48K?
"Windows explorer window will appear unexpectedly even if BiaB is not running. The only thing on F: is BiaB."
This likely related to either the faulty drive, which connects / disconnects (unlikely) or to your Power Management settings for USB which puts drive to sleep and then wakes it up, which sparks an idea about your Tascam.
Are your Power Settings set to Maximum Performance? There is a setting in advanced Power Menu that deals with USB It is named: USB SELECTIVE SUSPEND SETTING
If it is "enabled" try "disable" option to give full power to USB port, see if it solves at least one of the issues.
P.S. Try a different USB port.
Hey Rusty, BiaB and Drive F: have been exonerated because I disconnected the Drive F: USB cable at the PC USB port and the glitches still happen. So we can't blame F:
You have a good idea about trying a different port. I inserted my printer USB cable into the USB port that has been connected to the interface. And inserted the interface cable into the USB port that has been feeding the printer. I sent a page to the printer and it printed fine. Then I fired up Studio One and played a song. The song played perfect with no glitch which is hopeful but says very little. It may take some time for the glitch to appear because it's an intermittent issue. Thanks for suggesting this . . . we'll see if it's a permenant solution.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
When you describe "...Intermittent and random problems ... experiencing intermittent noise, static and crackle when I play any audio. The crackle will last for only a fraction of a second or so and the music will smoothly continue as if nothing happened." That screams audit conversion rate mismatch.
You tell you have looked everywhere, but have you?
Originally Posted By: Bass Thumper
I see no 48 kHz anywhere.
Why do you say I have a mismatch?
What do you mean by my "PC application" and the "audio device"?
If PC application you mean Studio One, I believe Studio One grabs the sample rate from the interface software. And Studio One shows 44.1 kHz.
If PC application you mean Windows Media Player, I can't see how to display it.
In Win 11 you need to set Studio One to the same sample rate as your Taskam and as your Windows drivers for your Audio Card.
Go to the Win 11 Search and type "Sounds". You will see this. Is you audio card set to 44.1K or 88K?
OK Dan, I get now what you are saying. See below for my settings (44.1 kHz). And if I hit "Test", I get the chimes thru the monitors. Sorry for being slow.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
Bass Thumper, Your "power settings" should be set to Maximum Performance in audio recording computer. With the specs you got, if you don't have that set to Maximum, is like driving a Ferrari at 25MPH on highway.
Bass Thumper, Your "power settings" should be set to Maximum Performance in audio recording computer. With the specs you got, if you don't have that set to Maximum, is like driving a Ferrari at 25MPH on highway.
Is this what you mean by "power settings" ? If so, the Dell engineer suggested the High Performance setting a few days ago when I showed him the Tascam message shown above in the Setup Diagram.
PS> Your idea of swapping USB ports is still holding steady . . . no glitches so far.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean