What am I doing wrong? I want a nice, clean "sheet music" looking notation, where the notes aren't all jumbled on top of each other and it is clear what each note is. This is so hard to input notes. I can't imagine getting the whole song to work like this. It's so painful. I tried importing a musicxml from MuseScore, but it omitted all the breaks and symbols so it wasn't usable. So I'm trying to input it directly, but not like this. It's just so hard to see what I'm doing and each note is an adventure. Like, if the note is middle C or lower, I have to put it in a random spot then edit the note and set the exact letter. I can't just place it where I want it. Why is this so hard?
There are various display settings for the Notation window when clicking on the [Opt] button on the left hand side; there might be something that could be adjusted there. You could post a picture of your settings and then we can compare.
Also, a few other notation questions: 1. When I try to put a note below middle C on the treble clef, it won't make the note. I have to put it at middle C, then "edit note" and move it down to the note I want. This is tedious. Is there a way to make it so I can input lower notes? 2. In a lot of cases, when I switch the note, it only offers me a flat option (not sharp). So I select Bb and it puts the B note with the flat marker. Is it not possible to instead make it an A with a sharp symbol? I tried the "force accidental" option, but it didn't do anything. 3. When using the scroll bar at the bottom to scroll through measures, it always goes ahead 4 measures. What if I want to see measure 4 and 5 next to each other? I haven't found a way to advance just to the next measure and see the previous 3 still on the page. 4. When importing a musicxml, it loses all the repeats. Is there a way to import the whole notation? It would be so much easier to be able to input this stuff in MuseScore then just import it. 5. When I try to add a repeat to a section, it makes a copy of the section in gray, then it plays the repeated part and the gray part at the same time. Not sure if I'm explaining this one right. How can I make it so it just has the 2 dots for the repeat, and just plays that section twice without adding the gray section?
Sorry one more question... I managed to input the whole melody, re-inputting where necessary for a total of 32 measures. I set it to play the "chorus" 4 times. But for some reason it only plays the melody the first time and not the subsequent 3 times. Is there a way to make it play the melody on the 1st and 3rd chorus? (I want to alternate playing rhythm and lead.
Sorry one more question... I managed to input the whole melody, re-inputting where necessary for a total of 32 measures. I set it to play the "chorus" 4 times. But for some reason it only plays the melody the first time and not the subsequent 3 times. Is there a way to make it play the melody on the 1st and 3rd chorus? (I want to alternate playing rhythm and lead.
Hi Milky.
From a notation perspective.... In BIAB, each chorus is a is independent. To copy your first chorus's melody to all the other choruses, go to the Melody Menu (at the very top of BIAB) and follow the 1, 2, 3, 4 on the image below.
What am I doing wrong? I want a nice, clean "sheet music" looking notation, where the notes aren't all jumbled on top of each other and it is clear what each note is. This is so hard to input notes.
"Jumbled" means they are out of order. But they aren't "jumbled", they are just closely spaced, so they are overlapping.
Unlike many notation programs, BiaB has a fixed bar size, so it won't get wider to accommodate more notes in a bar.
Instead, reduce the number of of bars/screen, so the bars are wider and there's more room for notes.
Press the "Opt" button in the notation and choose a smaller number for Bars/Screen.
Quote:
When I try to put a note below middle C on the treble clef, it won't make the note. I have to put it at middle C, then "edit note" and move it down to the note I want. This is tedious. Is there a way to make it so I can input lower notes?
BiaB arbitrarily chooses Middle C as the "split point". If you click on the bass clef, you can enter notes at Middle C and below.
If you want the split point to be a different note, choose Opt, and put a different value Clefs split at under Transpose Options.
Quote:
In a lot of cases, when I switch the note, it only offers me a flat option (not sharp). So I select Bb and it puts the B note with the flat marker. Is it not possible to instead make it an A with a sharp symbol? I tried the "force accidental" option, but it didn't do anything.
BiaB follows the key signature set in your song. Make sure the Key has been set properly on the main screen.
Quote:
When using the scroll bar at the bottom to scroll through measures, it always goes ahead 4 measures. What if I want to see measure 4 and 5 next to each other? I haven't found a way to advance just to the next measure and see the previous 3 still on the page.
Go to the Opt button above the notation, and change the Scroll Ahead value.
Quote:
When importing a musicxml, it loses all the repeats. Is there a way to import the whole notation? It would be so much easier to be able to input this stuff in MuseScore then just import it.
I don't know, but based on your experience, I'd say no.
Quote:
When I try to add a repeat to a section, it makes a copy of the section in gray, then it plays the repeated part and the gray part at the same time. Not sure if I'm explaining this one right. How can I make it so it just has the 2 dots for the repeat, and just plays that section twice without adding the gray section?
I don't see what you're describing, but I'm going to make a guess.
The "gray section" indicates the section is past the end of the song.
On the main screen, the Start and End are displayed. Click End either type in the correct bar number where the song ends (excluding the tag) or click the cell the bar is in. It looks like a modal dialog where you can't do that, but you can interact with the song sheet behind the popup dialog.
For the forced accidental issue, it was an A sharp and the song is in the key of G. That key doesn't have an A sharp or B flat, so no reason the key should have forced it to be flat. But, going back in the song now, the "forced accidental" option is allowing me to change it to A sharp. Not sure what changed.
The repeats issue was not at the end of the song. It was at the end of the first section (the A section repeats, then the B section repeats). It put the gray measures after the repeat symbol and then I'm not sure what was going on. I haven't figured out how to turn off the real tracks so I just heard like 2 versions of the real track over each other, apparently repeating from the beginning and playing the gray measures at the same time. Anyway, I solved this by just abandoning repeats and I just duplicate the whole section and key in the chords and melody twice. It's a pain but it gives me the backing track so in the end I have what I need.
Anyway, I solved this by just abandoning repeats and I just duplicate the whole section and key in the chords and melody twice. It's a pain but it gives me the backing track so in the end I have what I need.
Cut and paste allows you to copy the chords and melody from cells to another set of cells, so you don't have to re-enter the same information.
Anyway, I solved this by just abandoning repeats and I just duplicate the whole section and key in the chords and melody twice. It's a pain but it gives me the backing track so in the end I have what I need.
Cut and paste allows you to copy the chords and melody from cells to another set of cells, so you don't have to re-enter the same information.
Another way is via the Edit menu and Copy/Move Tracks.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean