You guys are much more versed in this issue than me. Basically, it's a well know issue that the Window's MIDI over USB driver is a single client driver. This seems to go as far back as Win XP and exists today through Win 11. Even with some MS claimed improvements in the driver, it's still a single client driver. We're not talking about audio multi-client drivers here, this pertains to MIDI only.
What this means is that when BIAB or RB grabs the driver for MIDI over USB, no other application can then use MIDI over USB. It is strictly single client. In my case, I'm trying to run RB with a Helicon Voicelive Extreme and use the Voicelive Editor software and RB or BIAB at the same time. I can run RB / BIAB with the Helicon unit but as soon as I start the VoiccelIve Editor software it will not connect to RB / BIAB. Conversely, If I run the Helicon unit and the Editor software, RB / BIAB will throw and error when using the MIDI out to the Editor software.
I've tried using MOTU and Focusrite multi-client drivers but these seem to be audio only. I've also tried LoopBe1 and VoiceMeter Banana...no success. Again, what I'm looking for is MIDI over USB not audio via USB. My multiclient audio drivers have no problem with my setup, MIDI is the problem.
There must be a way around this as it's such a common problem, but the solution is way above my paygrade! Some of you guys are well into the workings of various software packages and may know a way around this.
Jeff, As I understand your predicament you're wanting to exchange midi data between one hardware device, the Helicon Voicelive Extreme, and multiple software programs, the Voicelive Extreme editing software + Band-in-a-Box or RealBand, is that correct?
If you are willing to purchase a multi-client usb midi driver, +++ Loop Be 30 +++ may suit your needs. That is the only solution I am aware of.
I think that is a BIAB limitation! I run two keyboards over USB with Win 11, no problems. Also run a midi controller via USB at the same time. As well as my midi in and out via the MOTU Audio Express. So I never have issues with MIDI routing except back in the day when I tried to run Helicon Voicelive and use the Voicelive Editor software with BIAB.
Do you have other programs you could use? I say this because I can use my midi drivers sending PC and CC across different apps and devices without any problem (so far).
So here is my setup: I use BandHelper from my Android device to send wireless MIDI PC and CC to change Presets in my Line 6 Helix using WidiMaster Bluetooth MIDI attached to Helix, in turn, Helix sends the same commands via USB to Gig Performer4, changing Rackspaces to make use of Midi Guitar 2 which in turn trigger Softsynths.
At the same time I use SongMaster Pro to automatically trigger PC to Helix during playing backing tracks. When the playhead reaches the programmed marks, it changes the guitar effects for me.
At the same time I Start, Stop, Mute or Solo Tracks and Stems using Nanokontrol2 Midi Controller on SongMaster.
Everything is working perfectly and all at the same time.
So, I use these MIDI Drivers: 1) BLE Midi 2) Nanokontrol2 USB 3) Line 6 Helix USB 4) Loobe1 (used between Applications).
All of the above is under Windows 11.
I am not surprised if PG software does not work well... I am having Audio issues with it that I do not have with other software manufactures, hence I did not give my money to PG Music this year, instead, I allocated it towards SongMaster Pro, What a great Application that is for practicing and Live gigs!
Hi Guys! Appreciate all of the comments. Here's my responses to your questions:
1. I have a Focusrite 8i6 audio interface, a MOTU Micro Lite MIDI interface, MOTU 828 Mk3 interface and a MOTU Express XT MIDI interface. I have had no success with any of these interfaces. I have no problem with audio, I can run multiple audio apps, stream from the internet, run RB and BIAB at the same time...all with no issues. All have multi client audio drivers.
2. I can run RB/BIAB and send MIDI info to the VoiceLive 3 with no problem on any of the above interfaces OR I can run the Voicelive Editor and control the VL3 with no problem. The problem comes up when I try to run RB/BIAB AND the VoiceLive Editor at the same time. Doing this results in an "out of memory" error in RB...even though I have 32Gb of memory.
3. What seems to be happening is that whichever application is opened first...either RB/BIAB or the VoiceLive Editor...that application grabs the MIDI over USB driver and then does not allow the other applications to access MIDI over USB.
4. This appears to be a well known problem with Windows that does not appear on MAC's. As I understand this, it happens because the VoiceEditor software and RB use a class compliant USB MIDI driver that is provided by Windows. This driver is a single client driver only.
5. I can get around this using MIDI 5 pin DIN's. If I run DIN's from the VL3 to any of my interfaces everything works fine....I can run RB, the Voicelive Editor, the VL3 and all my synths with no problem and control of each. While MIDI over USB would be 100's of times faster, MIDI with DIN's does work...just slower. So why not continue this way? The new version of the VoiceLive Editor supports MIDI over UISB only!
I will continue to explore this issue. Will try to run MIDIOX and LoopMidi today to see if I can get around this limitation. In the mean time any and all ideas are most appreciated.
It's funny, I think, but until I started using BIAB and therefore music stuff on Windows, I'd had no idea that this was an issue. In my naivety, I'd presumed that Windows has similar MIDI/audio routing abilities to Linux. I have to say that it came as a bit of a shock to find such a fundamental limitation. Linux has the reverse problem ... too many different ways to do it, which therefore sometimes need bridges between systems.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
I have no idea what y'all are talking about. I run three different keyboards simultaneously. Two with MIDI over USB and the third via 5 pin connectors through my Behringer BCF 2000 which itself is MIDI over USB.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
I do it by selecting Multiple MIDI drivers in RB Preferences - Options Then select the driver for a given tracks Port in the Track Port .. but this may not work for multiple internal softwares trying to share a driver .. but if you could loop the MIDI out to hardware devices and back in you may be able to select the other Driver in one of the softwares .. just spitballin'
I'm pretty sure I run RB using my Focusrite MIDI In/Out and Kontakt via my Juno MIDI device .. so if you can avoid using Windows driver and employ other drivers there might be a way.
Last edited by rharv; 01/16/2405:06 PM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
Appreciate all of your input and help guys. I did get a response back from Pete Brown, Product Manager at Microsoft, who's team is developing the next version of MS's USB driver. Seems there is no good config for my situation, guess I'll just stay on the older version of VoiceLive Editor and use 5 pin DIN's. Here, by the way, is Pete Brown's response in regards to my questions about single client MIDI over USB:
Yes, the current API implementations are single-client. There are some hacks for some devices where they implement multi-client in the driver, but to do it properly meant we had to rewrite MIDI on Windows from the ground up, which we are. New driver, new Windows Service (the older APIs go direct from API to driver and so have no way to plug into them), new API.
The new API we're delivering later this year is multi-client by default, and we're doing everything we can to plumb that back into the existing APIs so that, while they won't get all the goodness of MIDI 2.0, they'll get multi-client support. We need to do a ton of testing to ensure it doesn't break any existing apps, though.
For apps that use the new API directly, they also get outbound message scheduling, MIDI 2.0 features like increased resolution, new transports like Network MIDI 2.0, and more.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean