I looked through my effects and I do not have a de-esser. I just read that I can do it manually in Studio One Pro but it looks a little intensive. Has anyone one had success with a de-esser? The Waves one looks good but I have no experience at all in this area.
Thanx in advance for your time and suggestions.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Mario, I find Waves Sibilance more useful than the de-esser module in Nectar.It has some useful presets and more adjustments... still often need to fine tune with volume envelopes though.
We have three de-essers but have not used them (Logic Pro, Nectar 2 & Waves).
While not designed specifically for de-essing we’ve found that a pop filter along with specific mic placement prevents the problem. On the other hand perhaps Janice isn’t an esser Dunno.
Noel, I just learned how to do that in Studio One Pro prior to viewing your video. The manual process is identical. This is the most time consuming method but looks like the most precise. I don't do a lot of vocals, (surprised?) so I was lacking in some vocal techniques.
Beatmaster, that is a good tip that I just might try.
Floyd, I looked but didn't see it. I shall look again as I'm sure that it is there; my eyes ain't what they used to be!
J&B, I did read an article explaining this technique and I will try it the next time I record a vocal.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
I second Roberts recommendation for the Waves Sibilance plugin (not to be confused with the Waves DeEsser plugin which is different and not nearly as good)
It's very good indeed, I use it all the time here.
Here is THE best way that I have found to DeEss a vocal. Since you have Studio One Pro, you will be able to relate to all these instructions...
Expand the vocal in an area where you know there is an Ess (that's what I'll call them - they can be other things - "cht" etc.) Solo the track to listen - easy to hear them that way...
There is always an identifiable wave shape there. It is kind of cigar shaped and it will be very dense (picture 1 - right in the middle).
Cut on either side of that. Right-click that cut section and select "Decrease Volume". For a few you might need to do that twice, but generally, once is enough.
This almost ALWAYS works for me. And the result is almost ALWAYS better than using any plugin I've ever tried.
Pictures 2, 3 and 4 show examples that have this done... Pic2 is an Ess at the beginning of a word. Pic3 is an Ess at the end of a word. Pic 4 shows the phrase "the sun". The first blob ("the") is left alone. The 2nd blob is the actual Ess. The third blob is "sun" which was a bit harsh. This part of the vocal now sound just as it should...
I'm with Floyd on this one. I use exactly the same technique on POP noise as well - words starting with "P" or "B".
Having said that, I always try to get people to sing past the mic from about eight inches away, rather than into it. It avoids proximity effects and I prefer this to a POP screen. I don't get any appreciable drop in signal and it avoids a lot of problems.
Floyd, that technique I viewed on a Studio One Youtube video but I haven't tried it yet.
Rog, I have also used that technique for POP noises but I didn't think to use it on esses. Also thanx for the singing technique. I have a POP filter so with this technique it should lower both issues.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Hi Mario, since you already have a De Esser built into Studio One Pro it is quite easy to use. It can be found in the compressor vocal presets. In the sidechain section of the compressor select Int. Sidechain Filter and find the frequency of the s' by clicking the listen button and sweeping the frequency. You can narrow this down and also adjust how much to compress the the frequency when it passes its threshold. I also have IK De Esser which works great as well as Nectar 3.
BIAB 2024 Ultrapack- Studio One Pro 6.5 Windows 10
You can do this in Melodyne as well and works very good. The Blob will not have any waveform that contains the "S" and is rather easy to id. From there you can decrease the amplitude of the Blob. Which is very similar to adjusting the clip gain in Studio One. There are many ways to deal with them "ess".
BIAB 2024 Ultrapack- Studio One Pro 6.5 Windows 10
Hi Mario, since you already have a De Esser built into Studio One Pro it is quite easy to use. It can be found in the compressor vocal presets. In the sidechain section of the compressor select Int. Sidechain Filter and find the frequency of the s' by clicking the listen button and sweeping the frequency. You can narrow this down and also adjust how much to compress the the frequency when it passes its threshold. I also have IK De Esser which works great as well as Nectar 3.
Yep, I did find it. The next time I record a vocal I have a lot of options to use. Thanx to all for this important information.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
You can do this in Melodyne as well and works very good. The Blob will not have any waveform that contains the "S" and is rather easy to id. From there you can decrease the amplitude of the Blob. Which is very similar to adjusting the clip gain in Studio One. There are many ways to deal with them "ess".
Good idea as I have the Editor version. Using Melodyne I will be able to pitch correct and de-ess in the same window.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
You can do this in Melodyne as well and works very good. The Blob will not have any waveform that contains the "S" and is rather easy to id. From there you can decrease the amplitude of the Blob. Which is very similar to adjusting the clip gain in Studio One. There are many ways to deal with them "ess".
Good idea as I have the Editor version. Using Melodyne I will be able to pitch correct and de-ess in the same window.
Yes sir that is when I deal with the "ess" myself. Melodyne is not just for pitch correction it can work magic on a track if you know how to use it.
BIAB 2024 Ultrapack- Studio One Pro 6.5 Windows 10
You can do this in Melodyne as well and works very good. The Blob will not have any waveform that contains the "S" and is rather easy to id. From there you can decrease the amplitude of the Blob. Which is very similar to adjusting the clip gain in Studio One. There are many ways to deal with them "ess".
Good idea as I have the Editor version. Using Melodyne I will be able to pitch correct and de-ess in the same window.
Yes sir that is when I deal with the "ess" myself. Melodyne is not just for pitch correction it can work magic on a track if you know how to use it.
Brian, I have used Melodyne to raise or lower note volumes and to lengthen, shorten, and/or change note values. I never thought about using it as a de-esser until you mentioned it.
PS - I never said that I was the brightest crayon in the box
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.