You need to be logged in to post
Options
Index
#378682 - 12/01/16 01:22 AM [Band-in-a-Box Wishlist] Biab MultiRiffs an Easier Way
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
So to create MultiRiffs in Biab much the same way as RealBand does.

If I have all my tracks in my DAW, recorded session or BB tracks, so I need some solos or instrument fills.

I have set the solo/fill section to start earlier or end later as in RealBand's MultiRiff's, in BB I just highlight a bar before and after.
Using F5 I mute the tracks @ bar 1, un-mute @ bar 8, mute @ bar 13.
If you can automate the muting of all bars that are not highlighted (except Audio slot without having to F5), and then generate up 7 of the same RTs (this should be quick as the other bars are muted, actually empty), so if you highlight the bars then go up to a "MultiRiff" button that will let you choose the RT you want and then mutes the non selected bars and gives me 7 RT Solos/Fills to choose from.
With my downmixed stereo file loaded into the audio track I can find one that fits (you can even look at the notation of each of the 7 Riffs beforehand that you can't do in Realband), all we need to do is solo a riff and the Audio track, hit play or highlight a section and loop it, this will play our song Audio track along with it til we find one that fits while BB is looping, or generate up 7 again with Play/Generate button, then drag it out, either the section bars by highlighting them or the whole track without highlighting any bars.
You can also drag the RealCharts out to your DAW, click your notation window.
Once we have ReWire implemented soon, BB as Master and DAW as slave, you can use MultiRiffs with ReWire instead of having to load your downmix into the BB Audio track.
So as you hit play in BB the slave DAW will follow BB start/stop/continue/loop.



Attachments
Post attachments only available when logged in


Edited by Pipeline (12/01/16 01:36 AM)
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#401639 - 03/19/17 06:18 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
DropBox > click No Thanks Continue..
BB-MultiRiffs.mp4
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#461115 - 03/08/18 06:22 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 11/11/12
Posts: 3977
Loc: Iceland
Icelander Offline
Veteran

Registered: 11/11/12
Posts: 3977
Loc: Iceland
I would give my plus or not comments...if I understood one word of any of the above confused
_________________________
YT: www.youtube.com/user/MrIcelander
SC: https://soundcloud.com/eddie-icelander
Never finish what you can't start!
____________________________________________
BBox 2020 UltraPak, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)

Top
#461122 - 03/08/18 07:04 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Icelander]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
In a nutshell, the above is creating Multiriffs in Biab the same way that they are created in RealBand.
This way was pointed out to show Win uses that don't or can't use RealBand or Mac users that don't have RealBand, how to create MultiRiffs.

All the tracks are save to a stereo track except the realtrack instrument you want to create 7 Multiriffs to choose from.
That saved stereo track is then loaded into the Audio track of the song, then the same RealTrack is loaded in each of the 7 Biab tracks,
F5 is used on each track to generate the instrument only from bar 8 to 12, this works the same as RealBand generating a MulltiRiff for the selected bars.

Now you solo the audio track and solo the first track,
you play this and see how it sounds, if it fits good then highlight bars 8 to 12 and drag export it into bar 8 of your DAW, or don't highlight and drag export the whole track to your DAW,
else solo track 2 and play as it might play a better Riff or track 3 or 4 or 5 or 6 or lucky 7. If you still can't find a suitable riff then just hit the regenerate all.

As mentioned above, if PG would automate the muting of all bars that are not highlighted (except Audio slot without having to F5 mute track , un-mute track), and then generate up 7 of the same RTs.
(this should be quick to generate up as the other bars are muted, actually empty),
This could be done with one button "MultiRiff" as you click the button it will bring the RealTrack picker window up, you select the RT > OK > Biab will then generate up the 7 tracks to the whole chord sheet or just the selected bars if selected.
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#461140 - 03/08/18 08:31 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 08/20/11
Posts: 6372
Loc: Winston-Salem, NC USA
Jim Fogle Offline
Veteran

Registered: 08/20/11
Posts: 6372
Loc: Winston-Salem, NC USA
Originally Posted By: Pipeline
In a nutshell, the above is creating Multiriffs in Biab the same way that they are created in RealBand. Snip ...


So Pipeline, the wishlist request is for PG Music to add a multi-riff button to the Band-in-a-Box toolbar. Clicking the button would cause the actions you described above to happen, is that correct? If so, +1.
_________________________
Jim Fogle - 2020 BiaB (730) RB (Build 5) Ultra+ PAK
Cakewalk - Zoom MRS-8 recorder
Desktop: i7 Win 10 build 2004, 12GB ram 256GB SSD, 4 TB HDD
Laptop: i3 64bit Win 10 build 2004, 8GB ram 500GB HDD
Music at: http://fogle622.wix.com/fogle622-audio-home

Top
#461170 - 03/08/18 11:56 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 06/25/12
Posts: 2814
JohnJohnJohn Offline
Veteran

Registered: 06/25/12
Posts: 2814
Pipeline, if only PGM would hire you on a contract basis I feel we would get some cool features that are truly useful really fast.

Top
#461173 - 03/08/18 01:02 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: JohnJohnJohn]
Registered: 06/05/12
Posts: 11358
Loc: Melbourne, Australia
VideoTrack Online   content
Veteran

Registered: 06/05/12
Posts: 11358
Loc: Melbourne, Australia
+1 to Pipeline's idea.

+1 to JJJ's idea.
_________________________
BIAB&RB2020(Audiophile),Win-10Pro, SonarPlatinum, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, KorgX3R, RodeNGT2, AM802mixer, NS40M StudioMonitors, Pioneer Act. Mons, AKG K271 Studio H'phones

Top
#461175 - 03/08/18 01:32 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 05/16/17
Posts: 1428
beatmaster Offline
Expert

Registered: 05/16/17
Posts: 1428
Real clever thinking awesome stuff..!!
_________________________
win 10 64 bit 16gb, ssd 500gb, Alesis multimix8 usb,ketron sd,Roland BK-7M, 1000,shure sm7b,sonar,acid,mixcraft, variety of plugins.Sample tank 3, TC Helicon Voicelive 3 2 ,Byerdynamic 770 pro, akg k270,akg k701.
https://beatmaster1.bandcamp.com/releases

Top
#461206 - 03/08/18 04:13 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: beatmaster]
Registered: 02/06/17
Posts: 23
Loc: Sydney NSW
Keith44 Offline
Enthusiast

Registered: 02/06/17
Posts: 23
Loc: Sydney NSW
+ 1

Top
#461214 - 03/08/18 05:43 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Keith44]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
I will try and explain it a bit more easier:


1. You have your song made up in Biab but would like to get the soloist to play a suitable riff at certain bars.

2. Mute the soloist track, Save my song.SGU

3. File > Save Special > WAV/AIFF .

4. Save song As my song - multiriff.SGU

5. File > Import Audio > choose the wav/aiff file you just save, or rename the wav/aiff to the same name as my song - multiriff.SGU my song - multiriff.wav and reopen the song and the file will load into the audio track.

6. Edit > Song Form > Unfold

7. Select the first track and select the RealTrack you want to Multiriff in the RealTrack picker.

8. In the top left of the picker select the next track and set it to the same RT and so on until all 7 are the same RT.

9. Hit F5 on Bar 1 and set each track to mute except the Audio track.

10. Hit F5 on Bar 9 set each track to Back to Normal except the Audio track.

11. Hit F5 on Bar 13 set each track to Mute except the Audio track.

12. Generate all with >+

13. In the mixer right click on the Audio track solo button and right click the solo button on track 1 then 2 then 3 etc..
to preview each Multiriff with the other instrument in the Audio track.

14. When you find the riff that fits highlight the bars and export via DROP and drag to the same bar number in your DAW or don't highlight to export the whole track.



Attachments
Post attachments only available when logged in
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#461226 - 03/08/18 06:30 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 10/08/15
Posts: 1130
Loc: Philippines
Trygve Larsen Offline
Expert

Registered: 10/08/15
Posts: 1130
Loc: Philippines
+1 to Pipeline's idea.

+1 to JJJ's idea.
_________________________
Forever Grateful, BUT, sometimes pissed of. wink
Trygve "Leo" Larsen
BiaB 2020, Windows 8.1, Intel Core i5 CPU, 270GHz, 32 Gb RAM
My OLD tracks on Soundcloud; https://soundcloud.com/trygve-larsen My NEW is unpublished
The Universe = Uni-verse ie one song.

Top
#500724 - 11/10/18 11:58 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Trygve Larsen]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
This is an update on how to create up a realtrack freezing sections that you want to keep and regenerating other sections, using the method above, you will be creating the track you need using up to 7 different sections using the F5 "Mute" or "Back to normal", so you keep the parts you like by setting the start of the section to default "......", the sections you don't want set the start of the section to "Mute" then "Back to normal if there's another section you want to keep.
The Muted sections will be generated on the other tracks, when done all the tracks will be merged to one track just how you want it or as near as can be.
I hope by Dec 2018 it won't be needed and this function will be implemented in BB19. !


Generate and solo the first section in track 1 to your liking then mute it with F5 where the good ends and Freeze the track.
Solo Track 2 (and Audio) Un-mute F5 at that bar, Generate the next section to your liking then mute it with F5 where the good ends and Freeze the track.
Solo Track 3 (and Audio) Un-mute F5 at that bar, Generate the next section to your liking then mute it with F5 where the good ends and Freeze the track.
Solo Track 4 (and Audio) Un-mute F5 at that bar......

Now mute the Audio Track and Drag Render the master to get your RealTrack.
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#500792 - 11/11/18 07:44 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 06/25/12
Posts: 2814
JohnJohnJohn Offline
Veteran

Registered: 06/25/12
Posts: 2814
Will all of the separate tracks line up properly? One thing I noticed in Realband is the riffs used to create tracks are of varying lengths.

Top
#500813 - 11/11/18 09:59 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: JohnJohnJohn]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
You mute the track where a riff ends then generate the next track to play from there this will work the same way that BB generates a whole track.
If track 1 plays good until bar 19 you F5 mute @ 19 and freeze it
now you can leave track 1 soloed (and the Audio track) now solo track 2 as well,
track 2 will be F5 mute @ 1 so now we F5 back to normal @ 19
hit play generate until we get it to flow and fit from track 1 bar 18 to track 2 bar 19 and on until a good section of playing ends and a bad bit starts, then mute, freeze, track 3 F5 back to normal... and so on.
Track 1 maybe give you good playing in the first and last chorus but the middle don't fit so you just generate the middle on track 2.
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top
#504894 - 11/29/18 01:13 AM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: Pipeline]
Registered: 04/01/07
Posts: 311
funkycornwall Offline
Journeyman

Registered: 04/01/07
Posts: 311
Yes agree totally that Pipeline possesses a fine analytical mind that is able to cut through to the core of difficult issues and produce solutions that work. This is something I am sure we are all really grateful for. I am sure also the folks at PG Music must be aware of his excellent contrinutions too.

Top
#518677 - 01/18/19 12:23 PM [Band-in-a-Box Wishlist] Re: Biab MultiRiffs an Easier Way [Re: funkycornwall]
Registered: 02/05/15
Posts: 5231
Pipeline Offline
Veteran

Registered: 02/05/15
Posts: 5231
_________________________
ReaTrak Integrate Biab & Plugin in Reaper
Free Biab & BiabVST Chord Picker Tool

Top


PG Music News
Band-in-a-Box® Country Music Add-ons!

Happy International Country Music Day!!!

You might not think of Band-in-a-Box® as a country music making machine, but you'd be surprised... there are OVER 850 Country RealTracks available!

See (hear?) the Country songs created by Band-in-a-Box® users when you check out the Band-in-a-Box® Radio playlists Country/EZ Listening/Folk 1 and Country/EZ Listening/Folk 2.

Feeling inspired to create your own Country song in Band-in-a-Box®? Pop into the RealTracks Picker and create your own custom country band by filtering for "Country" or choose an existing Country style within the StylePicker Window by choosing a "Country" Filter String (from the drop down menu).

Band-in-a-Box® 2020 French for Mac is Here!

Band-in-a-Box® 2020 apporte plus de 50 nouvelles fonctionnalités ! Des améliorations ont été apportées aux RealTracks (RealTracks vocales au son plus doux, Epaississement des RealTracks, fonctions RealTracks "Trouver un Subs" et Multiriffs). La majorité des RealDrums dispose maintenant de RealCharts (avec une notation Drums précise). Le nouveau navigateur d'artistes RealTracks permet la recherche d'informations/bios/liens/listes sur artistes RealTracks. Le nouveau navigateur de fonctions permet à l'utilisateur nouveau ou "tête en l'air" de trouver et d'utiliser facilement la plupart des fonctionnalités/raccourcis/documents à partir d'une seule fenêtre. L'égalisation du tempo permet de changer un morceau rubato enregistré en un tempo fixe. L'étirement audio temps/pitch a été amélioré (Elastique inclus). Il y a des améliorations un peu partout dans le SongPicker, les Intros automatiques avec Basse/drums ou drums seuls, l'extension du nombre de titres avec + 3.400 titres nouveaux, MusicXML, la guitare avec vues "gaucher" et "élève", la fonction glisser-déposer, l'affichage multi-fenêtres de l'Assistant Accord Audio et bien plus encore !

ACHAT / MISE À JOUR, & TÉLÉCHARGEMENT MAINTENANT!

Get Inspired with the Band-in-a-Box® Title Generator!

There can be many triggers that could inspire you to write a song... but what if you're wanting to write a song, and are having trouble finding the inspiration you need?

Jump start your creativity using the Title Generator feature in Band-in-a-Box®.

I love this feature - it delivers some beautiful results!

To access this feature:

Mac: select Edit | Chords | Auto-Generate Song Title menu command (control+shift+S). The song title will appear in the Title window! Repeat the Auto-Generate Song Title command until the program comes up with a suitable title for your song. Band-in-a-Box® will keep generating new titles for as long as it takes to get the right one.

Windows: click on the "Generate Title" button within the main screen of the program and you can choose to "auto-generate" a song title which will appear right in the Title field of your song, or for a more varied selection choose to "generate multiple titles" and you'll be taken to the Title Generator window, which can generate a list of 50 song titles for you!

I've just done this, and won't bother list all 50 here - but the "top 10" I've chosen from my generated list are:
Eloquent Laugh
Statuesque Luck
Considering a Rainbow
Brief Fling, Acknowledged
Something for a Sandpiper
Happy Runaround
Cheatin' Skies
Then Came a Rose
The Mention of My Love
Eternal Raincheck

Give it a try!

The resource for this feature can also be edited, allowing you to customize the results.
(to do this, review the file TITL1.TXT within the BB Data folder.)

Band-in-a-Box® - Loops-with-Style PAK Video Tutorial

Wondering how to use the Loops-with-Style PAKs in your songs?

Check out our latest video, where we explain installing Loops-with-Style PAKs, locating the content within the proram, and how to use them in either in Band-in-a-Box® or in other DAWs - Watch the video...

Learn about the Styles included, applying the Loops, how the Loops will work with your song settings, using these Loops in other DAWs, and more!

Note: this video was made using the Windows version, however the steps are the same for Mac.

Share Your Love for Band-in-a-Box®!

Want everyone to know how much you enjoy Band-in-a-Box? Submit a Video Testimonial today, and when we share it on our website and YouTube channel, we'll send you a FREE Band-in-a-Box® UltraPAK hard drive!

Check out some of the great Video Testimonials we've already received here.

For more information on this offer, click here.

Band-in-a-Box® 2020 German for Mac is Here!

Es gibt über 50 neue Funktionen in Band-in-a-Box® 2020! Es gibt Verbesserungen der RealTracks (weicher klingende Vokal RealTracks, RealTracks Verdickung, "Find-a-Sub" RealTracks und MultiRiffs). Die meisten RealDrums haben jetzt RealCharts (mit genauer Drum-Notation). Es gibt einen neuen RealTracks-Künstler-Browser, um Infos/Bios/Links/Listen von RealTracks zu allen Künstlern zu finden. Ein neuer Feature-Browser ermöglicht es dem neuen oder "vergesslichen" Benutzer, die meisten Features/Hotkeys/Dokumente von einem einzigen Fenster aus leicht zu finden und zu benutzen. Die Funktion Tempoausgleich ermöglicht es, einen aufgenommenen Rubato-Song in ein festes Tempo zu ändern. Verbesserte Audio-Zeit/Tonhöhen-Dehnung (Elastique) enthalten. Es gibt SongPicker-Verbesserungen, Auto-Intros für Bass/Drums oder nur Drums, 3.400 zusätzliche Titel, MusicXML-Verbesserungen, "Linkshänder"- und "Studentensicht"-Gitarre, Ziehen & Ablegen -Verbesserungen, Audio-Akkord-Wizard mit mehreren Fenstern und mehr!

KAUF/UPGRADE, & DOWNLOAD JETZT!

With Band-in-a-Box® Your Band is MASSIVE!

Open Band-in-a-Box®, and you're instantly gaining access to at least 300 different RealTracks played by real live musicians!

There's more than 140 Artists that contribute to the 2,900+ RealTracks available! Our RealTracks and RealDrums Artists are top studio musicians, and the RealTracks they play will add an amazing human element to your projects!

Now is a great time to have these musicians handy!

-----

Band-in-a-Box® Pro includes over 300 RealTracks in 100 bands! Windows | Mac
Band-in-a-Box® MegaPAK includes over 500 RealTracks in 300 bands! Windows | Mac
Band-in-a-Box® UltraPAK includes over 2,900 RealTracks! Windows | Mac
Band-in-a-Box® UltraPAK+ includes over 2,900 RealTracks! Windows | Mac
Band-in-a-Box® Audiophile Edition includes the uncomplessed files for over 2,900 RealTracks! Windows | Mac

Learn more about using RealTracks in your Band-in-a-Box® projects: Windows | Mac

Forum Stats
32839 Members
68 Forums
66120 Topics
561397 Posts

Max Online: 2537 @ 01/19/20 07:09 AM
Newest Members
EyalSavab, Christmas Music, Calceus, seoulsongpa, philcoe

32839 Registered Users
Top Posters (30 Days)
eddie1261 175
VideoTrack 150
Planobilly 134
MarioD 134
Janice & Bud 130
Pipeline 118
Al-David 116
Matt Finley 110
Jim Fogle 108
bobcflatpicker 93
Today's Birthdays
gfclef, Hans Hess, Henry Nurdin, Jerry Duguet