More then a time or two I have done a copy & paste after splitting and deleting a clip out of a track... with the aim of getting the exact part I want.
That works fine for me in many cases. I listen solo to be sure it works and sounds natural.
I go and find that cymbal crash or snare hit I want, in some other part of the song, copy it and put it where I want it... who hasn't done that?
Last edited by Guitarhacker; 06/22/1404:41 AM.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
What ideas do you want from me? You want me to reinvent the entire audio midi world? Afaik what you want cannot be done with audio files. Midi, yes. Audio, no.
I think I'm right since no one else has jumped in here to correct me.
What ideas do you want from me? You want me to reinvent the entire audio midi world? Afaik what you want cannot be done with audio files. Midi, yes. Audio, no.
I think I'm right since no one else has jumped in here to correct me.
Bob
I tried to say the same thing a few messages ago. If you want to control drums MIDI with a good sound source is the way to go IMHO.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
At the end of the day you are pretty limited to what you can do with Stereo RealDrums, there should be option to generate intros, different endings and fills etc.. there is no button to "Cut Loose" and generate a great drum solo and not be restricted as if playing in a church. I think soon you will see Super RealDrums that will be Multichannel, do all of this and have a lot more variation to choose from. They will still of course have Stereo RealDrums for those who don't need or want to venture any further, just as you still have a choice of Midi Drums over RealDrums.
With just this you are limited, don't get me wrong they are great but not the end of the story.
If they had multichannel flac ogg wma that would be great because those how just want stereo drums can leave them as they are and those who want more control can split them to multitrack as you can do in Audacity Cubase Reaper etc..
Can you see what this is asking ?
More variation, that's it.
Did not mention MIDI except you have a choice to right click generate midi drums, that RB can do.
You are going on about Midi and Audio, if anything has to do with midi it is not "RealDrums"
Don't get me wrong I love RealDrums and use them but it is not a Real Drummer that sat down to record with you to the feel of your song, it goes back and forth using DATA as above. See pattern,Count-in,0,5,0,2,-1 it is 2 bars why not have an intro option that will choose other intro samples data to generate prerecorded intros, fills, solos, 4bar endings and so on. Would not that be an improvement.
I can use MIDI DATA with velocity etc.. recorded from a human to trigger "samples" recorded in a studio also using EZdrummer2 that is fine @ $150 works great except it is midi type 0 and gives RB grief so I have to use Sweet Midi converter to convert the drag n drop midi files to type 1.
"do you mind if we put a mic on each drum so we have more control over the mix"
When you are use to mixing multi track drums it is claustrophobic and frustrating trying to do things with the stereo mixdown.
That's it is that too much to ask ?
"They will still of course have Stereo RealDrums for those who don't need or want to venture any further, just as you still have a choice of Midi Drums over RealDrums."
Originally Posted By: jazzmammal
This sounds great but consider this, file size, file size and file size. How many tracks are we talking here? 6? 8? 10? That means you're tripling or what octupling the file size?..
Bob
8 channel wma
Format : Windows Media File size : 1.65 MiB Duration : 1mn 25s Overall bit rate mode : Constant Overall bit rate : 161 Kbps Maximum Overall bit rate : 161 Kbps Encoded date : UTC 2014-01-02 22:37:20.607
Audio ID : 1 Format : WMA Format profile : Pro Codec ID : 162 Codec ID/Info : Windows Media Audio Description of the codec : Windows Media Audio 10 Professional - 160 kbps, 48 kHz, 7.1 channel 16 bit 1-pass CBR Duration : 1mn 25s Bit rate mode : Constant Bit rate : 160 Kbps Channel(s) : 8 channels Sampling rate : 48.0 KHz Bit depth : 16 bits Stream size : 1.63 MiB (99%) Language : English 2 channel stereo wma
Format : Windows Media File size : 1.65 MiB Duration : 1mn 25s Overall bit rate mode : Constant Overall bit rate : 161 Kbps Maximum Overall bit rate : 161 Kbps Genre : Blues Encoded date : UTC 2014-06-23 05:20:18.798
Audio ID : 1 Format : WMA Format profile : Pro Codec ID : 162 Codec ID/Info : Windows Media Audio Description of the codec : Windows Media Audio 10 Professional - 160 kbps, 48 kHz, 2 channel 16 bit 1-pass CBR Duration : 1mn 25s Bit rate mode : Constant Bit rate : 160 Kbps Channel(s) : 2 channels Sampling rate : 48.0 KHz Bit depth : 16 bits Stream size : 1.63 MiB (99%) Language : English
I can see now why Biab stays stuck in the past, a user comes up with a good idea only to be loaded on and put off from coming back. It's a collective culture to keep Biab in a time warp. Lol Multi channel drums ! they are common place over in the Reaper forum, there are tutorials on recording and saving to a multi channel formats compressed and uncompressed.
You said it all though not many had ears All those years ago.....
Cause I was involved more than 10 years ago.... We tested RD it was the first move out of midi But even with just stereo we all joked about getting stock in hard drives. Storage indead was the issue. Luckily storage ability increased before Real Tracks came out.
I can see now why Biab stays stuck in the past, a user comes up with a good idea only to be loaded on and put off from coming back. It's a collective culture to keep Biab in a time warp. Lol Multi channel drums ! they are common place over in the Reaper forum, there are tutorials on recording and saving to a multi channel formats compressed and uncompressed.
Wow, are you also missing the point from 2014 or am I having a total brain freeze here?
A PG Music Real Drum track is a recording of a real drummer playing full phrases on an acoustic drum kit in real time. Real Drums are not single hit samples controlled by a sequencer.
Lets make this simple with a picture. Pretend a guy is sitting in your living room playing a song on an acoustic kit and you're recording him. Explain to me how you get discreet individual drum kit tracks from that. Or, are you talking about putting midi triggers on individual parts of the kit or something and that's how you're creating these multitracks talked about on the Reaper forum?
A PG Music Real Drum track is a recording of a real drummer playing full phrases on an acoustic drum kit in real time. The Real Drums are recorded as seen in the pic of the actual recording session below, the microphones run to separate channels on a mixer that records each mic, PG then adjust the levels on each mic and mix it down to stereo as in the early days hard drive space was an issue but not these days with cheap T's of hard drive space available and many compressed and non compressed multichannel formats.
PG record a guy sitting in the studio playing a song on an acoustic kit. PG then mix these from the original stems, gating, compressing etc.. down to a stereo track.
If you need to learn about mixing drums here's some videos and some recorded multi stems to download, these were the first videos in the search, but there's more if you need them:
When they recorded the REAL HUMAN drummer in the studio for the Real Drums it was multi miced BUT mixed to stereo. *.ogg files suck big time
If you know a Human Drummer you can use the REAL TRACKS generator and mic your own kit with compressors and gates etc. and make your own. That's what I did for some.
You clearly don't totally understand Real Band after reading the rest of the posts.
Last time I check RB wouldn't split a RealDrum or UserTrack drum that is multichannel wav , and it wouldn't open ogg or mogg. If it could split the wav in the engine like it does when you drag or open a multichannel wav in RB that would be a start, and the above for BB.
We're getting off track here, my comments are still based on what was discussed in this thread originally.
I completely understand how to record and mix drums, I probably have 12-15 projects I did remotely using my Akai DPS 16 HD recorder plus a separate 12 channel mixer since the Akai only allows simultaneous recording of 8 tracks at once. I don't have an elaborate kit bag of 15 drum mics, I use 3-5 usually.
Listen to what the guy says at the 1:45 mark of your first example vid. He says "the most important thing to remember whether you have a couple of tracks or a whole lot of tracks, they are a single instrument". So take the individual track of the overhead mics for example. Are you going to be able to take that recording and plug it into another song using a different drum kit? Maybe but probably not because the rhythms the first drummer was playing will be bleeding through on the overhead mics and will be heard in the second kits recording where the drummer is playing different stuff. Therefore it's unlikely you will be able to change the elements of the original kit, you have more control over the mix but other than that, you're done.
The original point of contention at the beginning of this thread is he wanted to be able to change the performance aspects of the drums, add fills, change intros, swap out one drum for another etc. Having multichannel stems of a "single instrument" is not going to help with that. If you want to add, subtract or otherwise change that basic performance then you're talking about midi drum samplers and then you can write anything you want.
He's also requesting that somehow Biab or RB be able to generate a multiple track RD performance. They can't. They only can generate one RD track at a time. If that's a wishlist request, that's a heckuva request.
RB was originally Power Tracks and had nothing to do with Biab, it was it's own discrete program. PGM was somehow able to graft some Biab functions into PT and they called it Real Band. Biab only has one drum track, I certainly do not know anything about it's internal programming code but I do know as far as drums are concerned it takes the files that comprise one RD style, which is a recording of a full drum kit and chops them up according to what the user put on the chord grid. My point 4 years ago about file sizes and numbers of files was based on that.
This is the exact same concept when folks request more variations, more solo licks in the Real Tracks. Those things are great but they will greatly increase the file sizes which will in turn increase the generation times. I don't have to tell you most Biab users do not have the latest and greatest computer systems.
We hear complaints about how long it takes to generate songs including the drums. I just checked some RB filesizes in Explorer and the sizes are roughly between 3 and 12 MB. If they were somehow able to take say, 8 separate drum tracks requiring 8 different groups of files for each style so you're multiplying those average file sizes by 8 and mix and mash all that together to create a multichannel RD performance that consists of 8 separate tracks? How on earth could that possibly work with what we know about Biab now? And even if that were possible how long would it take to generate? 5 minutes just for the drum part? That's why I kept harping on audio vs midi. Generating midi is almost instant while generating audio tracks takes time.
You are totally missing the point of the user. It says more variations and nothing about using hits out of the multi tracks to create up new patterns (though that user did upload multichannel with individual hits at the end for a reason). It even has a picture of what is meant "intros, different endings and fills drum solos " that's what the Real Drums need more variations, if a 2 bar drum ending is enough for you that's fine. Why the heck have 12 key RealTracks ?
"We hear complaints about how long it takes to generate songs including the drums." crap ! there are more complaints about adjusting levels of drums !!! 5mins for drums ? you're talking from where the sun don't shine, I would respect what you say if you knew what you were talking about. Have you even tried any of this ??? What's that about condemnation and thorough investigations ????? That is what you call death at it's best, it's only when you have died you find out that life is death and death is life.
"He's also requesting that somehow Biab or RB be able to generate a multiple track RD performance. They can't. They only can generate one RD track at a time. If that's a wishlist request, that's a heckuva request.
Far Canal ! they are in a multichannel wav or compressed format they are not 8 separate tracks that it has to do.
The user even created real drums with intros fills 4 bars ending in the user forum ! lol
Originally Posted By: jazzmammal I've said this so many times now. If these updates were a serious problem affecting millions of users Microsoft's stock would tank badly. It ain't happening guys there is no problem with these updates unless you've completely messed with your system on your own.
This totally puts me off wanting to help, honestly, why did I go to so much trouble getting the VST sync fixed ??? why bother if you get someone knocking ides ! I can see the reason BB/RB is stuck in the past from a million miles away, heck, blind Harry could see it.
Give me one good reason why I should bother, please ! what am I doing here ?? Really.
At the end of the day you are pretty limited to what you can do with Stereo RealDrums, there should be option to generate intros, different endings and fills etc.. there is no button to "Cut Loose" and generate a great drum solo and not be restricted as if playing in a church. I think soon you will see Super RealDrums that will be Multichannel, do all of this and have a lot more variation to choose from.
Man, I certainly hope this is coming.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
This is a lot more elegant then splicing tape. All the single drum parts are at the end of the RD file. Open the RD wma files and cut,copy,paste to your hearts content and make new RDs. At some point PG should multi track the drums.
A lot of the new MIDI drums were done at the same time the RDs were being recorded by using a midi controller so are completely editable and sound real.
In a nutshell, included in each mixes and stems pack are the relevant mix and stems files for the Drum Kit. The mix files are full mixes of the drum kit, once it has been through the mixing process, using such processing as EQ and compression. The stem files are sub mixes of the kit that will have the same sound as the full mix files. Where the full mix files will be mixes of the whole kit, the stems files will break the kit down a little into say a file for the kick drum, another file for the snare drum, another file for the rest of the kit and then finally yet another file for the room mics. These individual stem files of the kit can then be played back together, giving the same sound as the full mix files, but also giving you a bit more control over the separate elements of the kit. This is a great option for anybody who wants an immediate sounding kit, but still wants the flexibility to change the sounds or levels of the kit themselves. These are then be saved in a multichannel format, so one file with all the separate tracks in. For those that just want stereo drums they will choose Stereo instead of Multichannel in the Drum Picker.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.