Got curious, and just tested VST 1.8.14: It still behaves the same on my system, with Cubase 10. Any MGU wont generate, SGU does generate, but even slower than the 1.7 version, almost a still-stand, thus no sound, and the GUI disappears to the background when you press play ... F
I can only get the VSTfx in Cubase Elements 9. By default the Plugin installer don't install the FX plugin (this is lame) you need to copy it from bb\BBPlugin\Files
The Instrument version VSTi loads into an Instrument track, the FX version VST loads in an Audio track. Some DAWs only have Audio tracks like Adobe Audition and Audacity.
Band-in-a-Box DAW VST Plugin.dll Band-in-a-Box DAW VST FX Plugin.dll
Band-in-a-Box DAW VST3 Plugin.vst3 Band-in-a-Box DAW VST3 FX Plugin.vst3
Band-in-a-Box DAW VST Plugin32.dll (to be released) Band-in-a-Box DAW VST FX Plugin32.dll (to be released)
You should use the VST3 with Cubase, you don't need to worry about the other plugin types. Let us know if you're still having trouble with Cubase after installing the 1.9.19 update (in build 611).
Well, something quirky is going on ... just installed v 611, and checked matters. Seems some oldies linger around as i found them twice already & different here:
just did ... i'll check them later, funny the file date of the 'new' ones is still 31 december; makes things sort of unclear, before the FX version seemed to be older: 21 december. Thnx
I would of had the pre-release 1.9.19 when I tried it in Cubase LE 9 in the post above, so it should work now for you with one or both of the plugins VSTi/VSTfx, just try it in an instrument and an audio track.
Just tested the standalone version ... loading a full blown complex MGU in 1.9.19 still takes forever, and hangs at 90% ... i waited about 4 minutes, then gave up.
Loading it as VST in an instrument track in Cubase: it's the same story .... besides pressing generate causes the plugin to disappear {repeatedly after addressing it again) to the back ground, just as the older version did ......
Originally Posted By: PeterGannon
In our tests the vst3 works fine with Cubase.
Peter, a Q: which Cubase version? Pro 10 i use, and there has been significant changes in the way it handles graphics. Some older plugins don't work anymore, like AVOX and Antares Autotune v 8.1 (crashes Cubase 10) i was told. Both work fine in v 9,5 and before. F
Version 10. Can you check if your bbw4.exe has the "run as admin" setting checked? It should NOT be (if it is, this could be causing your problems if you're running your DAW normally). To check, right-click on the .exe | Properties | compatibility.
It was not, i set it on, and loaded the VST fresh. It took a while for the same file to even start loading, plugin disappearing to the background again. Loading was very slow as before, and gets stuck again at about 90%. No further loading. And surprise: it crashed Cubase 10.0.10 Pro. Cubase 10 did not crash earlier on me !! It all turned loose again, after a waiting period of a few minutes .... and the VST wanted to be generated once again ... then stuck at 90%. I give up LoL. So on or off doesn't make a difference ... Press play on ant track gives the error below ...
PS There were WAV files in the SavedTracks folder, the last one present wouldn't play with Windows Media Player, earliers ones sounded OK (at the end too)
A Q: why is it so difficult to incorporate just an MTC or MidiClock slaving option for BIAB, or better: get a rewire function built in even ????
No, I was confirming that you had it 'OFF', I thought that 'on' could be a cause of the problem.
Quote:
besides pressing generate causes the plugin to disappear
You can click anywhere on screen to bring it back. Cubase really likes to be in front, and that happens in our testing as well, and we are working on that. This is unrelated to the main problem you are having.
Quote:
loading a full blown complex MGU in 1.9.19 still takes forever,
We need to simplify this problem:
1. Load the standalone version. 2. Select any RealStyle (Select button to open StylePicker, click on a style and press OK). 3. Press Generate. Does this work for you?
Done, running as admin, addresses the RT folder all right, selecting a RT, the generate bar works for 2 secs, and then stops. But the track plays.
Loading a MGU midi only works, slow generating, and it works ..
Loading a full blown RT loaded MGU file works but stucks at 90% again, for a long while. The track has not been generated yet message appears when pressing play. (Pressing DEMO produces sound).
The yellow popups indicate somethings generating still, over 5 minutes at least. And after about 8 minutes it works suddenly .... But all it takes tooooooooo long.
PS i am going off-line in a minute or so ... getting late.
Step 1. Open the stand-alone plugin version. To do this, open your Band-in-a-Box folder (bb) and go to BBPlugin\Files. Double-click on "Band-in-a-Box DAW Plugin Stand-alone.exe".
Step 2. Click File | New to make sure you have a new session. Then choose a style. To do this click on the Style button and click on Select Style. After a few seconds the StylePicker opens. Click on the style _12STACM. Press OK.
Step 3. Press the Generate button and wait. It should take about one minute. When it's finished, you should see a yellow message box that has the words "render complete" on it, and the progress bar will stop moving and reset back to the left.
At this point you have generated a "song" which is just a C chord played by the style _12STACM, consisting of five RealTracks instrument tracks. When you press the Play button at the top of the stand-alone plugin window, you should hear it play. ...
Question 1: Do you hear it play?
Look in the BBplugin/SavedTracks folder, look for a subfolder that has the latest timestamp. It should be dated when you generated the track. It should have a name that looks something like this: 2019-1-7, 16-56-58. Open this folder. You should see 10 files - some wave, some MIDI files.
Question 2: Do you see these files?
In the Band-in-a-Box plugin, the tracks should have a little green waveform icon in the green boxes to the left of them, and four of them also have a little yellow "note" icon to the right. The waveform indicates audio data is available for that tack, and the note tells you there is MIDI data available (RealCharts).
The song i was working with before has a 4/4 sig, but about three 2/4 bars, and a few holds. Can that be maybe a reason why it takes 10 minutes almost to render?
I loaded it fresh after the test, used 'reset to default state' first .....
When i waited it all out rendering, there was a new numbered folder in SavedTracks, and in the root of it two files, 5.mid and 6.mid
See picture: After 10 minutes: only one track showed as rendered, and the VST played it OK, but the rest did not show. The files seemed present in the appropriate folder however. The marked file was one chaotic musical mess with the tracks in a mix completely out of sync. regs, F
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean