Got curious, and just tested VST 1.8.14: It still behaves the same on my system, with Cubase 10. Any MGU wont generate, SGU does generate, but even slower than the 1.7 version, almost a still-stand, thus no sound, and the GUI disappears to the background when you press play ... F
I can only get the VSTfx in Cubase Elements 9. By default the Plugin installer don't install the FX plugin (this is lame) you need to copy it from bb\BBPlugin\Files
The Instrument version VSTi loads into an Instrument track, the FX version VST loads in an Audio track. Some DAWs only have Audio tracks like Adobe Audition and Audacity.
Band-in-a-Box DAW VST Plugin.dll Band-in-a-Box DAW VST FX Plugin.dll
Band-in-a-Box DAW VST3 Plugin.vst3 Band-in-a-Box DAW VST3 FX Plugin.vst3
Band-in-a-Box DAW VST Plugin32.dll (to be released) Band-in-a-Box DAW VST FX Plugin32.dll (to be released)
You should use the VST3 with Cubase, you don't need to worry about the other plugin types. Let us know if you're still having trouble with Cubase after installing the 1.9.19 update (in build 611).
Well, something quirky is going on ... just installed v 611, and checked matters. Seems some oldies linger around as i found them twice already & different here:
just did ... i'll check them later, funny the file date of the 'new' ones is still 31 december; makes things sort of unclear, before the FX version seemed to be older: 21 december. Thnx
I would of had the pre-release 1.9.19 when I tried it in Cubase LE 9 in the post above, so it should work now for you with one or both of the plugins VSTi/VSTfx, just try it in an instrument and an audio track.
Just tested the standalone version ... loading a full blown complex MGU in 1.9.19 still takes forever, and hangs at 90% ... i waited about 4 minutes, then gave up.
Loading it as VST in an instrument track in Cubase: it's the same story .... besides pressing generate causes the plugin to disappear {repeatedly after addressing it again) to the back ground, just as the older version did ......
Originally Posted By: PeterGannon
In our tests the vst3 works fine with Cubase.
Peter, a Q: which Cubase version? Pro 10 i use, and there has been significant changes in the way it handles graphics. Some older plugins don't work anymore, like AVOX and Antares Autotune v 8.1 (crashes Cubase 10) i was told. Both work fine in v 9,5 and before. F
Version 10. Can you check if your bbw4.exe has the "run as admin" setting checked? It should NOT be (if it is, this could be causing your problems if you're running your DAW normally). To check, right-click on the .exe | Properties | compatibility.
It was not, i set it on, and loaded the VST fresh. It took a while for the same file to even start loading, plugin disappearing to the background again. Loading was very slow as before, and gets stuck again at about 90%. No further loading. And surprise: it crashed Cubase 10.0.10 Pro. Cubase 10 did not crash earlier on me !! It all turned loose again, after a waiting period of a few minutes .... and the VST wanted to be generated once again ... then stuck at 90%. I give up LoL. So on or off doesn't make a difference ... Press play on ant track gives the error below ...
PS There were WAV files in the SavedTracks folder, the last one present wouldn't play with Windows Media Player, earliers ones sounded OK (at the end too)
A Q: why is it so difficult to incorporate just an MTC or MidiClock slaving option for BIAB, or better: get a rewire function built in even ????
No, I was confirming that you had it 'OFF', I thought that 'on' could be a cause of the problem.
Quote:
besides pressing generate causes the plugin to disappear
You can click anywhere on screen to bring it back. Cubase really likes to be in front, and that happens in our testing as well, and we are working on that. This is unrelated to the main problem you are having.
Quote:
loading a full blown complex MGU in 1.9.19 still takes forever,
We need to simplify this problem:
1. Load the standalone version. 2. Select any RealStyle (Select button to open StylePicker, click on a style and press OK). 3. Press Generate. Does this work for you?
Done, running as admin, addresses the RT folder all right, selecting a RT, the generate bar works for 2 secs, and then stops. But the track plays.
Loading a MGU midi only works, slow generating, and it works ..
Loading a full blown RT loaded MGU file works but stucks at 90% again, for a long while. The track has not been generated yet message appears when pressing play. (Pressing DEMO produces sound).
The yellow popups indicate somethings generating still, over 5 minutes at least. And after about 8 minutes it works suddenly .... But all it takes tooooooooo long.
PS i am going off-line in a minute or so ... getting late.
Step 1. Open the stand-alone plugin version. To do this, open your Band-in-a-Box folder (bb) and go to BBPlugin\Files. Double-click on "Band-in-a-Box DAW Plugin Stand-alone.exe".
Step 2. Click File | New to make sure you have a new session. Then choose a style. To do this click on the Style button and click on Select Style. After a few seconds the StylePicker opens. Click on the style _12STACM. Press OK.
Step 3. Press the Generate button and wait. It should take about one minute. When it's finished, you should see a yellow message box that has the words "render complete" on it, and the progress bar will stop moving and reset back to the left.
At this point you have generated a "song" which is just a C chord played by the style _12STACM, consisting of five RealTracks instrument tracks. When you press the Play button at the top of the stand-alone plugin window, you should hear it play. ...
Question 1: Do you hear it play?
Look in the BBplugin/SavedTracks folder, look for a subfolder that has the latest timestamp. It should be dated when you generated the track. It should have a name that looks something like this: 2019-1-7, 16-56-58. Open this folder. You should see 10 files - some wave, some MIDI files.
Question 2: Do you see these files?
In the Band-in-a-Box plugin, the tracks should have a little green waveform icon in the green boxes to the left of them, and four of them also have a little yellow "note" icon to the right. The waveform indicates audio data is available for that tack, and the note tells you there is MIDI data available (RealCharts).
The song i was working with before has a 4/4 sig, but about three 2/4 bars, and a few holds. Can that be maybe a reason why it takes 10 minutes almost to render?
I loaded it fresh after the test, used 'reset to default state' first .....
When i waited it all out rendering, there was a new numbered folder in SavedTracks, and in the root of it two files, 5.mid and 6.mid
See picture: After 10 minutes: only one track showed as rendered, and the VST played it OK, but the rest did not show. The files seemed present in the appropriate folder however. The marked file was one chaotic musical mess with the tracks in a mix completely out of sync. regs, F
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.