Page 2 of 5 < 1 2 3 4 5 >
You need to be logged in to post
Options
Index
#532464 - 04/11/19 10:58 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 05/13/03
Posts: 8014
Loc: Rio Grande Valley, Texas
silvertones Offline
Veteran

Registered: 05/13/03
Posts: 8014
Loc: Rio Grande Valley, Texas
Yes it should be working for you. I looked back in the RB Update history all the way back to 2009 and nothing mentioned abouted fixing nodes issues except minor typo stuff, nor do I remember anything during Beta testing as far as I remember.
_________________________
John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php

Top
#532474 - 04/11/19 12:09 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: silvertones]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Maybe there is something deeper in the idea that it has something to do with Midi.

Just curious. Did you try my actual test which takes the volume to zero with comments in the recording saying the volume is zero at that time making the playback in wav such that you should not hear these comments. On the contrary small adjustments that are typical with a recording are easy to miss if you are not looking for them. This is why I did probably 12+15+9 = 36 recordings and never noticed it until I made a fairly larger adjustment. Actually the real reason I noticed it to be honest was because I was fixing my terrible guitar playing at the jam because I had no warm-up and I also changed my technique and I am listening unusually carefully to it. In short I have become an extreme fuss buss as of late regarding these recordings. I had made maybe a -9 drop in one node and a +3 rise in another node and the difference was just barely enough for me to notice it and dig farther. If all one is doing is +3 and -3 and one is not unusually sensitive one won't notice it. You really do have to take the node to absolute zero to make the test easy. Why make it hard so you have to strain to listen to it and spend a lot of time on it? Makes no sense. My test takes maybe 5 minutes and it is a no Brianer to know it is not working (as it should be).

Not only that support told me they can do remote fixing if it is a serious. If they did this test they could run my test and be 100% sure it is happening (actually I could send the .seq and mp3 files through regular email so they would know 100% for sure it is happening by recognizing my voice on both recordings). Again 5 minutes to do this test and I already have the .seq file to save that work so my estimate is probably about right. Why not? It should not be happening. Why is it happening? Valuable info for them I would think.

Lastly once I decided to look for a different product I will install it on my 3rd machine to see if I get the same result. This assumes that I do not loose a BIAB activation since I am happy with BIAB. Three machines with the same bad result? That is highly unlikely to happen right? Speaking of BIAB as an aside I have had BIAB song file downloads for "Jazz Jam Club" members for a while but I just introduced BIAB chord window images as a way for them to get the chords from any of the 7 Hal Leaonard song books I have if I put a song out on the Jam Schedule that is not in a more common song book. There are a few reasons to use the BIAB chord window image for this but one is to encourage them to buy BIAB (the hope being if they see all the buttons they might get interested).

Looking for a different product with my list of 15 items should not take to long. Make up a list of 15 requirements, send a boat load of emails out to forums and sales people. Assign a weekend to each positive response (sorted best to worst of course). I should have my answer for each product by the end of the weekend. If need be I will do it in the summer when the jamming dies off.

Back to tax. Got to get it done tonight :-)


Edited by bowlesj (04/11/19 01:43 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532498 - 04/11/19 06:19 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 08/20/11
Posts: 5967
Loc: Winston-Salem, NC USA
Jim Fogle Offline
Veteran

Registered: 08/20/11
Posts: 5967
Loc: Winston-Salem, NC USA
John,

It doesn't read like you're using many DAW like features so you may be able to get by with a computer based recording program like +++ Audacity +++. Audacity works with audio only, there is no MIDI involved. So it's essentially a computer based digital audio recorder. The program can record as many tracks at one time as your audio interface and drivers allow. Best of all, the program is FREE!
_________________________
Jim Fogle - 2020 BiaB (721) RB (Build 3) Ultra+ PAK
Cakewalk - Zoom MRS-8 recorder
Desktop: i7 Win 10 build 1909, 12GB ram 256GB SSD, 4 TB HDD
Laptop: i3 64bit Win 10 build 1803, 8GB ram 500GB HDD
Music at: http://fogle622.wix.com/fogle622-audio-home

Top
#532501 - 04/11/19 07:02 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: Jim Fogle]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Hi Jim,

I have an old version of audacity. I don't really know my version very well so maybe the latest version could match RealBand. Without your input I would no have considered it but thanks for the idea. IF I do send out my requirements I will include them.

I just got an idea. I could send my RealBand sequential file out to my club members and ask them to read it in and use the save as to create the wav file and find out the result and their system specs and real band version etc. Maybe I can find one that gets my problem with win-7 service pack 1 and another with win-7 service pack? that does not. If that is the solution I will have enough reason to put up with a weekend without that computer while it slowly gets the service pack installed. IF someone has win-7 with service pack #1 and it works on their machine then at least I know that is not the cause.

Maybe Micrsoft will provide a download the the service pack only when they stop supporting Win7. I could download it to My old WinXP machine which I only use for backups, transfer it over and install it in maybe 20 minutes. If that was possible I would do that in a finger snap.

One member uses Ableton live. I am betting it could match the Realband node function. Garage band maybe. My impression is there are tons of them that put RealBand to shame but for my limited needs if RealBand can do these node volume adjustments I just don't need that kind of horse power.

It just seems very weird that it does not work and I have to send the output to another computer as a work around to get the node function.


Edited by bowlesj (04/11/19 07:06 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532525 - 04/12/19 04:14 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
jford Online   content
Veteran

Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
John, there is only a service pack 1 for Windows 7, so you can't go higher. That being said, Windows 7 goes end-of-life in January 2020, after which there will be no more security patches (feature patches ended a while back). I'm in the same boat, as I run Windows 7 on my laptop (didn't go to Windows 10 on it because HP didn't provide proper drivers for either Windows 8 or 10). I can run 10 (and probably will come January), but only get a generic video driver and HDMI doesn't work for when I try to connect my laptop to a TV, nor does the fingerprint reader. But I digress.

Just be aware that come January you may have security concerns with your computer(s).
_________________________
John

LaptopBeast HP Win10Pro64 8GB
AudioBeast ASUS Win10Pro64 16GB
VideoBeast HP Win10Pro64 8GB

BB-RB2020/UMC404HD/Casio Kbds/Cakewalk/Reaper/Studio One/Samplitude/MixBus/Notion/Finale/Noteworthy/NIKomplete/Halion/Garritan/IK

http://www.sus4chord.com

Top
#532531 - 04/12/19 05:44 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: jford]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Hi John, thanks so much for responding. It must be fate :-) We have the same first name and you are the perfect person to do this test :-)

Maybe you can do me a giant favour and do the simple test for me that I made much clearer than the last time and which is attached to this post with a nice set of detailed step by step instructions. I had to copy the instructions out to a 2nd image so you can read them.

I assume you know how to run the nodes. Just in case others see this post who do not know how to use the nodes and who also want to try my exact test here is the video for how to use the nodes (probably better called "Volume Automation").

Youtube: RealBand Volume Automation
https://www.youtube.com/watch?v=Z5kKx5ThpSY&t=12s

As mentioned in an prior post my original testing method was far to slow and cumbersome. So I created a much better way and created a picture for how to do it which is shown below. This revised picture has the actual instructions.


Regarding the microphone part of the instructions if one does not have a microphone one could play 3 high notes, 3 low notes and the same 3 high notes (with a larger space between the sets of 3) as a way to make the audio wave form unique (so it is easy to figure out where to adjust the nodes down to zero volume) and (so it is easy listen to the .wav file and figure out where you are in the recording and if it has properly reflected the node adjustments).

Thanks,
John

P.S. If "volume automation" can not be saved to .wav with RealBand then this YouTube/Google search string is probably the best starting point for finding programs that can. String Search: "daw programs with volume automation" or "daw programs with volume automation review". If no program can do it then feeding the sound output to another computer would be the only way I can think of at least (I used it when I could not get RealBand to do it and it works but the volume is kind of low).


Attachments
RealBand_NodeSettingImage.png

RealBand_NodeSettingImage_Instructions.png




Edited by bowlesj (04/14/19 04:02 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532580 - 04/12/19 10:34 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
jford Online   content
Veteran

Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
If I have time this weekend, I'll give it a try on my Windows 7 laptop and let you know the results I get in RealBand 2019.
_________________________
John

LaptopBeast HP Win10Pro64 8GB
AudioBeast ASUS Win10Pro64 16GB
VideoBeast HP Win10Pro64 8GB

BB-RB2020/UMC404HD/Casio Kbds/Cakewalk/Reaper/Studio One/Samplitude/MixBus/Notion/Finale/Noteworthy/NIKomplete/Halion/Garritan/IK

http://www.sus4chord.com

Top
#532581 - 04/12/19 10:55 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: jford]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Thanks John. IF you can't do it this weekend that is fine. No rush. I won't be doing any mixing again until after April 28th anyway. John
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532641 - 04/13/19 09:21 AM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
jford Online   content
Veteran

Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
John B. - I should be able to test this in RB2019 this weekend. However, there are a couple of things I noticed. In the picture you posted, it was just audio tracks, so your MIDI settings (that you later posted) should not apply. Also, I noticed that you are using stereo tracks for what appear to be mono material (the wave form is all in the left channel of those audio tracks. Is there a particular reason for this?
_________________________
John

LaptopBeast HP Win10Pro64 8GB
AudioBeast ASUS Win10Pro64 16GB
VideoBeast HP Win10Pro64 8GB

BB-RB2020/UMC404HD/Casio Kbds/Cakewalk/Reaper/Studio One/Samplitude/MixBus/Notion/Finale/Noteworthy/NIKomplete/Halion/Garritan/IK

http://www.sus4chord.com

Top
#532662 - 04/13/19 12:05 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: jford]
Registered: 05/30/00
Posts: 19816
Loc: Marysville, Mi. USA
rharv Offline
Veteran

Registered: 05/30/00
Posts: 19816
Loc: Marysville, Mi. USA
jford,
I asked OP to post his MIDI settings because Nodes are stored as MIDI Events (to my knowledge).
If his MIDI was not sending correctly, these messages wouldn't happen. Just checking for an odd setting that could somehow be causing the OPs issue, since it seems so weird.


Attachments
Node_MIDI.jpg


_________________________
Make your sound your own!

Top
#532671 - 04/13/19 02:02 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: jford]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Originally Posted By: jford
John B. - I should be able to test this in RB2019 this weekend. However, there are a couple of things I noticed. In the picture you posted, it was just audio tracks, so your MIDI settings (that you later posted) should not apply. Also, I noticed that you are using stereo tracks for what appear to be mono material (the wave form is all in the left channel of those audio tracks. Is there a particular reason for this?


Maybe the reason for "the wave form is all in the left channel of those audio tracks" is I was not aware of this and it sounds pretty good to me ear. To bring the .wav files in to RealBand I go to the windows folder where the song tracks are stored, delete the ones I know have no recording data, highlight all the remaining .wav track files , left click and hold on the top track that is highlighted, drag it to the top track of RealBand and release the left button. That drops them all perfectly into RealBand keeping the same name as in the windows folder. So these tracks coming in would be mono and RealBand is doing whatever. If it sounds good to me I don't question it. It is basically the same with the "save As" after the Volume Automation (node) changes. If it sounds good to me (or if it is not important that it be perfect) I am done. It is more or less the same reason I never really checked all the prior recordings before and never noticed the problem before. It is only because I am in the middle of changing my guitar technique (mastering a new technique) that I have become really sensitive to it and listening really closely to it. Translation, my guitar playing live without a good warm-up is below my standard so I redo my guitar playing part of the recordings after a good solid warm-up and listen very carefully to them now. It is in this hyper critical mode I am much more likely to notice issues like the node adjustments not getting written out to the .wav file. In a way I suppose you could call this "just in time learning". My test is a different attitude. Since I am asking others to donate their free time my test is designed to make it easy "meaning you do not need to be hyper critical and listening really hard to notice the issue".


Edited by bowlesj (04/13/19 02:14 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532682 - 04/13/19 04:45 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 09/03/08
Posts: 126
Loc: ND
Del Offline
Apprentice

Registered: 09/03/08
Posts: 126
Loc: ND
John,
I have seen this problem before when I was first trying to use the 'nodes' to adjust levels with RB2017 ver7.

I used the Gain Nodes in db as you are doing and had all kinds of trouble with it not saving the set level. I contacted tech support in October of 2017 and they verified the problem. At that time they instructed me to use Volume nodes instead of Gain nodes. And that fixed the problem for me.

I'm now running RB2018 and the Volume nodes work perfect with RB2018 and Windows 7. It may be worth a try to use the Volume Nodes instead of Gain Nodes. The volume node levels range from 0 to 127 max.
_________________________
Del

Top
#532684 - 04/13/19 05:09 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: Del]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Hi Del,

thanks so much and wow! Maybe this problem is not so weird after all :-) Your input is very valuable because that eliminates my concern that it might be my using Win-7 without updates causing the problem. I have to assume TechSupport does not remember your problems. I was not aware there such a thing as volume nodes versus gain nodes. I will pock around and see if I can figure it out. Before I get into the google searches etc I am starting to remember some of the things Rharv mentioned 1 or 2 years ago when I first felt the need to have RB store volume changes. I seem to remember it has the ability to remember adjustments I make to the volume sliders. Maybe that is what you are referring to. If so it would not be as nice since one can not see it.

Also since John Ford is going to be doing my tests on version 2019 it sounds like he will get a positive result (the node adjustments will copy to the .wav file). It will be interesting to see what his results are.

So I have a day off with my daughter visiting. While she does some work I have been pocking around with Audacity to see if it can do a visual volume automation. It appears it may be able to. I am about to try and confirm that. If it can solve the problem what I will do is look at the new BIAB features and see if they are enticing enough to make me upgrade.

John


Edited by bowlesj (04/13/19 05:28 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532685 - 04/13/19 05:15 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 09/03/08
Posts: 126
Loc: ND
Del Offline
Apprentice

Registered: 09/03/08
Posts: 126
Loc: ND
John,
when you expand the track to set your node level, you will see a drop down box on the left side of the track. Click that and change it from 'Gain Nodes' to 'Volume Nodes'.
_________________________
Del

Top
#532687 - 04/13/19 05:34 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: Del]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Skip that. I just found it Del. You are a genious :-) I will attach a 2nd picture to help out with this and delete the first one. Now i will see if I can apply my simple little test and get a positive result :-)

Originally Posted By: Del
John,
when you expand the track to set your node level, you will see a drop down box on the left side of the track. Click that and change it from 'Gain Nodes' to 'Volume Nodes'.


Once I click the initial drop down to show the horizontal node line I do not see an additional drop down box to switch back and forth with. I attached the picture. I am on 2016 version 10 now. I don't remember it being any different in 2016 version 7 which I just upgraded from. Did they create a special variant for you?


Attachments
RealBand_Vol_Versus_Gain_Nodes.png




Edited by bowlesj (04/13/19 05:44 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532688 - 04/13/19 05:40 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 09/03/08
Posts: 126
Loc: ND
Del Offline
Apprentice

Registered: 09/03/08
Posts: 126
Loc: ND
Hover over track 2 as shown in your image, until your cursor changes to a double arrow and then drag track 2 downward, then you should see the other drop down box.
_________________________
Del

Top
#532689 - 04/13/19 05:58 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: Del]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
Thanks Del, I discovered it and updated my prior post but I guess not fast enough :-) I ran my simple test and the results were positive (see attached picture). Problem solved. Thanks so much for your help. Now the mystery is solved.


Attachments
RealBand_Test_Success_With_Volume_Nodes.png




Edited by bowlesj (04/13/19 08:18 PM)
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532692 - 04/13/19 06:12 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 09/03/08
Posts: 126
Loc: ND
Del Offline
Apprentice

Registered: 09/03/08
Posts: 126
Loc: ND
I'm glad it worked for you John!

I struggled with this problem for several months before tech support told me about the 'Volume Nodes' option.

Apparently the 'Gain Node' issue I reported in 2017 is still hanging around for some users. Using volume nodes has worked flawlessly for me and I use it in most of my songs.
_________________________
Del

Top
#532695 - 04/13/19 06:37 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: Del]
Registered: 07/01/12
Posts: 568
bowlesj Offline
Journeyman

Registered: 07/01/12
Posts: 568
I respect your patience Del. I would have jumped ship very quickly partly because part of me loves to learn new stuff. I was actually starting to investigate Audacity tonight. I would much rather stick with RealBand since BIAB is a wonderful program and we could not have as many jams without it. Bottom line is being a good jazz guitar player is much more important to me than being a great sound engineer. It always will be. Anything to save me time is the highest priority and you saved me a boat load of it tonight. Thanks again. Best of luck to you in everything. John
_________________________
John Bowles
My playing in my 20s:
https://www.reverbnation.com/johnbowles

Top
#532700 - 04/13/19 08:30 PM [RealBand] Re: RealBand 2016 save as volume issues [Re: bowlesj]
Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
jford Online   content
Veteran

Registered: 12/20/00
Posts: 11778
Loc: Pensacola, Florida
Okay, here are the results of my testing.

I created a RealBand file using a RealStyle to generate a number of tracks. I then picked one.

I started with Gain Nodes. After bringing various sections down to zero and then back up, I tried saving that individual track using the numerous ways you can do that in RealBand.

1. Right click on track, from popup menu select "Track, Save Track to File"
2. From the top line menu, select "Edit, Track, Save Track to File" (essentially the same as #1.
3. Right click on track, from popup menu select "Save Audio Track As WAV"
4. From top line menu, select "Render, Save Track to File"
5. From top line menu, select "Render, Save All Tracks to WAV Files"
6. Mute all the tracks except the track in question, the from the top line menu, select "Render, Merge Audio to Stereo WAV"

In all instances except #6 ("Merge Audio to Stereo WAV"), the resulting file does not honor the node settings. For #6, it does. Of course, even though my original track was a mono track, I ended up with a resultant stereo WAV file.

I then did the same thing using Volume nodes and obtained exactly the same results.

So, my guess is that the other methods to save a track (#1-#5 above) is to preserve the original underlying WAV file with no processing. #6, however, does honor the nodes so that the rendered down file contains the audio as you hear it normally in RealBand.

I don't know if this was intentional implementation, but it is clearly the way RealBand works.

Another test would be to see whether effects achieve the same results. So I tried it with heavy reverb (since that's easy to hear). I obtained the same results as with the nodes. I only heard reverb when I rendered using the "Merge Audio to Stereo WAV". All other means of saving the track resulted in the dry version of the track with no effects applied.

Hope that helps (at least answer the question).
_________________________
John

LaptopBeast HP Win10Pro64 8GB
AudioBeast ASUS Win10Pro64 16GB
VideoBeast HP Win10Pro64 8GB

BB-RB2020/UMC404HD/Casio Kbds/Cakewalk/Reaper/Studio One/Samplitude/MixBus/Notion/Finale/Noteworthy/NIKomplete/Halion/Garritan/IK

http://www.sus4chord.com

Top
Page 2 of 5 < 1 2 3 4 5 >


PG Music News
Band-in-a-Box® 2020 for Windows is Xtra Ready!

We never stop! The latest free patch update for Band-in-a-Box® 2020 for Windows readies the program for the just-launched Xtra Styles PAK 9 (on sale until June 30th - learn more here)!

Update to build 721 and you'll see that we've improved the step-advancing notes display, updated the key command criteria for looping bars from the chordsheet, fixed email client integration, and more.

If you are a Band-in-a-Box® 2020 for Windows user, you'll definitely want to update to the latest free patch update!

Learn more about Band-in-a-Box® 2020 build 721 for Windows and download it here.

#TBT Band-in-a-Box Finds!

I don't know about everyone here, but now that I've settled in to our "new normal" I've taken to rearranging and dusting off many things in order to keep busy and productive!

I'm picking up old hobbies, picking up clutter around the house, and as it turns out - finding forgotten picks!

We snagged these gems many, many, many years ago after The NAMM Show one winter. Check out the old Band-in-a-Box logo! Click here...

Have any of you come across something nostalgic like this these days? Let's see it!
(remember the first Audiophile version?!)

-Callie
Team Marketing

Review - Band-in-a-Box® 2020 for Mac … WOW!

"Dr. Dave" Walker (Dr. Dave On Music) recently received Band-in-a-Box® 2020 for Mac, and he absolutely loves it!

He's written his thoughts in detail, which can (and definitely should) be read here: Band-in-a-Box 2020 for Mac … WOW!

"Band-in-a-Box 2020 is a huge advance over even BB2019, with easier to use, more powerful features that give you more information while creating more musical results. You have never had more control of more features which are now much easier to find. The move forward with this version is astonishing. Again … WOW!

My very highest recommendation. Just upgrade! Or if for some strange reason you don’t have it yet, BUY THIS ONE! It will change your musical life!"
-"Dr. Dave" Walker

Thank you for the review, Dr. Dave!

Band-in-a-Box® 2020 Italian for Windows is Here!

Abbiamo lavorato duro e abbiamo aggiunto 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 202 RealTracks (il doppio dei 101 che abbiamo spesso pubblicato in passato), nuovi RealStyles, SuperTracks MIDI, Studi strumentali, trascrizioni RealDrums, stili Extra PAK 8 e altro!

ACQUISTA/AGGIORNA & SCARICA ADESSO

Interview: Eyes on Success featuring PG Music Inc., Band-in-a-Box® 2020, and the Updated JAWS Script

Take 30 minutes and make sure to listen to the latest episode from Eyes on Success, which focuses on the history of Band-in-a-Box® and using it with the screen reader JAWS, created by Peter Torpey. Hosts Nancy & Peter discuss our company history and Band-in-a-Box program with Tobin, our chief development officer, including how Band-in-a-Box is even more accessible with the help of their JAWS screen reader scripts!

Click here to download and listen to the podcast - you don't want to miss this one!

Eyes on Success is a weekly radio show / podcast geared to the visually impaired called "Eyes On Success" and that can be found at www.EyesOnSuccess.net.

Currently the scripts and associated documentation and resources can be found here.

You can watch Peter Torpey's video testimonial here.

#TipTuesday - Style Changes in Band-in-a-Box®

Head to our Tips & Tricks forum to read what other Band-in-a-Box users have discovered about the program!

Like mrgeeze's recent post Style Changes within a song.. another great BIAB feature.

...My arrangement's bass Real Track was 397 (bass Acoustic Paul).
Solid but not really what I wanted for a solo.

I hit the F5 key to bring up bar setting and poked around till i found the Real Tracks command button in the upper right.
Clicked on that & quickly change the bass to 452 (Soloist (bluesy).
12 bars later I did the same and switched it back to 397.

The results were excellent...

Did you know about this feature? Learn all about Bar Settings and how you can adjust them here.

PowerTracks Pro Audio 2020 Update Available!

If you are a PowerTracks Pro Audio 2020, be sure to download this small Update Patch released by our development team.

Enjoy the program!

Forum Stats
32138 Members
65 Forums
64281 Topics
545016 Posts

Max Online: 2537 @ 01/19/20 07:09 AM
Newest Members
CaptainChaulieu, Jhonnyrivasp, fredvig, markstyles, ppp

32137 Registered Users
Top Posters (30 Days)
MarioD 199
Pipeline 196
VideoTrack 173
Matt Finley 135
floyd jane 108
Rustyspoon# 100
Janice & Bud 96
Scott C 94
BlueAttitude 93
Jim Fogle 93
Today's Birthdays
alfstone, MusicStudent, Oren Fisher, Pete b