Since becoming a proud and grateful BiaB user in December 2018, I have hit the dreaded "255 bar limit" with several of my songs. And even though I've always been able to work around this limit, the amount of extra time I have to spend going through my workaround process has been very frustrating and disappointing. As a result, I've come to the conclusion that the "255 bar limit" is BiaB's biggest and most unfortunate handicap.
Recently, however, an idea occurred to me that could be a way to put an end to this limit and the need to work around it for songs that exceed it. So, I decided to share my idea here to see what all of you think about it and to find out whether or not it's feasible. But first I want to say that I'm not sure if this particular forum is the right place for me to post my idea. If it isn't, please let know which forum I should post it in so that I can obtain the proper feedback I'm seeking.
Before I share my idea with you, I need to mention how I use BiaB because of the role my process has played in the formation of my idea. Instead of manually entering the chords to my songs one at a time into the chord entry section of BiaB (as most of you probably do), I use BiaB to open a .XML file that I created with MuseScore, which is an open source music notation program. My .XML file contains the complete melody, lyrics, and chords to a song that I previously had entered into MuseScore. For those of you who have never heard of MuseScore, please read the following article on Wikipedia's website:
In the above article, MuseScore is compared to Finale and Sibelius, which are the two most well-known and most expensive music notation software programs available today. However, unlike Finale and Sibelius, MuseScore is free. In other words, until last year, the development of MuseScore since its infancy in 2002 has been made possible entirely by donations, and that's why it is 100% free. This brings me to my idea on how to put an end to the "255 bar limit" in BiaB, and this idea is based on the premise that the "255 bar limit" could be eliminated if BiaB's code was completely re-written with a 16-bit, 32-bit or even a 64-bit base. I'm sure there's a lot more to it than just re-writing BiaB's code, but I believe that this is the core issue. However, to accomplish this is going to cost a lot of money to pay for the necessary resources (software programmers) to get the job done. Here's my idea:
If PG Music is unwilling to set aside the money that is needed to pay the programmers to eliminate the "255 bar limit" (in spite of all the users that have asked them to do so) because of the possibility or even the probability that it will have to increase the price of BiaB to recoup that money, then perhaps the users of BiaB would be willing to donate the money if a fund was set up (KickStarter, perhaps) for this purpose. I don't know how much money it would take to accomplish this task, but if enough users expressed interest in participating in such an effort, I'm sure that PG Music would come up with a target amount that we would have to meet. So, that's my idea. What do all of you think of it? And what does PG Music think of it?
One final thought: If MuseScore can become such a powerful music notation program through the donations from its users so that it rivals both Finale and Sibelius, then surely BiaB's "255 bar limit" could be fixed through the donations from its users.
Muzikluver, you've put a lot of thought and detail into your post. Thank you for that.
I seem to recall that such funding ideas have been suggested in the past, and that PG Music has not wished to entertain them.
While your efforts are worthy of consideration, the program simply should not still have this significant limitation. Only PG Music can correct that, and they need to be willing to undertake the task, something that has not occurred up until this point in time.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Fixing the 255 measure limit is just one of the many areas that a complete rewrite of BiaB would eliminate. Things like opening all 16 MIDI channels for MIDI, RTs, RDs or any combination of them and the inclusion of time signatures like 5/4, 6/8, 7/4, etc, just to name a couple.
Me, it's not about how many times you fail, it's about how many times you get back up. Cop, that's not how field sobriety tests work.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Since I predominantly use MIDI, to overcome the 255 limit I do part of the song in BiaB, open a new BiaB project and do the rest of the song there. I export both as MIDI files and then splice them together in a MIDI sequencer or DAW. It's a work-around
On my BiaB wish list is enlarging the 255 limit, increasing the resolution to at least 240ppq and supporting real 6/8, 5/4 and other time signatures without having to do a 'work around' in the 1 through 4 beats per cell in the BiaB matrix.
I still love BiaB as it is, but for me these changes would make it better. Since I am on the outside looking in, I have no idea if these changes can be made with a good cost/benefit ratio or if the changes would ruin the back-compatibility that is so dear to the BiaB concept.
I wonder if part of the reason PG have not done this is backward compatibility of the file format. It has always been that case that pretty much any version of BIAB can open a file created by any other version. Even old version opening files created by newer versions.
Increasing the number of bars would probably break this. So PG would have to be sure it was worth it.
I seem to recall that such funding ideas have been suggested in the past, and that PG Music has not wished to entertain them.
While your efforts are worthy of consideration, the program simply should not still have this significant limitation. Only PG Music can correct that, and they need to be willing to undertake the task, something that has not occurred up until this point in time.
You may be right, VideoTrack, but I read through numerous discussions on this topic (after searching for it using Google) and couldn't find any suggestions of this nature anywhere. (If I had found one, I wouldn't have posted my suggestion.) However, during my most recent search for this topic (just a few minutes ago), I did find a discussion (from August 2016) I hadn't read before that contains a comment by jazzmammal in which he claims that addressing this limitation is "one of the primary reasons Real Band was created." IOW, RB is PG Music's suggested workaround, which is essentially the same as my workaround (except that I use Tracktion 6 because of its simpler GUI and minimal use of resources). This same discussion also touches on the Midi limitations that MarioD mentioned above. Here's a link to that discussion in case anyone is interested in reading through it:
Back in April, Alyssa of the PG Music Staff said this:
"Originally Posted By: VideoTrack ... An improvement would be to provide a warning that the track is truncated, and why.
(A better improvement would be to remove the 255 bar limit.)
Yes?
Alyssa: Hello VideoTrack,
Thank you for your feedback and suggestions and thanks to all others for their +1s! Your suggestion has been passed along to the developers."
************************************************ So of course they are aware of the users concern on this. Perhaps we just need to get muzikluver to copy his request to the BIAB for Windows WISHLIST forum, and then get as many users as we can to give it a +1, so PG Music will, once again, see our concern.
Back in April, Alyssa of the PG Music Staff said this:
"Originally Posted By: VideoTrack ... An improvement would be to provide a warning that the track is truncated, and why.
(A better improvement would be to remove the 255 bar limit.)
Yes?
Alyssa: Hello VideoTrack,
Thank you for your feedback and suggestions and thanks to all others for their +1s! Your suggestion has been passed along to the developers."
************************************************ So of course they are aware of the users concern on this. Perhaps we just need to get muzikluver to copy his request to the BIAB for Windows WISHLIST forum, and then get as many users as we can to give it a +1, so PG Music will, once again, see our concern.
Good luck! LLOYD S
Thanks, Lloyd, for your suggestion. I just posted it there as well.
I wonder if part of the reason PG have not done this is backward compatibility of the file format. It has always been that case that pretty much any version of BIAB can open a file created by any other version. Even old version opening files created by newer versions.
Increasing the number of bars would probably break this. So PG would have to be sure it was worth it.
Andy, I'm sure there are numerous issues (including backward compatibility of the file format) that have prevented PG Music from eliminating this problem along with other problems that stem from the original code base. But my thinking is that they should have made a decision to break free from the 8.3 filename limitations of DOS and all the other related issues back in the mid-90s just like Microsoft did when they introduced their NT line of operating systems for business users alongside of their Windows 3.1 non-NT OS for consumers, which paved the way for the eventual merging of both OS lines in Windows XP in 2001. Windows XP was Microsoft's first consumer-edition OS that was not based on DOS. Why can't PG Music do something similar with the intention of phasing out the current version of BiaB with all of its limitations in 3-5 years?
It is remarkable how many BIAB files I have that date all the way back to the 1990s. Many thousands more exist from PG Music and from the Internet. But I would assume there could be a conversion utility that would make the file format readable on a newer BIAB version that did not have the 255 measure limit. This utility should handle other related issues such as DOS-length filenames.
Without such a utility, I can understand if some users entrenched in older formatted songs, particularly those used as backing tracks to make a living, might forego the update to a new version.
Having said that, I have long believed that BIAB should fix this limit, even if it breaks backward compatibility.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
This utility should handle other related issues such as DOS-length filenames.
BIAB will already do a batch rename of files using the song title as the new filename. Unfortunately, a lot of old internet downloaded files are titled "Untitled".
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
RealBand will go way over 255 limit. But the funny thing is it's Biab that generates up the tracks for it (bbw2.exe) it will also generate up tracks with decimal point tempo maps (as Biab will round the tempos down 110.573 > 110 then have the next bar at 111). This was 384 bars with 5 tracks 600meg so as Biab generates the tracks direct to RAM this would not be an issue. The Biab plugin has the same problem and should be fixed soon with a new save format rather than .SGU just like ReaBand has .SEQ it will save more than 255 bars and will save decimal point tempo map.
Well, 8 or so years ago when Real Band first came out a lot of talk was the reason for it's existence was to solve a lot of Biab problems including this one. It seemed easier to rewrite Power Tracks to generate Biab files than it was to rewrite Biab itself.
Then of course for years after there was all this talk that the two should be combined. A brand new FrankenBoxDAW...
Personally I still think this is PG's answer to this, just use RB. After my debacle with trying to get folks vicariously marching with virtual pitchforks and torches about the lack of notation/printing improvements (I got 4 or 5 agreements and that's after me begging and bumping the thread twice) it appears that since Musescore and others work so well it's just not worth it to improve these things.
I think it boils down to how many people are really, seriously bothered by the 255 bar limit? It's probably a few more than the number who agreed with me about the need for notation printing improvements but still, not enough to really matter.
Wile I do appreciate the comments and totally agree with removing the 255 bar limit....... I have never ever come close to that limit with any of my songs. I have a few that are 5+ minutes long and they are nowhere close to the limit.
just curious.... what kind and length songs do you write that exceeds the 255 bar limit?
I could see if you were doing a cover of Innagoddadavida or Yes's Relayer..... Maybe even Alice's Restaurant.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Never have bumped into this upper limit. And if I did, I am sure any number of work around would solve this for me. So I am going to save my +1's for the BIAB VST which needs a lot of love.
I found a work around: somewhere before the max number is reached, lets say bar 220: re-address the styles in this bar's settings ... I had to do it at bar 120 with a halftime RT filled songfile. F
Wile I do appreciate the comments and totally agree with removing the 255 bar limit....... I have never ever come close to that limit with any of my songs. I have a few that are 5+ minutes long and they are nowhere close to the limit.
just curious.... what kind and length songs do you write that exceeds the 255 bar limit?
I could see if you were doing a cover of Innagoddadavida or Yes's Relayer..... Maybe even Alice's Restaurant.
Originally Posted By: MusicStudent
Never have bumped into this upper limit. And if I did, I am sure any number of work around would solve this for me.
Reaching the 255 bar is really easy if you're used to practice songs in all 12 keys, a standard exercise for a lot on jazz musicians.
This limit could be avoided using the "Each chorus that song is playing transpose by x semitones" function, but this feature has not worked for years:
So, such a simply thing like practicing a jazz standard in all 12 keys is something that can't be done in BIAB because the 255 bar limit, and because a bug that affects the basic functionality of the program and that has been reported for years has never been fixed.
Reaching the 255 bar is also really easy if you use the double-time feature that PG Music introduced a couple of years back. When using that feature, you reach the 255 bar limit at 128 bars
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.