Previous Thread
Index
Next Thread
Print Thread
Go To
Page 5 of 12 1 2 3 4 5 6 7 11 12
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
In these days if you don't submit a perfect demo to a producer he wont even listen. Even if the song than goes 180°. I also do some local producing. If the artist doesn't care about his demo why should I.

When I gave my first song to my producer for him to evaluate at the beginning of 2017, I sent it to him as a .PDF of my lead sheet with the lyrics, melody, and chords. I also gave him a link to a video of MuseScore playing the melody of my song as it scrolled through the lead sheet, which I had uploaded to my Youtube channel. At the time, I was only interested in him producing this one song for me and didn't have any plans for him to produce an entire album because I didn't have enough songs of the same genre written yet that he could produce as an album. (I only had three other songs in the works at the time.) But after he agreed to produce this one song for me, one thing led to another with the result that he's now working on my seventh song, and I have three to four more in the queue.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
Send me a link to an xml file and I'll send you back a song done my way.

Sure, I'd be interested in hearing a demo of one of my songs done your way. To make this a fair and straightforward comparison of your way vs. my way, I'd like to sent you a file of the first song that I created a demo of using BiaB back in January. I can also send you a link to a video of my demo for you to listen to, but I think you should create your demo before you hear mine---unless you feel otherwise for some reason. So, how do I do that?


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: May 2003
Posts: 8,021
Veteran
Offline
Veteran
Joined: May 2003
Posts: 8,021
Post a link here.


John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
Post a link here.

I sent you a PM with three links.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: May 2003
Posts: 8,021
Veteran
Offline
Veteran
Joined: May 2003
Posts: 8,021
Ok cool.


John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: Charlie Fogle
<<< I'll let all of you know when they get back to me and what they say about all of this. >>>

Please do. It's an intriguing problem.

Charlie


It's been over three days since I replied to Tech Support's response to the original email I sent them about this issue and asked them to revisit it, but I still haven't heard back from them. How much longer should I wait for them to write me back before I either write them again or give them a call?

Last edited by muzikluver; 06/15/19 02:52 PM. Reason: Added a quote from Charlie

Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2013
Posts: 8,205
C
Veteran
Offline
Veteran
C
Joined: Apr 2013
Posts: 8,205
Originally Posted By: muzikluver
Originally Posted By: Charlie Fogle
<<< I'll let all of you know when they get back to me and what they say about all of this. >>>

Please do. It's an intriguing problem.

Charlie


It's been over three days since I replied to Tech Support's response to the original email I sent them about this issue and asked them to revisit it, but I still haven't heard back from them. How much longer should I wait for them to write me back before I either write them again or give them a call?


I'd send them a gentle reminder email in the morning.


BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: Charlie Fogle
Originally Posted By: muzikluver
Originally Posted By: Charlie Fogle
<<< I'll let all of you know when they get back to me and what they say about all of this. >>>

Please do. It's an intriguing problem.

Charlie


It's been over three days since I replied to Tech Support's response to the original email I sent them about this issue and asked them to revisit it, but I still haven't heard back from them. How much longer should I wait for them to write me back before I either write them again or give them a call?


I'd send them a gentle reminder email in the morning.

Charlie, I just sent Tech Support the following email:

"Hi Joe,

I'm writing you again to follow up on the status of your investigation into an issue that I initially contacted you about a week ago today. Though you did reply to my original email last Monday, I wrote you again on Tuesday because the information you provided in your reply did not directly address RealBand's implementation of the Band in a Box track generation algorithm. Instead, it focused on Band in a Box itself and presented a workaround to the 255 bar limit using Band in a Box. Because I already have my own Band in a Box workaround that is more suitable than yours for the types of instrumental arrangement demos I'm creating for songs that exceed the 255 bar limit and because I have the impression from another RealBand user (whose user name is jazzmammal) that RealBand is your solution to the 255 bar limit in Band in a Box, I would like you to take a closer look at the problem in RealBand that I'm presenting to you by reading through the discussion I started in the Windows RealBand product forum with the same title as this email. Only then will you understand why I contacted you in the first place about this problem and why I am following up with an additional reply to your only email reply to my original email. In addition, because it has been several days longer than the typical reply time of 0-2 days that is mentioned in your auto-reply email, I want to make sure that this issue isn't being inadvertently neglected. Though I've already provided these to you in both of my previous emails, below are links to the discussion I started in the Windows RealBand product forum along with two other related links.

(Links)

Thanks for your assistance with this issue.

Tom"


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
Starting out with all regular tracks in RB and generating a track I noticed at the very top " generating 1/2. It generated up to bar 240 than 240 to the end. Small vertical bar at 240. Changed chord at bar 240 and it followed. It was seamless.I suspect the onger the song the more steps.

Silvertones, I'm curious about a couple of things regarding your track generation test:

1) Did you have a chord entered into bar 241 before you generated this track?

2) If so, did you listen to a small section of the track that includes a few bars immediately before and after the 240/241 bar boundary to determine if an audio glitch occurs on the 240/241 bar boundary as a result of RB's attempt to change to a different chord than the one you had entered into bar 241?

3) If you did not have a chord entered into bar 241 before you generated this track, did you listen to the same section to determine if RB erroneously inserted its own chord change into bar 241 and if you could tell if that chord was a C chord?

4) Are the "regular tracks" you started out with in RB the same as BiaB tracks (or "BB tracks," as RB refers to them)? My understanding is that "regular tracks" are different from "BB" tracks. If my understanding is correct, doesn't RB have to convert regular tracks to BB tracks before it can generate an arrangement for those tracks?


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: May 2003
Posts: 8,021
Veteran
Offline
Veteran
Joined: May 2003
Posts: 8,021
1.yes
2.yes
3. I'd have to say no cause I had different chords 240 and 242 but it was perfect.
4. No I start with all REGULAR TRACKS NO BB TRACKS. I ALWAYS just right click on a track and choose generate/ Real Track.
The RT pick list will come up an d I choose them one at a time. Styles mean nothing when it comes to the use of RTs.


John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: MusicStudent
No matter how much we may want BIAB to behave differently, it generally comes down to the fact that there is a workaround to get done what you need. It is just a shame sometimes that so much effort goes into learning this lesson for newbees. But as long as you are having fun... crazy

MusicStudent, you make made a very good point. Actually, you made two very good points. The first one is that there is a workaround to the "255 bar limit" in BiaB. In fact, there are numerous workarounds to this limit. Some of those workarounds can be implemented within BiaB itself while others involve the use of other programs like RB (as jazzmammal mentioned in response to my suggestion of an idea to fix this limit in the BiaB Windows product forum or like other DAWs (Tracktion, for example) using the BiaB VST plugin (as Pipeline mentioned in that same discussion).

The second "very good point" you made is that "it's a shame sometimes that so much effort goes into learning this lesson for newbies." Fortunately for me as a newbie, it didn't take me very long to figure out on my own a workaround to this limit that suited my needs. But other newbies may not be so fortunate. Therefore, because of the likelihood that PG Music will never fix or eliminate this limit in BiaB, I have a suggestion that would be of benefit not just to newbies who have difficulty figuring out their own workaround to this limit but also to experienced users like yourself who may get tired of seeing this "dead horse" being beaten to death over and over again in these forums. My suggestion is as follows:

Why doesn't someone (such as yourself or another experienced user like Charlie Fogle or jazzmammal) start a discussion in the BiaB forum with the topic heading of "Known workarounds to the 255 bar limit in BiaB" (or something similar) that would serve as a central repository of all these workarounds for newbies and experienced users alike to reference whenever the need arises? (To my knowledge, such a repository doesn't exist. If it does, then please point me to it.) For example, newbies who encounter this issue and inquire about a workaround could be referred to such a discussion instead of spending time rehashing the same stuff ("beating this dead horse") in a new discussion. Also, various workflow scenarios could also be discussed in connection with those workarounds with the goal of determining which workaround would be best suited for a particular workflow scenario. Because you seem to have become frustrated with this discussion and with the other discussion I started in the BiaB forum, why don't you take it upon yourself to implement my suggestion? I'll be glad to share the workaround I've been using for my particular workflow scenario (as I've already done in this forum) and contribute my thoughts on and experience with other workarounds that are mentioned.

Last edited by muzikluver; 06/16/19 08:13 AM. Reason: Added a second "very good point" that MusicStudent made

Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: May 2003
Posts: 8,021
Veteran
Offline
Veteran
Joined: May 2003
Posts: 8,021
Did some testing:
1. The song you sent is only 173 bars long per the PDF
2. It put down all the chords and they all appear to be right. I'll let you do that leg work.
3. I got the piano part as well BUT it was like only 1/16 of measure 1
4. I generated 3 RTs in about 5 mins.

PM me an email address and I'll send you what I got.


John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
Did some testing:
1. The song you sent is only 173 bars long per the PDF
2. It put down all the chords and they all appear to be right. I'll let you do that leg work.
3. I got the piano part as well BUT it was like only 1/16 of measure 1
4. I generated 3 RTs in about 5 mins.

PM me an email address and I'll send you what I got.

1. Correct, I didn't send you a song that exceeds the 255 bar limit. I didn't know you wanted one of those because I thought that you just wanted to demonstrate the difference between your procedure of using RB and generating individual RealTracks vs. my procedure of using BiaB to generate all tracks with a particular Style.
2. I'm sure the chords are correct, but I'll check them anyway.
3. There is no separate piano part. The piano part is the entire melody. The first measure doesn't have anything in it. I included two blank measures at the beginning to correspond to the two lead in measures that BiaB creates (which can be turned off). I left those two measures in place so that the melody could be synced up with the chords. Normally, I export the .XML file without those two measures for importing into BiaB and then export a separate .WAV file with those two measures in place. If RB didn't create a separate midi track for the melody, then it doesn't have this available for reference when generating each track like BiaB did for me.
4. That sounds about right.

The limit for email is 10 MB. You'll have to export a .WAV and convert to .MP3 or export a .MP3 file that is less than 10 MB (for a song this long, it will be). I'll send you my email address in a PM, but you may want to take the info above into consideration before sending me what you have. Thanks!

Last edited by muzikluver; 06/16/19 09:14 AM. Reason: .MP# -> .MP3

Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Silvertones, you posted the following in response to my comment about the midi file not having the chords and then you made a subsequent post with your offer to create a demo for me done "your way" using RB (as described below) for me to compare to a demo done "my way" using BiaB:

Originally Posted By: silvertones
It will. It'll interpret the midi notes in the score.If you get weird chords they will be technically correct but may not be pleasing. Those you can change.
Btw also drop the use of biab. I did 10 years ago. Learn RB it does more than biab.The xml file should work the same.
Before you import turn all bb tracks in RB to regular tracks.This should give you the whole song in midi format.Right click on a track in RB and generate any Real track. Forget about styles for RT. Just add 1 track at a time with musicians you want not those dictated by the style.
Sidebar: I'm a pro player playing 4 days a week for 8 months. Then I go into new song mode. I have over300 songs done this way.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: Charlie Fogle
Not to worry. Your work in MuseScore and .XML files is a brilliant idea and allows you to construct a song in such a manner it's much like a roadmap of your completed song. Because of the length of your song projects and also the fact there's so much post editing, an .XML file is crucial to staying on track to how the song is constructed, the arrangement of how instruments weave in and out of your arrangement and how you dynamically build your song. Don't make any changes to how you presently use .XML files to input your chords, melody, key signature and tempo.

What I suggest is that rather than think of BIAB to generate a song, think of it to generate each section of your song. Rather than record all of your song as one linear song, record each section of your song, export that section's audio and in a DAW, stitching each section together. That's a recording technique called overdubbing and it's used extensively in studio recordings. Each section of your song will be comprised of it's own BIAB .sgu file. This replicates the concept of a live musician recording a verse separate from a chorus, separate from a bridge, separate from the intro and outro. This alone eliminates the 255 bar limitation of BIAB. Generating and saving the audio of each section of your song allows you to drop that audio into it's place in an master audio file. That bypasses the long entire song renders you currently have to do. If you make edits to verse 3, you only work within the BIAB .sgu file of the saved Verse 3. The rendered audio with the updated edits then overwrites and replaces the current audio populating Verse 3 of your master audio file.

As you know, Charlie, silvertones recommends that I drop BiaB completely and use RB instead. That may be beneficial in some workflow scenarios but perhaps not others. So on the one hand, before I decide to do that, I need to do enough testing with the procedure he is suggesting that I use on my songs with RB to make sure that's the right decision for me and my needs. On the other hand, I need to have a better understanding of the procedure you're suggesting I use so that I can go through the steps involved in that procedure in order to make a proper comparison between your suggested use of BiaB and his suggested use of RB. Therefore, I have some questions for you about your suggested procedure because I'm having trouble following all the steps in your explanation.

For example, in the above excerpt of your recent post, you mention a "master audio file." I assume you are referring to an audio file in a DAW such as RB or Tracktion. If so, then would each generated section of my song exist on its own track to make it easier to update? If so, that would eliminate the free version of Tracktion as a viable DAW because it only comes with 8 tracks, and I don't think more can be added. (This wouldn't prevent me from using RB, of course.) If not, then the best way for me to update an audio section in Traction would be to overwrite the contents of the existing audio section file that I had previously imported because it already is positioned at the proper location in the song. This would not be possible, of course, if I need to add or remove a measure during my editing of that audio section or of another audio section. In that case (which occurred a few times in the song I was working on a few months ago), other sections of the song would have to be moved in order to avoid gaps or overlaps in the song.

Another question I had pertains to my importation of an .XML file. You discussed the need for numerous folders to contain all the different sections of my song in BiaB. In order for me to create those different sections, I would need to create multiple .XML files within MuseScore for each section of my song and also have a complete master .XML file as the main road map of the song. I would also need to make changes to the master file and then copy those changes to one or more of the sub-sections as I go along, and then open the .XML exports from the edited sections into BiaB to regenerate the audio for them, etc. Am I correct?


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: muzikluver
Another question I had pertains to my importation of an .XML file. You discussed the need for numerous folders to contain all the different sections of my song in BiaB. In order for me to create those different sections, I would need to create multiple .XML files within MuseScore for each section of my song and also have a complete master .XML file as the main road map of the song. I would also need to make changes to the master file and then copy those changes to one or more of the sub-sections as I go along, and then open the .XML exports from the edited sections into BiaB to regenerate the audio for them, etc. Am I correct?

I think I figured out the answer to my own question above. Correct me if I'm wrong. Instead of creating multiple .XML files (one as the master and the others as sections of the master), it would be better to just stick with one .XML file (that would have its name changed with each iteration) to open in BiaB. Then, I would delete all the measures within BiaB for all the sections except for a particular section for which BiaB would be used to generate tracks. This could be done repeatedly for one section (for example, the verse section) that ends up being modified multiple times while all the other sections remain intact both in the MuseScore master file and in the master audio file.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: silvertones
Btw also drop the use of biab. I did 10 years ago. Learn RB it does more than biab.The xml file should work the same.
Before you import turn all bb tracks in RB to regular tracks.This should give you the whole song in midi format.Right click on a track in RB and generate any Real track. Forget about styles for RT. Just add 1 track at a time with musicians you want not those dictated by the style.

It may be desirable to drop BiaB and only use for songs that are ready for final production or that are close to that stage. But BiaB is very useful for working out the kinks in a song that is just being developed. For example, figuring out which chord progression sounds best for a particular section of the song or if one or more notes in a section should be modified to find out if they sound better than the current notes in that section. Because BiaB's track generation only takes seconds in comparison to the minutes that RB takes, making such changes in BiaB and listening to the quickly-generated results makes a lot more sense to me than doing this in RB.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2018
Posts: 266
Apprentice
OP Offline
Apprentice
Joined: Apr 2018
Posts: 266
Originally Posted By: Jim Fogle
One big difference between Band-in-a-Box and RealBand is how the two programs approach track generation.

Band-in-a-Box generates a few bars of each track then begins audio playback. Band-in-a-Box then continues to play audio while also continuing to generate tracks as a background task. Sometimes the program will stall because audio playback catches up to track generation so there is temporarily nothing to play. If that frequently happensns a user can go to preferences > RealTracks and remove the check mark for, "Speed up generation of RealTracks (disable on slow machines)". When that feature is disabled Band-in-a-Box will completely generate all tracks prior to starting audio playback.

Another way Band-in-a Box works is when the generate button is selected, ALL tracks are generated unless a track is frozen. By-the-way, Band-in-a-Box use to have only a combined play and generate button so every time you clicked play a new arrangement was created.

Finally, when a track is generated all the track is generated.

Now for RealBand. RealBand does partial or complete track generation; it depends on what is highlighted. Nothing is generated until the generate button is pressed. Audio playback does not begin until all track generation is complete.

Corresponding to the difference between how these two programs perform track generation is the time it takes each program to accomplish these tasks, which I didn't mention in my previous reply to your post, Jim, though I did mention this in a subsequent post and explained that the quickness of BiaB's approach makes BiaB more suitable than RB for working out the kinks in a song that is being developed (as an example). However, this has not deterred silvertones from abandoning BiaB completely and suggesting that I do the same. But as I've thought about the speed differences in these two programs, it occurred to me that RB would be much faster if it took advantage of Windows' multi-threading capabilities. For example, I have a 3 Ghz Quad Core PC. This makes it possible for a program like Format Factory to convert four .WAV files to four .MP3 files simultaneously because each of those files is processed independently by each of the four cores. Why doesn't RB do the same thing with songs that have four or more tracks? I know that silvertones likes to generate one track at a time after he selects a RealTrack that he wants to use for a particular track. But for someone who prefers to use a BiaB Style that has at least four instruments and wants to generate all four of those tracks at the same time, RB should be able to hand each of those track generation operations over to separate cores in the CPU to handle, thus reducing the amount of time it takes to generate those tracks by a factor of four. The same would be true of the generation of an eight track song on a PC with eight cores in the CPU, except that the time would be reduced by a factor of eight. If PG Music would make it possible for RB to multi-thread, it would be much more desirable for me and other users to use it instead of BiaB more often than not.


Tom Levan (pronounced La-VAN)
BiaB 2024 Win UltraPAK Build 1109, Xtra Style PAKs 1-11, RB 2024, Windows 10 Pro 64-bit, Intel Q9650 3 GHz, 16 GB RAM, 500 GB SSD & 2 TB HDD, Tracktion 6 & 7 (freebies), Cakewalk, Audacity, MuseScore 2.1 & 3.4, Synthesizer V
RealBand
Joined: Apr 2013
Posts: 8,205
C
Veteran
Offline
Veteran
C
Joined: Apr 2013
Posts: 8,205
Originally Posted By: muzikluver


Why doesn't someone (such as yourself or another experienced user like Charlie Fogle or jazzmammal) start a discussion in the BiaB forum with the topic heading of "Known workarounds to the 255 bar limit in BiaB" (or something similar) that would serve as a central repository of all these workarounds for newbies and experienced users alike to reference whenever the need arises? (To my knowledge, such a repository doesn't exist. If it does, then please point me to it.)



such a BIAB forum discussion area exists.



Here ->-> -> -> -> -> ------------> Forum List\Post your own Tip and Tricks


BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
RealBand
Joined: Apr 2013
Posts: 8,205
C
Veteran
Offline
Veteran
C
Joined: Apr 2013
Posts: 8,205
Originally Posted By: muzikluver
Originally Posted By: muzikluver
Another question I had pertains to my importation of an .XML file. You discussed the need for numerous folders to contain all the different sections of my song in BiaB. In order for me to create those different sections, I would need to create multiple .XML files within MuseScore for each section of my song and also have a complete master .XML file as the main road map of the song. I would also need to make changes to the master file and then copy those changes to one or more of the sub-sections as I go along, and then open the .XML exports from the edited sections into BiaB to regenerate the audio for them, etc. Am I correct?

I think I figured out the answer to my own question above. Correct me if I'm wrong. Instead of creating multiple .XML files (one as the master and the others as sections of the master), it would be better to just stick with one .XML file (that would have its name changed with each iteration) to open in BiaB. Then, I would delete all the measures within BiaB for all the sections except for a particular section for which BiaB would be used to generate tracks. This could be done repeatedly for one section (for example, the verse section) that ends up being modified multiple times while all the other sections remain intact both in the MuseScore master file and in the master audio file.


How you do this is determined by MuseScore. If MuseScore can assign a name to a series of bars, that is all you need to do to an .XML file different than what you do now. Otherwise, you will mark sections and name these sections of your song once the file is opened in RealBand. Example: Bars 1-12 (Intro); Bars 13-21 (Verse 1) and so on until your entire song has been broken into sections and each section is named according to what it is. What's important is that your song is broken into identifiable sections. This technique will make constructing or editing your song super manageable, super easy and super fast in comparison to your current workflow. It can literally turn hours of edits and arranging into minutes.

In DAWs this technique is call arranging. All DAWs have this feature as far as I know. I've never encountered one that doesn't in the few other DAWs I've used or watched videos of. I use Presonus Studio One 4 Pro and it places a lot of emphasis on working in the Arrangement Window as does Pro Tools and Ableton. RealBand has this feature although not as complex or advanced as some other DAW's. Doesn't matter. Even RB will make constructing a song (arranging) or editing it so much easier and faster.


How does a DAW or RealBand do this? By taking advantage that every track of a song recorded in a DAW can match the song tempo to a grid. The audio/midi/loop/sample can be placed at exactly the correct point to seamlessly merge with any prior audio from that point and any subsequent audio from that point. This works with a single note, single word, single phrase, whole verse, chorus, bridge, intro or ending.


To demonstrate the technique, regardless of what format you provide a demo to your producer, assume the producer reviews your project and gets back to you with the suggestion your demo song needs a 8 bar bridge between verse 3 and the last chorus. He/she further suggests the bridge's tempo be increased from 116 to 118 to make it more dynamic and the tempo should be dropped back to 116 at the last chorus. A final suggestion is to use a different chord progression than the intro or any verse or chorus.


For demonstration, your song has an 8 bar intro. Twelve bar verses and a 16 bar chorus. Using this technique, you have sectioned and named your song project when you created it. You have created a folder tree that follows and aligns with your song section structure. Intro, verse, verse 2, verse 3, chorus and outro. Following your MuseScore .XML file, you create a BIAB .sgu file saved and named to correspond to each section and placed in the corresponding sub folder in your song folder tree.


In this example you would first create a sub folder in your folder tree that corresponds with the Bridge you will create.

Second, open up the 8 bar intro BIAB .sgu file to create the 8 bar new section from and name it Bridge. Do a Save As - Bridge.sgu into the Bridge sub folder you created.

Working in BIAB project Bridge.sgu, Increase the tempo from 116 to 118

Decide on the bridge's chord progression and modify the chord chart accordingly.

If necessary or desired, change the style of modify the instruments and also changes to any bar using the bar settings.

Once you are satisfied with the Bridge's arrangement, Render the audio and save it into the Bridge sub folder.

Open your original RealBand project for your demo

Save a new and renamed version of the RB /seq file as your new file will now contain a bridge section

From the Bridge sub folder, select the Bridge audio file

Go to the Marker for the last chorus

Paste the bridge audio snippet at the marker for the last chorus

This inserts the bridge audio between verse 3 ending and the last Chorus just as your producer suggested. It is cross faded and seamless. If for some reason it isn't seamless, RealBand uses an artificial intelligence algorithm that can regenerate the audio to be seamless in a single step. (more about this powerful and unique feature later. RB is the only DAW that can do this)


So, after reviewing these changes to your demo, your producer comes back and is happy with the changes but now wants to eliminate the intro and begin the song with a Chorus then proceed with verse 1.

you open up the latest RB version of the project, Set the cursor at the beginning of a Chorus, Using Block\Select current selection - This will highlight and select the complete chorus section.

Go to the beginning of the song and set your curser at the beginning of the intro. Repeat the Block\Select current selection command. This highlights the Intro. Paste the copied Chorus at the beginning of the Intro and the Chorus audio replaces the Intro.

I added a photo to show a Marker block section highlighted.









Attached Files (Click to download or enlarge) (Only available when you are logged in)
RB Markers.JPG (338.79 KB, 72 downloads)
Last edited by Charlie Fogle; 06/17/19 04:03 AM.

BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Previous Thread
Next Thread
Go To
Page 5 of 12 1 2 3 4 5 6 7 11 12

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Mac!

We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!

With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!

Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!

Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!

Learn more and listen to demos of XPro Styles PAKs.

Watch the XPro Styles PAK 7 Overview & Styles Demos video.

XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Mac!

Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!

Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!

In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!

Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!

Learn more and listen to demos of the Xtra Styles PAK 18 here.

Watch the Xtra Styles PAK 18 Overview & Styles Demos video.

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Windows!

Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!

Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!

In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!

Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!

Learn more and listen to demos of the Xtra Styles PAK 18 here.

Watch the Xtra Styles PAK 18 Overview & Styles Demos video.

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Windows!

We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!

With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!

Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!

Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!

Learn more and listen to demos of XPro Styles PAKs.

Watch the XPro Styles PAK 7 Overview & Styles Demos video.

XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

Video - Band-in-a-Box® DAW Plugin Version 6 for Mac®: New Features for Reaper

Band-in-a-Box® 2024 includes built-in specific support for the Reaper® DAW API, allowing direct transfer of Band-in-a-Box® files to/from Reaper tracks, including tiny lossless files of instructions which play audio instantly from disk.

We demonstrate the new Reaper features in the Band-in-a-Box® VST DAW Plugin 6.0 in our video, Band-in-a-Box® DAW Plugin Version 6 for Mac®: New Features for Reaper

Band-in-a-Box® 2024 for Mac® - Update Today!

Already grabbed your copy of Band-in-a-Box® 2024 for Mac®? Head to our Support Page to download build 803 and update your Band-in-a-Box® 2024 installation with the latest version developed by our team!

Learn more & download now.

Band-in-a-Box® 2024 for Mac® Video - Over 50 New Features and Enhancements!

Read all about the 50+ newest features in Band-in-a-Box® 2024 for Mac®, or you can watch our video "Band-in-a-Box® 2024 for Mac®: Over 50 New Features and Enhancements!" to see it in action!

Forum Statistics
Forums65
Topics82,937
Posts751,224
Members38,948
Most Online2,537
Jan 19th, 2020
Newest Members
ryand1959, Real Deihl, Karim Buzdar, PaleyShelie, MMSC
38,948 Registered Users
Top Posters(30 Days)
Al-David 101
DC Ron 100
rsdean 100
MarioD 99
BYOBand 75
dcuny 69
Today's Birthdays
carlo
Powered by UBB.threads™ PHP Forum Software 7.7.5