Previous Thread
Index
Next Thread
Print Thread
Go To
Band-in-a-Box for Macintosh
Joined: Jun 2019
Posts: 25
G
Gazman Offline OP
Enthusiast
OP Offline
Enthusiast
G
Joined: Jun 2019
Posts: 25
Hello everyone.

I hope someone can please assist with this ..

I have completed a newarrangement in BIAB chord chart window.

I have implemented several volume and real tracks instrument changes via a right-click into "Bars Settings" and made changes this way in several different places\measures within the chart for different instruments.

Normally, each time I right click on a bar and select "bar settings" and make a new setting (e.g. adjusting an instrument volume up or down, mute an instrument or add a new real track in that measure, there is normally a red line appearing in the actual measure location. (this is what has always occurred in my 3 or so years with BIAB, and, once the file is saved, the bar settings changes are saved with it). Yes? .. well it's not happening.

I have made changes as described above and saved the SGU file. Whn I return, the changes are all gone!

On later opening BIAB and opening that same file ... I find that all the new adjustments I have made in 'bar settings' have vanished (new real tracks changes, instrument volume changes, muted instruments etc have all reverted to nothing and all previously saved adjustments to the song no longer exist. (In other words, when I right click on Bar Settings .. everything has reverted to a blank default setting for each instrument)

I have repeated the process again and implemented the same adjustments into the Bar Settings (such a muting drums where required, setting drums "back to normal" where required, reducing guitar volume for several measures etc., and other changes) .. I have done this all the way through the chart .. I save the file again, I close BIAB open it up again, load the song to find all the changes are lost again????

The chords in the sing are there and visible, the repeats are correct and visible, the pushes, holds etc are all there as needed but all changes made via Bar Settings to any individual track\instrument are completely lost. This has repeatedly occurred over the past 24 hours and I have not altered my system or added anything new in that time.


PLEASE HELP! This is extremely frustrating.

Thank you,

Gary.

Band-in-a-Box for Macintosh
Joined: Oct 2008
Posts: 18,887
Veteran
Offline
Veteran
Joined: Oct 2008
Posts: 18,887
Gary,

What version of BIAB are you running?

Have you tried returning to factory settings? (This is under the Options menu.) I always use the "MOST" settings option first. Prior to doing that, though, I suggest saving your present settings -- this is also a selection under the Options menu.

Regards,
Noel


MY SONGS...
Audiophile BIAB 2024
Band-in-a-Box for Macintosh
Joined: Jun 2019
Posts: 25
G
Gazman Offline OP
Enthusiast
OP Offline
Enthusiast
G
Joined: Jun 2019
Posts: 25
Hi Noel, thanks for your reply.
I have gone to options and selected Return TO Factory Settings ...

Before returning to factory settings I made some initial changes in the first few measures in teh chart, I then saved the file - closed and re-opened BIAB. It appears to have "held" the changes. THANK YOU!

I have no idea what caused this.., the other thing I just noticed was (prior to returning to factory settings) it also wasn't loading a loop file in the mixer which had previously been saved with the song file several times. WHen opening teh song file the loop file was no there.

I'll keep trying now and hopefully (thanks to your suggestion) I can complete all required changes again and this time hopefully keep them, I'll let you know how I go asap.

Thanks again! so much,
Cheers!

Band-in-a-Box for Macintosh
Joined: Jun 2019
Posts: 25
G
Gazman Offline OP
Enthusiast
OP Offline
Enthusiast
G
Joined: Jun 2019
Posts: 25
Hello Again.,
well I spoke too soon.

The "return to factory settings" seemed to help although it's been short-lived. After returning to factory settings and making my required changes to instruments via "Bar Settings" it initially worked ... (i.e. I was able to close down the program and re-open it later on to pick up where I left off).

THEN .. an hour later I opened BIAB to complete the same file and all previous changes made via Bar Settings were COMPLETELY GONE AGAIN! (arrangement window has remained the same but all changes to individual measures via bar settings have been removed to nothing!

This is a big issue for me as I find no new arrangement file works satisfactorily without making at least some modifications to instruments via Bar Settings option.

Now at a complete loss.

Band-in-a-Box for Macintosh
Joined: May 2002
Posts: 6,974
PG Music Staff
Offline
PG Music Staff
Joined: May 2002
Posts: 6,974
Do you have version 2018 build 267? (check Band-in-a-Box menu | About)

Also, are you on an admin or standard account on the Mac? (check System Prefs -> users) Which OS?

You should download and reinstall this to be sure, as it will also fix any permissions problems with the Band-in-a-Box folder there might be.
https://www.pgmusic.com/support_macintoshupdates.htm

I'm not sure what could be causing it, are you sure that you are opening the same file? It seems like the most likely cause is that it's not the same file somehow...

- For example, if you started with MySong.SGU and added a melody, it's going to save it as MySong.MGU. Perhaps you are opening MySong.SGU?

- Or, maybe the same song saved in two different locations and/or you're running Band-in-a-Box from your hard drive vs. internal drive? Next time you save the file, give it a unique name

- If it's not somehow a duplicate file or permissions problem, are you able to link to or email a file with this problem so that we can take a look?


Andrew
PG Music Inc.
Band-in-a-Box for Macintosh
Joined: Jun 2019
Posts: 25
G
Gazman Offline OP
Enthusiast
OP Offline
Enthusiast
G
Joined: Jun 2019
Posts: 25
Hi Andrew,
thanks for your reply.

I have version 2018 build 267 and running on MacOSX 10.14.6 with 2 user accounts, (my own main admin account plus a guest a\c for my wife which never gets used anyway)

I have checked my BIAB song folder and I have only the one song file (i.e. MySong.SGU) and while I do have external drives for storage and backup, I do not save my songs on external drives.

I will download the update you have linked and get back to you with what happens next.

Band-in-a-Box for Macintosh
Joined: May 2002
Posts: 6,974
PG Music Staff
Offline
PG Music Staff
Joined: May 2002
Posts: 6,974
Ok... please send the song in to support referencing this post, and we'll take a look. Ideally, include "before" and "after" version of the song. (the 'after' version being the one that should contain bar settings).


Andrew
PG Music Inc.
Band-in-a-Box for Macintosh
Joined: Jun 2019
Posts: 25
G
Gazman Offline OP
Enthusiast
OP Offline
Enthusiast
G
Joined: Jun 2019
Posts: 25
Hi Andrew and Noel96, downloading and re-installing the https://www.pgmusic.com/support_macintoshupdates.htm update
seems to have fixed it. (I had previously installed this update but re-installing it appears to have rectified the issue. (I have no clue to what may have caused this problem)

I was able to enter instrument and dynamic changes via Bar Settings and save the SGU file out, close BIAB and when re-opening the prior changes were saved and all correct.

So (for now) I believe the issue to be resolved thank you!

I do have one other query which I have not been able to find in the manual .... when implementing "pushes and holds" in a chord chart that has chorus repeats, how do I set the pushes and holds to occur on the repeat and not on the 1st time through? (or vice-versa)??

I understand it's possible to do this but have no idea how to make pushes\holds play one time and not on the repeat chorus..

Many thanks,
Gary.

Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®

The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!

His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!

Watch: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box


Band-in-a-Box® 2024 German for Windows is Here!

Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!

Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!

Paket | Was ist Neu

Update Your PowerTracks Pro Audio 2024 Today!

Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!

Learn more about this free update for PowerTracks Pro Audio & download it at www.pgmusic.com/support_windows_pt.htm#2024_5

The Newest RealBand 2024 Update is Here!

The newest RealBand 2024 Build 5 update is now available!

Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.

This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245

The Band-in-a-Box® Flash Drive Backup Option

Today (April 5) is National Flash Drive Day!

Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!

For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.

Backup copies are offered during the checkout process on our website.

Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!

Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.

Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.

Update your Band-in-a-Box® 2024 for Windows® Today!

Update your Band-in-a-Box® 2024 for Windows for free with build 1111!

With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!

Learn more about this free update for Band-in-a-Box® 2024 for Windows at www.pgmusic.com/support_windowsupdates.htm#1111

Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!

If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.

A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."

"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."

"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."

Forum Statistics
Forums66
Topics81,642
Posts735,387
Members38,525
Most Online2,537
Jan 19th, 2020
Newest Members
theyearofjess, OlvaJownDay, Tranner Track, Ely Bass, Barking
38,525 Registered Users
Top Posters(30 Days)
MarioD 183
DC Ron 101
dcuny 89
rsdean 70
Today's Birthdays
There are no members with birthdays on this day.
Powered by UBB.threads™ PHP Forum Software 7.7.5