This can probably best be achieved by changing Styles at the correct locations within the song.
Start by choosing the 6/8 style for your song. Select the bar that the chorus starts, press function key <F5> (or right-click and select Bar Settings), and select a 4/4 style from the .STY button option.
Repeat when you need to revert to 6/8 if it's further along in the song.
FWIW I'd use Realband for this. It lets the same style be used over different time signatures better than BiaB in my opinion. Including the use of Time Signatures not even allowed in BiaB (7/4 etc). You wouldn't need to change styles, just change the time sig for the desired bar(s) and change it back to original after that section, then regenerate.
just a thought YMMV depending on the style.
Last edited by rharv; 05/04/1904:39 AM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
a 6/8 style in 4/4 was giving me 12/8 so...Have got the playback timing correct by setting the time sig to 2/4 BUT now the chords in the second half of the bar/measure are missing in the leadsheet?!? Grrrrrrrrrrrr
Leave it in 4/4. Then open the style picker and type words in the filter like “Celtic” or “6/8” “12/8” etc and choose a style that fits.
You will then enter up to 4 chords per 4/4 bar, with each bar equivalent to two bars of 6/8.
The notation will show in 4/4, but there is a setting on the notation to switch the display to 6/8, so it looks just like your printed notation books.
The only thing you can’t do is enter chords on different triplets, just the first and fourth triplets of the 6/8 bar.
If musicians are playing Macnamaras Band, they don’t count it in in 6/8 and it’s not hard to count it in 4/4 as you play it. It’s just notation display that’s 6/8. Realizing that opens up a world of style possibilities to mix any 4/4 styles with 6/8 or 12/8.
Jazz swing music is actually 6/8 or 12/8, it is just by convention it is notated in 4/4 with a marking saying the eighth notes are triplets.
A bar of 6/8 has 6 beats strictly speaking. But you group them in threes, so then it has two groups of triplets. You can put a chord in each of those.
Load up some jig styles and load the songdemo for them and see many examples of how this works.
I understand this and I have loaded a jig style (c-clancy)......so, why did you mention "the first and fourth triplets in 6/8" in your first reply??
Like I said before, I have got the playback timing correct by setting the time sig to 2/4 BUT now the chords in the second half of the bar/measure are greyed out in the main window and completely missing from the leadsheet printout.
To put it another way: 2/4 gets me two triplets in each bar 4/4 gives me four triplets, which I do not want.
I want two triplets and two (different) chords per bar. There must be a way of doing this or do I have to go back to pen and paper?!
I have looked at macnamaras band (zz_irish.sty). It has the same issues as c_clancy.sty. Labelled as 6/8 but displays 4/4 and sounds four triplets per bar, i.e actually 12/8.
I need to be able to change chord every triplet in certain parts of the song.
to recap and paraphrase: how do I get a triplet style like zzirish and c_clancy to play two triplets per bar (measure) and have two chords per bar. i.e. a chord change every triplet
What it appears that you're asking is for Band-in-a-Box to print notation exactly as you want it to appear. If I am wrong, please correct me as I admit I do not have a clear understanding of your intent.
If my understanding is correct then what you are wanting the program to do may not currently be possible. The only way to find out for sure is to continue substituting styles, regenerating and looking at test printouts.
The issue is the primary goal of the Band-in-a-Box program is song arrangement. The program is not as full featured when it comes to printing out notation.
You may find it easier to arrange songs in Band-in-a-Box and save the song as a midi, MusicXML or ABC Notation file and then import the file into a notation program such as +++ Forte +++ or +++ MuseScore +++ .
to recap and paraphrase: how do I get a triplet style like zzirish and c_clancy to play two triplets per bar (measure) and have two chords per bar. i.e. a chord change every triplet
Hi ricobasso,
In the 2/4 bars, if you want to get one chord on each tripet, use a comma between the chords.
e.g. entering C,F will put C on beat 1 and F on beat 2.
Alternatively, right-click on the chord sheet and open "Chord Settings", this will also allow chord entry on individual beats.
Over the years, I've found that 12/8 styles work pretty well as 6/8 styles. The main difference is that in 12/8 there are four dotted 1/4 note beats with rhythmic strengths of (S)trong (W)eak (M)edium (W)eak (i.e. it's a 4/4 time based on triplets). A 6/8 time signature, on the other hand, has (S)-(W) beats. The (M) beat of 12/8 (i/e beat 3) often doesn't sound all that different to the first (S) beat of 12/8 or 6/8.
Also, given that in a great deal of music, bars are often paired in a Strong/Medium grouping, a 12/8 feel can quite easily come across as 6/8.
Quote:
An example of this (S)-(M) bar grouping is found in the opening bars of Mozart's 40th Symphony. While this is in 2/4, the bar groupings go |(S)|M)|S)|(M)| and give a 4/4 feel.
In other words, it's worth trying 12/8 styles because it's possible that they will work for 6/8.
To get the notation in 12/8 to show as 6/8 in print-outs, there is a button in "Notation Editor" that modifies the display to do this. (See the image below.)
Hope that this, in addition to Jim's fine advice above, helps.
In the 2/4 bars, if you want to get one chord on each tripet, use a comma between the chords.
hello Noel and thanks for taking the time to reply. I must be missing something because what you describe above does not work for me.
e.g. I load up ZZIRISH.sty and change the time sig to 2/4 for all bars. The indicated time sig in the top banner does not change from 4/4 but all the bars now have a red underline. If I enter "C,F" it just occupies the first half of the bar. If I "enter C, enter F", the F goes into the second half of the bar but it is greyed out and does not play.
thinks...........Eureka!!!
Maybe, just maybe, I get it. BIAB is actually playing only the first half of each bar while leaving the display showing the full 4 beats/triplets. Well!! What a daft way of doing it and how confusing!!!
Last edited by ricobasso; 10/31/1911:24 PM. Reason: lighbulb emoji dispalyed as a url
Another niggle. If I select 6/8 in the leadsheet window, the original 4/4 or 2/4 does not change until I close and re-open the leadsheet window. Then the 6/8 is displayed twice, before and after the repeat barlines!! Intented or a bug?
What you see as 'bars' on the chord sheet are actually cells - like in Excel. It is the time signature that determines how much of a cell is used.
Each cell has the potential to contain 4 beats. This means that cells align with bars in 4/4 time. In 2/4 time, though, only beats 1 and 2 of the cell are needed. This is why any chord after beat 2 will be greyed out.
Similarly, in 3/4 only beats 1, 2 and 3 are required and so if a chord is placed on beat 4 in 3/4, it will be greyed out.
I'm not sure if this is a bug or not. Would you mind posting a screen shot of the problem so that I can see it?
That's definitely a bug. I'll pass it onto the developers and reference this thread so that they can see the problem.
To access the "File Manager" to upload graphics, it's necessary to "Switch to full reply screen" -- the button is directly beneath the "Quick Reply" window.
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.