Loc: Melbourne, Australia
Welcome to the forums.
This can probably best be achieved by changing Styles at the correct locations within the song.
Start by choosing the 6/8 style for your song. Select the bar that the chorus starts, press function key <F5> (or right-click and select Bar Settings), and select a 4/4 style from the .STY button option.
Repeat when you need to revert to 6/8 if it's further along in the song.
Loc: Marysville, Mi. USA
FWIW I'd use Realband for this. It lets the same style be used over different time signatures better than BiaB in my opinion. Including the use of Time Signatures not even allowed in BiaB (7/4 etc). You wouldn't need to change styles, just change the time sig for the desired bar(s) and change it back to original after that section, then regenerate.
just a thought YMMV depending on the style.
Edited by rharv (05/04/1907:39 AM)
Make your sound your own!
a 6/8 style in 4/4 was giving me 12/8 so...Have got the playback timing correct by setting the time sig to 2/4 BUT now the chords in the second half of the bar/measure are missing in the leadsheet?!? Grrrrrrrrrrrr
Leave it in 4/4. Then open the style picker and type words in the filter like “Celtic” or “6/8” “12/8” etc and choose a style that fits.
You will then enter up to 4 chords per 4/4 bar, with each bar equivalent to two bars of 6/8.
The notation will show in 4/4, but there is a setting on the notation to switch the display to 6/8, so it looks just like your printed notation books.
The only thing you can’t do is enter chords on different triplets, just the first and fourth triplets of the 6/8 bar.
If musicians are playing Macnamaras Band, they don’t count it in in 6/8 and it’s not hard to count it in 4/4 as you play it. It’s just notation display that’s 6/8. Realizing that opens up a world of style possibilities to mix any 4/4 styles with 6/8 or 12/8.
Jazz swing music is actually 6/8 or 12/8, it is just by convention it is notated in 4/4 with a marking saying the eighth notes are triplets.
Have Fun! Peter Gannon PG Music Inc.
A bar of 6/8 has 6 beats strictly speaking. But you group them in threes, so then it has two groups of triplets. You can put a chord in each of those.
Load up some jig styles and load the songdemo for them and see many examples of how this works.
I understand this and I have loaded a jig style (c-clancy)......so, why did you mention "the first and fourth triplets in 6/8" in your first reply??
Like I said before, I have got the playback timing correct by setting the time sig to 2/4 BUT now the chords in the second half of the bar/measure are greyed out in the main window and completely missing from the leadsheet printout.
To put it another way: 2/4 gets me two triplets in each bar 4/4 gives me four triplets, which I do not want.
I want two triplets and two (different) chords per bar. There must be a way of doing this or do I have to go back to pen and paper?!
Loc: Winston-Salem, NC USA
What it appears that you're asking is for Band-in-a-Box to print notation exactly as you want it to appear. If I am wrong, please correct me as I admit I do not have a clear understanding of your intent.
If my understanding is correct then what you are wanting the program to do may not currently be possible. The only way to find out for sure is to continue substituting styles, regenerating and looking at test printouts.
The issue is the primary goal of the Band-in-a-Box program is song arrangement. The program is not as full featured when it comes to printing out notation.
You may find it easier to arrange songs in Band-in-a-Box and save the song as a midi, MusicXML or ABC Notation file and then import the file into a notation program such as +++ Forte +++ or +++ MuseScore +++ .
to recap and paraphrase: how do I get a triplet style like zzirish and c_clancy to play two triplets per bar (measure) and have two chords per bar. i.e. a chord change every triplet
In the 2/4 bars, if you want to get one chord on each tripet, use a comma between the chords.
e.g. entering C,F will put C on beat 1 and F on beat 2.
Alternatively, right-click on the chord sheet and open "Chord Settings", this will also allow chord entry on individual beats.
Over the years, I've found that 12/8 styles work pretty well as 6/8 styles. The main difference is that in 12/8 there are four dotted 1/4 note beats with rhythmic strengths of (S)trong (W)eak (M)edium (W)eak (i.e. it's a 4/4 time based on triplets). A 6/8 time signature, on the other hand, has (S)-(W) beats. The (M) beat of 12/8 (i/e beat 3) often doesn't sound all that different to the first (S) beat of 12/8 or 6/8.
Also, given that in a great deal of music, bars are often paired in a Strong/Medium grouping, a 12/8 feel can quite easily come across as 6/8.
An example of this (S)-(M) bar grouping is found in the opening bars of Mozart's 40th Symphony. While this is in 2/4, the bar groupings go |(S)|M)|S)|(M)| and give a 4/4 feel.
In the 2/4 bars, if you want to get one chord on each tripet, use a comma between the chords.
hello Noel and thanks for taking the time to reply. I must be missing something because what you describe above does not work for me.
e.g. I load up ZZIRISH.sty and change the time sig to 2/4 for all bars. The indicated time sig in the top banner does not change from 4/4 but all the bars now have a red underline. If I enter "C,F" it just occupies the first half of the bar. If I "enter C, enter F", the F goes into the second half of the bar but it is greyed out and does not play.
Maybe, just maybe, I get it. BIAB is actually playing only the first half of each bar while leaving the display showing the full 4 beats/triplets. Well!! What a daft way of doing it and how confusing!!!
Edited by ricobasso (11/01/1902:24 AM) Edit Reason: lighbulb emoji dispalyed as a url
Another niggle. If I select 6/8 in the leadsheet window, the original 4/4 or 2/4 does not change until I close and re-open the leadsheet window. Then the 6/8 is displayed twice, before and after the repeat barlines!! Intented or a bug?
What you see as 'bars' on the chord sheet are actually cells - like in Excel. It is the time signature that determines how much of a cell is used.
Each cell has the potential to contain 4 beats. This means that cells align with bars in 4/4 time. In 2/4 time, though, only beats 1 and 2 of the cell are needed. This is why any chord after beat 2 will be greyed out.
Similarly, in 3/4 only beats 1, 2 and 3 are required and so if a chord is placed on beat 4 in 3/4, it will be greyed out.
I'm not sure if this is a bug or not. Would you mind posting a screen shot of the problem so that I can see it?
#TipTuesday - The Band-in-a-Box® 2020 Feature Browser!
Don't underestimate the power of the Feature Browser added with Band-in-a-Box® 2020! This is a GREAT resource when you "know that you knew a feature" but just can't quite remember how to find it!
Simply click on the [?] at the top of the program (near the Mixer on the right) to launch this feature. From there, simply type in your query, or choose from the long list that appears in the Feature Browser window. If you're typing it in, you'll see that list change to only show the results that could fit your search - once you find what you're looking for, you can read more about it when you choose [Manual], if there's a video for the feature you can choose [Video] to view it, OR - if you don't need to read about the feature and just want to USE it, choose [Do it] and you're all set!
Watch this new feature in action when you jump to the subject in our New Features video:
Did you wait too long to purchase flowers, a card, or book a restaurant for Valentine's Day? Or, maybe material gifts just aren't your thing?
Why not whip together a song in Band-in-a-Box? It's as easy as typing in some chords, choosing a style, and pressing play!
Or, take it a step further with the help of the Audio Chord Wizard and our StylePicker Song Titles Browser feature!
-Use the Audio Chord Wizard to analyze their favorite song and provide you with the chord progression
-Take that chord progression and start a new project in Band-in-a-Box (choose "Erase the Audio WAV file in BB" | Enable style)
-Head to the StylePicker window, search for a style for that song using the "Song Titles Browser" Feature (top right)
-Choose from the list provided
But, what if you're unable to round up your crew? That's where Band-in-a-Box® comes in!
There are more than 1,100 Guitar RealTracks available in Sets 1-352 by over 50 RealTracks Artists! Jam along with any of them when you create your own song using Guitar RealTracks, or play one of the demo songs for any Guitar you choose in the RealTracks picker dialog - simply choose your Guitar and click on the [Song Demo...] button within that window.
OR take it even farther when you head to the Soloist within Band-in-a-Box® and choose "Trade" when generating a Guitar Soloist track - choose between 2, 4, or 8 bars!
Pressing the [Bar] button or f5 while in the Chords Window of RealBand brings up the Settings for Bar for that song.
What can you do in Bar Settings?
-RealTracks Changes (opens a new window)
-Access the UserTracks Development Settings
-assign bars to repeat
-Reset - All Bars or Current Bar
Right-click on any bar within Band-in-a-Box®, and you'll gain access to the Bar Settings for your song! (also accessed by choosing "Settings for Current Bar" within the Edit menu of the program, or clicking f5)
What can you do within this window?
-Edit the number of beats per bar
-Key Signature changes
-volume changes for each track (Bass, Piano, Drums, etc)
-MIDI Patch Changes
-Harmony Changes (choose which bar & beat!)
-access to UserTracks Development
-Clear the Style
-Access to RealDrums features (including Clearing the RealDrums)
-change the RealTracks at selected bar
-Reset ALL the bars or the selected bar
-Access Print Summary of Bar Settings
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
Hours of operation are from 10:00AM to 4:00PM PST (GMT -8) Monday thru Friday. (Please note:
Tech Support is not available on weekends or Holidays.) You can also send us your technical
support questions via fax or email.