Previous Thread
Index
Next Thread
Print Thread
Go To
Page 1 of 2 1 2
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Ok... I admit probably a bit challenging. I just thought it was interesting concept.

Imagine this workflow. Select a few bars somewhere in the middle of arrangement and drag them directly to DAW, so they fall in the right spot in timeline as individual tracks (centered and dry), but just those bars that were selected, nothing else. Sort of building block concept.

If you are still reading, here is another thought. If "bar freeze" comes to BIAB, would be useful if it can be saved as a "block" with possibility to re-shuffle these blocks around in same arrangement without losing "generation" with which they got frozen.... and ability to drag just these "blocks" to DAW so they fall as individual tracks.

Or even go further and save these blocks as a file, with .fbb extension (frozen bar block), so it can be used in other arrangements as a whole block.

Probably too much "requests". I just thought of putting it down before I forget smile



Recently Cakewalk introduced a variant of arranger track. I have not played with it yet, but if I understood Cakewalk's feature correctly, this "drag bar"concept could be a good candidate for it.

Band-in-a-Box Wishlist
Joined: Jun 2012
Posts: 20,299
Veteran
Offline
Veteran
Joined: Jun 2012
Posts: 20,299
I think I understand the concept. One thing to keep in mind is that my understanding is that RealTracks are musical phrases played over several bars (2, 4, etc), maybe more, maybe less. So if a RealTrack phrase is 8 bars long, and you only want to keep bars 3 & 4, it's probably not going to be possible to 'bar freeze' just those bars.

Yes, saving as a 'block' which is made up of multiple bars could work.

However, I am only speculating on the operation here. I have no absolute knowledge of the internal methods used by the program.

Regardless, the concept is not without merit.


BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Videotrack,
yes, I think that this is the main challenge, to have "bar freeze" in general, so they (freezes) transition smoothly into other parts of arrangement. But probably consecutive sections of composition can be done as frozen blocks, with "tails"...

Band-in-a-Box Wishlist
Joined: Dec 2003
Posts: 23,142
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 23,142
Originally Posted By: VideoTrack
I think I understand the concept. One thing to keep in mind is that my understanding is that RealTracks are musical phrases played over several bars (2, 4, etc), maybe more, maybe less. So if a RealTrack phrase is 8 bars long, and you only want to keep bars 3 & 4, it's probably not going to be possible to 'bar freeze' just those bars.

Yes, saving as a 'block' which is made up of multiple bars could work.

However, I am only speculating on the operation here. I have no absolute knowledge of the internal methods used by the program.

Regardless, the concept is not without merit.


Only speculation here also but if any measure could be cut/sliced at the zero point in the audio wav the it would work. Many DAWs can do this.


Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box Wishlist
Joined: Aug 2011
Posts: 10,791
Veteran
Offline
Veteran
Joined: Aug 2011
Posts: 10,791
RustySpoon#,

Are you familiar with a Band-in-a-Box feature called "Song Form"? Song Form lets you define bars into blocks and then arrange the song by moving, copying or even deleting blocks.

While it won't help move blocks between Band-in-a-Box and a DAW it may help get the tracks set up like you want so you can quickly export arrangements.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Clipboard01.jpg (186.44 KB, 175 downloads)
Tools > Song Form > Song Form Dialog.

Jim Fogle - 2025 BiaB (Build 1128) RB (Build 5) - Ultra+ PAK
DAWs: Cakewalk by BandLab (CbB) - Standalone: Zoom MRS-8
Laptop: i3 Win 10, 8GB ram 500GB HDD
Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD
Music at: https://fogle622.wix.com/fogle622-audio-home
Band-in-a-Box Wishlist
Joined: Feb 2015
Posts: 7,954
P
Veteran
Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
Quote:
Imagine this workflow. Select a few bars somewhere in the middle of arrangement and drag them directly to DAW, so they fall in the right spot in timeline as individual tracks (centered and dry), but just those bars that were selected, nothing else. Sort of building block concept.

You could even have another instance of Biab with different instruments and drag the same section under the other tracks in the DAW.
You could select an extra bar at the start/end this will give some adjust in the DAW to merge better.
In Reaper you can have the chord regions with different colors.
Reaper has a region player that will play any selected region in any order you like. You can render the regions selected.
Reaper Extensions > Region Playlist

I suggested some time back to have these options in the Audio > Export Song As Audio File.. they would be helpful in the + DROP option.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Dry-Flat-Center.png (4.9 KB, 166 downloads)
Biab-Drag-Bars-Multi-Tracks.gif (431.96 KB, 220 downloads)
Biab-Drag-Bars-Multi-Tracks2.gif (282.43 KB, 166 downloads)
Biab-Drag-Bars-Multi-Tracks3.gif (444.3 KB, 143 downloads)
Band-in-a-Box Wishlist
Joined: Feb 2015
Posts: 7,954
P
Veteran
Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
Reaper will import the region chords from the BiabPlugin or musicxml or BB Chord Output Midi or Midi Markers.
The regions can be copied or moved and added to any order in the region playlist to quickly preview any arrangement with smooth transitions during playback.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Reaper-Biab-Sections-Playlist.png (205.01 KB, 138 downloads)
Band-in-a-Box Wishlist
Joined: Apr 2013
Posts: 8,666
C
Veteran
Offline
Veteran
C
Joined: Apr 2013
Posts: 8,666
Selecting a few bars somewhere in the middle of arrangement and sending them to a DAW requires nothing more than exporting WAV audio. Can you explain what the issue you're having so I can better understand your wish? If it's exporting small section or exporting audio, BIAB can do both of those tasks. There's also already a procedure to create smooth transitions.

Because BIAB operates as a virtual studio, there's no sound, midi or RealTracks audio until you render, generate or export it from a virtual track. These virtual instruments don't exist in any physical sense. On a BIAB channel, they are simply a set of instructions stored on the computer until each time you hit Play. Each time Play is hit, the instructions are executed with any changes, additions, mutes, fades, gain changes, unmute, panning, volume and effects. This is all digital with no effect or degradation to any audio that's ultimately rendered.


BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Pipeline,
yes in theory what you showed works. I am on Cakewalk, but process is similar. There are numerous issues with that approach. The biggest one is that sections are simply chopped off, they will not fall smoothly into the project because they lack, what Mario above mentioned, -"zero point" cut and also any tails it might have. So at the end you still end up doing a lot of tedious work on the clips. There is more time wasted importing sections through DAW plugin and polishing ends compared to exporting complete song WAVs (with tails, etc.) and importing them to DAW

----
Charlie,
Most things I mentioned above. Other aspect, which I feel is our ongoing conversation is ergonomics / design, the A->B path smile So to make my point more clear, I suggest you download Chordpulse trial and see if you can figure it out in 5 minutes. I did. It is a tiny arranger program that came out 10 years ago. This is not to compare it with BIAB, but to clarify what I mean by good design, ergonomics, pleasant appearance, doing complex things - the easy way (for example moving entire blocks around)! I believe Jim. F. likes that program too smile So to relate to initial request and directly answer your question. Yes, what I "wish" for is doable "as is", but not intuitively, not ergonomically and will take more time and many more steps in making arrangement than the workflow I am after. When trying to give a fresh look at BIAB features that relate to this approach, I stumble on the same rakes as I did initially when I explored them first time. In my view they are not complete and not streamlined with process of assembling/arranging basic blocks.

I understand, that initial request is probably a bit vague and most importantly, features that are in place would have to be significantly modified in order to achieve this. However going back to same mantra, I feel that the only true and clear workaround is opening more mixer channels. So you keep all your BIAB tracks, bits and pieces in one place and in one BIAB project, changeable within that project.

Band-in-a-Box Wishlist
Joined: Apr 2013
Posts: 8,666
C
Veteran
Offline
Veteran
C
Joined: Apr 2013
Posts: 8,666
"...sections are simply chopped off, they will not fall smoothly into the project because they lack, what Mario above mentioned, -"zero point" cut and also any tails it might have."

and

"... saving and moving 'Blocks'

with

"I feel that the only true and clear workaround is opening more mixer channels."


RealBand is the immediate, intuitive, ergonomic and logical answer here. I can assure you with unquestionable certainty that adding more mixer channels to the BIAB Mixer will not solve your workflow issue. Regeneration, frozen tracks, more mixer tracks, comping tracks, moving block sections, audio editing, all these features currently exist in BIAB "as is". As you acknowledge, in their current state, they are not intuitive or ergonomic and would have to be significantly modified to achieve being more intuitive and ergonomic and which would essentially turn BIAB into RealBand.


BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Band-in-a-Box Wishlist
Joined: Jul 2000
Posts: 26,991
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 26,991
I would be ok with essentially turning BIAB into RealBand.


BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Charlie,
" I can assure you with unquestionable certainty that adding more mixer channels to the BIAB Mixer will not solve your workflow issue."

I assure you 100%, it will!! - 16 Minimum, for RT's or MIDI, as most of arrangers had/have.


As I mentioned in other post in our conversation, I will try it again with slightly different wording. I wish not to learn the software which I feel does not have a solid future.
There are fantastic free and very inexpensive DAWs that will outbeat RB in 90% of features and workflow. Why re-invent the wheel? As one member noted earlier, RB should be kept as Legacy software...running., and all the resources freed should be put behind products that could and should be improved and developed further. I am 100% behind that.

Also..Wish is a wish. It is not a cry for a workaround smile

Matt,
"I would be ok with essentially turning BIAB into RealBand."
+1

I too suggested that once but was met with shield and sword. smile Yes, essentially I would love to have "some" features of RB in BIAB which are missing, losing the rest 80%., but I guess before that could be done, BIAB has to be "ready" for such changes.

Band-in-a-Box Wishlist
Joined: Dec 2003
Posts: 23,142
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 23,142
FWIW I think the emphasis should be on the VST. Adding features from BiaB and RB to the VST would be extremely valuable. That and improve the workflow and GUI would make it an universal product, i.e. both MAC and PC. It could make BiaB and RB obsolete. YMMV


Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Mario,
I think there should be a standalone program and a VST. (NI, Halion etc.)
I am not a programmer, and most certainly do not know if there is a plan of VST plugin to be worked out as a full featured standalone...
Lets assume it is (or isn't), same story remains... of 16 or more available channels for RT or MIDI smile

Band-in-a-Box Wishlist
Joined: Jun 2012
Posts: 3,790
J
Veteran
Offline
Veteran
J
Joined: Jun 2012
Posts: 3,790
Originally Posted By: Charlie Fogle
RealBand is the immediate, intuitive, ergonomic and logical answer here.

RealBand is not even remotely intuitive or ergonomic!

Band-in-a-Box Wishlist
Joined: Dec 2003
Posts: 23,142
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 23,142
Originally Posted By: Rustyspoon#
Mario,
I think there should be a standalone program and a VST. (NI, Halion etc.)
I am not a programmer, and most certainly do not know if there is a plan of VST plugin to be worked out as a full featured standalone...
Lets assume it is (or isn't), same story remains... of 16 or more available channels for RT or MIDI smile


As I have stated many times over many years that I want all 16 channels opened up to the user so yes I am in your camp.


Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box Wishlist
Joined: Feb 2015
Posts: 7,954
P
Veteran
Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
I don't want to knock ANY ideas, I suggest ways it could be done or find a workaround until it's done (or not) but all these things are why the BiabPlugin was made. It would help if you could suggest features in the BiabPlugin forum that's you thinks needed or if you need the complexities of Biab then maybe a VST to sync Biab as a slave to your DAW.
There was talk for yearssss about a new reprogrammed 64bit RealBand that works like Biab generating to RAM with more tracks.
That never came around so ReaTrak was made to integrate Biab (and now the Plugin) with Reaper as the scripting allows you to add features "today" without going to the wishing well year after year.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Reaper-Zero-Point.png (10.18 KB, 73 downloads)
Band-in-a-Box Wishlist
Joined: Feb 2015
Posts: 7,954
P
Veteran
Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
Here's another example of what can be done with the Plugin/s.
If the Plugin had an option to start play when the DAW reached bar 256, so after it plays bar 255 in the first instance it will start play of bar 1 in the second instance with the rest of the song (that has this option checked). You could even add 255 to the bar numbers in instance 2 giving you the actual same bar numbers as the DAW.

Here is an example video with 2 Plugins, when the first on the left gets to bar 256 (17) then the second plugin starts on bar 256 (17) and continues to play seamlessly.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Band-in-a-Box Wishlist
Joined: Mar 2018
Posts: 6,732
Veteran
OP Offline
Veteran
Joined: Mar 2018
Posts: 6,732
Pipeline,
why is that you are not working next door to Adar?...in mask...

Ok, plugin is another beast. Per your recommendation, I tried it. Fun toy, and very well might have uses for some folks. But being so stripped, has no use to me at this time. I am afraid I will sound too negative if I start expressing my opinions about it smile The bottom line, I do see appeal and usefulness in it for some (if not half of future) users so I will keep it to myself for now.

My preferred way of doing things is sequential. Idea->BIAB->DAW->synths, instruments,vocals->Mix. Not jumping from place to place if absolutely not needed. I guess, unless some huge steps are taken in plugin development I will stick to BIAB. I do wish BIAB would get modernized and cleaned a little + biggest request of more mixer tracks so whole BIAB arrangement can stay in single BIAB project until ready for export to DAW.

P.S. Hey, I really do not want to sound like a cry baby. I can totally get away with how I do things, just sharing my feedback / wishes.

Band-in-a-Box Wishlist
Joined: Dec 2003
Posts: 23,142
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 23,142
Originally Posted By: Rustyspoon#
Pipeline,
why is that you are not working next door to Adar?...in mask...

Ok, plugin is another beast. Per your recommendation, I tried it. Fun toy, and very well might have uses for some folks. But being so stripped, has no use to me at this time. I am afraid I will sound too negative if I start expressing my opinions about it smile The bottom line, I do see appeal and usefulness in it for some (if not half of future) users so I will keep it to myself for now.


I agree. The only thing I use the vst for is to copy the chords over to my DAW.

Originally Posted By: Rustyspoon#

My preferred way of doing things is sequential. Idea->BIAB->DAW->synths, instruments,vocals->Mix. Not jumping from place to place if absolutely not needed. I guess, unless some huge steps are taken in plugin development I will stick to BIAB. I do wish BIAB would get modernized and cleaned a little + biggest request of more mixer tracks so whole BIAB arrangement can stay in single BIAB project until ready for export to DAW.

P.S. Hey, I really do not want to sound like a cry baby. I can totally get away with how I do things, just sharing my feedback / wishes.


My work flow is identical to yours.


Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Previous Thread
Next Thread
Go To
Page 1 of 2 1 2

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support

Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.

Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support

Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins

Join the conversation on our forum.

Band-in-a-Box 2025 for Mac Videos

With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.

From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.

Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!

Band-in-a-Box 2025 for Mac is Here!

Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!

Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.

2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.

If you have any questions, feel free to connect with us directly—we’re here to help!

Band-in-a-Box 2025 Italian Version is Here!

Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.

Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.

Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano

Band-in-a-Box 2025 French Version is Here!

Bonjour à tous,

Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music

Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:

BIAB 2025 - francisation
RealBand 2025 - francisation

Voilà, enjoy!

Band-in-a-Box 2025 German Version is Here!

Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!

Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!

Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:

https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025.exe
https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025RB.exe

Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!

Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.

Stay up to date—get the latest update now!

Forum Statistics
Forums58
Topics84,187
Posts776,185
Members39,595
Most Online25,754
Jan 24th, 2025
Newest Members
gestes, TSIRY10, Albertcolin, Snow, Siggi D
39,594 Registered Users
Top Posters(30 Days)
MarioD 156
zedd 113
DC Ron 82
WaoBand 81
rsdean 79
nonchai 71
Today's Birthdays
Rusty Wilson
Powered by UBB.threads™ PHP Forum Software 7.7.5