Just had my first go at making my first Kontakt instrument. I had a few Rhodes piano samples so set about mapping them to a keyboard in Kontakt and making an instrument (Kontakt .nkt file) I squeezed another octave at each end, using the lowest and highest sample I had C1and C4 and stretching, Still sounds surprisingly good. Have uploaded to my boxnet for you as a 7-Zip file. Just unzip to your desktop or wherever you keep you Kontakt stuff. You will get 1 folder containing the nkt and a sub folder of samples. You will have to use file load in Kontakt as there is no library file Or just drag the .nkt file into Kontakt from it’s folder. Warning do not separate or move the sample folder from the nkt file keep them together or you will get the samples not found error. It’s not the best Rhodes Piano in the world but this was more to do with me playing around, but it is quite playable.
Mike, you did a fantastic job on this! I like the fact that it is a raw sound, sweet but with no built in effects. I like sounds like that.
For others, this is a sweet sounding Rhodes. If you don't have a Rhodes or even have a number of them you should DL this beauty. If you have the full version of Kontakt adding a plate reverb and a chorus gives you a really sweet sound.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thank you Mario, for your useful comments and suggestions. Pleased you found it useable. Thank you for taking the time to post, I appreciate it. I noticed I have quite a few downloads but not replies, just the way it often is on forums. Thanks again. Mike
Hi Mike, this sounds really nice. I also like your graphics.
Had a little play with it. I added some tremolo and also a little reverb and it came up really sweet. But, that was to my taste not at all an issue with the initial sound.
Tony
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
As before keep everything in the same folder there is more this time due to the resources needed to accomplish this.
There are two pages of Controls selectable. Tremolo and Reverb Delay and Chorus With key switches to turn them on and off (you need your Kontakt keyboard display tuned on) there are on screen buttons as well. Also useful if working in Piano role view in you DAW.
I have also changed the sample mapping a bit leaving out the C2 sample as it was a bit aggressive and stretching the ones either side to fill the gap that is G1 and E2.
I especially want to say, A big thank you to Forum member Teunis who wrote the Scripts and resources, knob images etc. for this gui. I learnt a lot from him as well along the way, and appreciate his help.
Please note you will need Kontakt 5.0 or higher to load my instrument files. Please let me know how you get on. Have fun. Mike
Mike, you made some very nice improvements in this Rhodes! The chorus and tremolo are perfect. The delay is very nice while the reverb is nice, however I have better reverb plug-ins. That is not a knock down of it as the reverb is decent as will work in many cases.
This is a much improved Rhodes. Thanx for sharing it.
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Hi Mario, I used the legacy reverb (and other plugins) because I wasn’t sure what the older versions of Kontakt had. Adding the convolution Reverb would have involved extra scripting (To select the room or whatever) and also I would need to store the impulses to ensure they were available.
This can be done. The used scripting was done in a few spare hours. It was a fun exercise for me mainly to try the tremolo.
Even the delay is legacy. I found there is a little more complexity in Replika the legacy works simply and seems fine.
The chorus was as it came.
I didn’t add Vibrato. Well does a piano have vibrato. I was thinking about a Tone Control but that is another issue.
Using the notes (the original C2 for example) which appear to have been hit harder maybe could be used to create a Velocity layer. But that is just a thought.
Tony
Last edited by Teunis; 07/22/2001:50 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
Hi all Spent all this time playing with it, so thought I had better play it lol. Well I got to try and play this as a piano this afternoon and to my Horror I found that it was out of tune with itself across the octaves. This meant it was impossible to play as a piano with LH chords in one octave and a RH melody in a higher octave. After much testing and trying I decided that the samples where not quite in tune so the only option was to remove some samples. In fact I finished up for best results using the C3 sample rooted at C3 and stretched up to C6 an down to C0 This gives a nice even sample tone and tuning across the range. I have left the other samples in the resources folder if any one wants to remap their own version, Sorry but you will need to re download from box net. I have done both the original simple version and the one With knobs on so if you are keeping both the new in tuned versions are now ready on the old links. The new versions went live about 6.30pm Bst Thurs 24 Aug.
Sorry for the trouble but could not leave it like that it was as much good as a chocolate teapot.
I purposely created this version in Kompakt 5.0 to make it of use to as many folks as possible as Kontakt instruments are not downward compatible from the version they were created in. However I have tried it in Kompakt 6 and it works fine.
Hi Mike, fear not this is a very easy thing to fix. In the map editor is an area for adjusting the tuning on the right hand side just above the zones. Put a tuner into the output and adjust away. If you like I can do this this afternoon my time. It’ll only take a few minutes.
Sent you a PM with the link to the tuned samples. Instruction in the PM.
Tony
Originally Posted By: Mike Head
Hi all Spent all this time playing with it, so thought I had better play it lol. Well I got to try and play this as a piano this afternoon and to my Horror I found that it was out of tune with itself across the octaves. This meant it was impossible to play as a piano with LH chords in one octave and a RH melody in a higher octave. After much testing and trying I decided that the samples where not quite in tune so the only option was to remove some samples. In fact I finished up for best results using the C3 sample rooted at C3 and stretched up to C6 an down to C0 This gives a nice even sample tone and tuning across the range. I have left the other samples in the resources folder if any one wants to remap their own version, Sorry but you will need to re download from box net. I have done both the original simple version and the one With knobs on so if you are keeping both the new in tuned versions are now ready on the old links. The new versions went live about 11pm Bst Thurs 23 Aug.
Sorry for the trouble but could not leave it like that it was as much good as a chocolate teapot.
I purposely created this version in Kompakt 5.0 to make it of use to as many folks as possible as Kontakt instruments are not downward compatible from the version they were created in. However I have tried it in Kompakt 6 and it works fine.
Have fun And let me know how it goes. Mike
Last edited by Teunis; 07/23/2007:13 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
I have today uploaded yet another version of Rusty Rhodes. With help from Teunis once again who has kindly retuned a multi sample version, so that the octaves across the keyboard are in tune with each other. You will recall I had trouble with the first version not being in tune across the keyboard, and having to reduce to a single stretched sample.
I have left the latest working versions there for any one that may prefer them from this new download So in fact you can now have 3 working versions if you want. Here is the link for the New Tuned multi sample version.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.