reading on the net bout this topic. maybe an announcement this month ?? anyone got info. ?? processor speed etc etc. it would be interesting if a mac mini arm based was priced for budget buyers. 4 ghz processor plus ssd for 700 bucks say. with thunderbolt etc. would be a big sales item imho.
the problem is budget buyers can buy xeon desktops (top intel processor.) based refurbs with win 7 or 10 on , which a user can stuff in multiple ssd's for around 6 or 700 bucks. these xeons will run a slew of traks and plug ins . trouble is these powerfull xeon refurbs sell fast.
anyhoo is there an apple announcement in november ??
We have one of those ARM development systems in the office (Mac Mini) and we have been doing some testing on it. Can't say a lot about it as I haven't used it myself, but from what I hear BB 2020 is working fine on it.
simon. respect and thanks for the reply. i fully understand if you can only give so much info out. (eg an NDA in place.) but my interest is "piqued". some q's. / metrics that interest me.
1.from totally cold boot, (not sleep mode), how long to boot to desktop in secs. 2. how long in secs to boot from the desktop into biab ? 3. how long in secs to boot from the desktop into apps like garageband and logic pro ? 4. assuming a biab song 3 and a half minutes long with every trak an RT (no plug ins.) how long to export the stereo song wav , once biab is instructed to do so. 5. is everything snappy and fluid ??
pipeline. re arm macs. i'm just trying to keep an open mind. you make a valid point. i just wish apple would see the huge untapped market for affordable power machines. 10 ghz mini. lol.
my problem is i see these amazing xeon refurb deals that will blow the doors off for most project studios cos you can load them up with ssd's/ram etc. example. https://www.staples.ca/products/2980177-en-hp-refurbished-z440-workstation-gaming-desktop-35-ghz-intel-xeon-1630-v3-500-gb-hdd-256-gb-ssd-16-gb-ddr3-windows-10-pro 600 to 700 bucks. also hp and dell and lenovo have sometimes amazeing deals on refurb xeons and i7's etc on their web sites. this type of machine (as your a reaper/biab/rb user) will be superb for that daw combo, or any daw combo for little money for that matter. they also have 1 yr warranty often. just gotta test before buying. you prolly know the mainboards are "industrial quality "often , compared to normal retail fare. it amazes me that more pg users havent discovered these xeons (or i7's for that matter), and just go buy any old computer which often costs way more.
see my dilemma ??
btw. thanks for that link. interesting info. respect. oldmuso. ps pg should give you an award for your help on these forums.
pipeline. (your the man.) wait. are you saying that people are running mac os on those cheap refurb xeon beasts per your link ?? i was of the understanding people were doing that on new custom pc builds with expensive processors. (per GS forums.)
what is really odd is any refurb ive bought ive had no win problems with. my suspician is the people doing the refurb know their stuff. very fast cold boots also. that particular hp beast i linked to, i would replace the one non ssd drive with an ssd drive. so it had 2 ssd's. i think certain refurbs will take 4 ssd's, depending on config. that xeon has 8 usb 3 ports .
its amazeing. i'm seeing even under 200 buck i5 refurbs. perfectly good for running biab/rb/reaps as long as one dont go nuts with a slew of over the top cpu hogging plug ins. ie 250 traks, 250 plug ins lol.
i do like the mac mini. its cute. like the PI. i'd just like to know some performance metrics. whats your rig ?(i7/ssd ?)
btw i was reading up on slate digital. new interface, custom chip engineering ? one millisecond latency ? kinda knocked me for six. but outta my budget. it seems more sub 3 ms interfaces are starting to come out ? good times coming. whats your read on usb4 ?? wicked transfer speed.
i5 SSD 16GB SSD makes the main difference. Refurbished are fine, plenty of room in that for more drives, you can multiboot any OS on it. That will be fine for Biab.
simon. respect and thanks for the reply. i fully understand if you can only give so much info out. (eg an NDA in place.) but my interest is "piqued". some q's. / metrics that interest me.
1.from totally cold boot, (not sleep mode), how long to boot to desktop in secs. 2. how long in secs to boot from the desktop into biab ? 3. how long in secs to boot from the desktop into apps like garageband and logic pro ? 4. assuming a biab song 3 and a half minutes long with every trak an RT (no plug ins.) how long to export the stereo song wav , once biab is instructed to do so. 5. is everything snappy and fluid ??
respect. oldmuso.
I can't comment at all, because I haven't used it at all myself. There are a few benchmarks floating around though: https://www.iphoneincanada.ca/mac/apple-arm-powered-mac-mini-benchmark-developers/ A thing to keep in mind though is that since it's an ARM chip, any existing apps that aren't developed for ARM are gonna be running through Rosetta 2, and that can slow things down (much like Rosetta when Apple moved from PPC to Intel) as now you're having to emulate a CISC architecture on a RISC chip.
Originally Posted By: justanoldmuso
simon re dda console more respect lol.
Word!
Regarding refurb computers, every refurb I've ever bought has been well worth it. Refurb Mac computers, refurb HP desktops and laptops, refurb Lenovo, always good, and much faster and cheaper than something brand new.
Regarding USB4 for audio interfaces, I don't believe it's necessary. Companies have made sub-3ms interfaces on USB2 over a decade ago (Fireface UC as an example)! Certainly the higher data speed is good, but lets do the math - one channel at 24-bit 192khz is around 4.6mbps, and USB 2.0 is around 480mbps, so that's not an issue for a few dozen channels. Going further, at 480mbps a single 24-bit sample takes about 50 nanoseconds to transfer. USB 3.0 cuts those figures by 10, and USB 4.0 would cut it again by 8.
Realistically, you can expect USB2 to have a lot of overhead which can slow things down a little, but the big bottleneck with latency is always gonna be drivers and CPU.
simon. 1.as always spot on. nice to meet a kindred refurb spirit. cant beat them. 2.re dda. mic pre's. its fun to try and build ones own mic pre's. (on gearslutz is geekslutz forum. ) lots of vintage schems on net . i just stay away from tubes cos they scare me lol. for fun google the 5 dollar mic pre schematic. then go to gearslutz, put in 5 dollar mic pre in search. hilarious thread where it fooled some engrs in tests against expensive pre's. 3. usb4. yup good points.
simon. 1.as always spot on. nice to meet a kindred refurb spirit. cant beat them. 2.re dda. mic pre's. its fun to try and build ones own mic pre's. (on gearslutz is geekslutz forum. ) lots of vintage schems on net . i just stay away from tubes cos they scare me lol. for fun google the 5 dollar mic pre schematic. then go to gearslutz, put in 5 dollar mic pre in search. hilarious thread where it fooled some engrs in tests against expensive pre's. 3. usb4. yup good points.
best. oldmuso.
The DDA mic pre uses nearly the same chip as the 5-dollar mic pre (I think the INA217 or similar), just with a bit more filtering and a good power supply (the PSU is in my rack and does all the AC-DC conversion so the board doesn't have any 60hz AC anywhere near it).
I actually built a handful of the 5-dollar mic preamps (with the SSM2019 chip rather than the INA217, but similar enough), but rather than running from a stack of 9v batteries I built some beefy +-15v power supplies and added a switchable pad and high pass - then built them into a couple shielded enclosures (shielded with foil tape on the inside - added nearly 20db noise reduction), and eventually rackmounted a stereo pair with a fat toroidal power transformer.
We put the 4 of them up against everything we had in the studio (which included a pair of API 512C, an LA-610 MKii, an Avalon 737, a Drawmer 1960, a TL Audio CL-1, and the preamps in an SSL Duality) and - there was no winner. They were all equally good. Popular vote were that my slightly-more-than-five-dollar preamps were the most similar to the Avalon, interestingly enough!
simon. holy moly. i used to do diy. my wife says "do the dishes" lol. uber nice. yeh the thing that drove me nuts was the bi polar op amp power supplies. i think there are chips to do that now. ps did you see my latency thread and the fact slate digital under 1ms ??. outside my budget. best. oldmuso.
Thanks! The power supplies I designed for these are a fairly standard dual linear supply, from a centre tapped transformer, 7815 and 7915 regulators and an LM317 for +48v. Nothing too fancy, just trying to make them as clean as possible without introducing any switching noise. I measured EIN at around -120db, which is similar to the aforementioned Avalons and APIs.
Just saw your thread about latency, I'll have a proper look tomorrow.
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean