the best advice i was given was 'never buy plastic jack plugs'. reason being you'll step on them on your way to the stage.
having built a fair few circuits, replaced potentiometers and so on i agree being able to solder is essential.
but i also found that alongside re-soldering the connection i had to epoxy an input socket to a printed circuit board where it had bent.
hate to sound like an old fart but being able to take things apart, see how they work and work out how to fix it is disappearing as a skill with so much that gets thrown away rather than fixed.
i remember repairing a band's fender rhodes which had one dud note and being amazed at just how simple it was inside. i'd never try that with a hammond!
I’ve had a soldering iron and soldering gun almost as long as a trumpet, since age 10. Indispensable. My knowledge of electronics, including managing an electronics store, is 100% in support of my music.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
In some of the discussions about amps there was mention of some having trouble with soldering. While I am no expert I do understand how it works pretty well.
It is a pretty useful skill for anyone involved in music. It was a bit of a mystery to me until a jeweler friend of mine showed me some things.
As electronics tend to get smaller and smaller to the point you need a microscope to do repairs that has become a specialized skill to do that sort of repair.
To Bob's comment, a lot of things get tossed in the trash. It is cheaper to replace a circuit board in many cases than to repair it even if you have the skill set to troubleshoot at the component level.
Worse yet the chip you may need is no longer being made.
I have more to say on the subject but not the time at the moment.
Cheers,
Billy
New location, new environment, new music coming soon
Seize the moo-ment If you feel like you’ve herd all these cow puns before, you probably have deja-moo
This is part assembly of the printed circuit boards from a traffic signal communications system I designed and manufactured a few years ago. All of the larger components were hand soldered, but the surface mount devices were all populated with a PCB loader. We pumped out stacks of these devices.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
It's not going to be a blaster but I expect that's not what you are building it for.
Your circuit shows a single resistor to handle the gain. One thing to consider is to add a capacitor (about 6.8uf to 10uf) in series with the gain control potentiometer (one side connected to pin 8 and the other to the wiper). This should improve the regulation of the gain control, and more reliably allow you to set the gain up to about 200.
What speaker are you expecting to use on the output? It's certainly not going to produce much volume, I'm guessing about 1 Watt max. I presume that you know that already. Headphones?
Add an on/off switch also, or be prepared to keep purchasing 9V batteries
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
This is just a toy to play with. I have a lot of speakers but I will use a headset. Thanks for the on off switch tip. I was also thinking of using a power supply but it would most likely add a lot of noise. Most likely build a bass boost circuit also.
I have never really built anything other than effects peddles with transistors. This will be the first amp.
Building tube guitar amps started out late in life with zero understanding of electronics. I had my hands full trying to learn that and not kill myself...lol I have built more than 30 at this point. FYI for all you guitar players, there are things you can touch that will kill you even with the amp unplugged.
For what ever reason all those little black widgets looked totally mysterious to me. I did finally start messing around with transistor stuff. I found it frustrating because people would bring me really high end audio amps from the 1970's I could not repair because I could not get the parts.
Here is a video of a Vox T 60 I got working. This is the exact model the McCartney played in his early days – the small box, brown grill and grey panel! Vintage 1964 Vox T60 Transistor Bass Amplifier Head Top
As you can see from the video I did not know much about transistor amps. Well...even someone who understands solid state electronics may have never seen one of those old black Mullard transistors.
Wow, OC71 / OC72. They are Germanium transistors, which predate Silicon. Maybe late 1950's? Not too many of those around anymore. I don't know of any current circuit design that specifies Germanium (well not for a big handful of years). You're talking museum here...
(Incidentally, they pre-date my involvement in the industry )
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Wow, OC71 / OC72. They are Germanium transistors, which predate Silicon. Maybe late 1950's? Not too many of those around anymore. I don't know of any current circuit design that specific Germanium (well not for a big handful of years). You're talking museum here...
(Incidentally, they pre-date my involvement in the industry )
The amp was made in 1963.Who knows when the OC71 were made,
There are a few around to be had now days, old new stock I assume. There are guys using Germanium in boutique effects boxes. Pretty esoteric stuff...lol
The T-60 is a museum amp now days.
Billy
New location, new environment, new music coming soon
Seize the moo-ment If you feel like you’ve herd all these cow puns before, you probably have deja-moo
Videotrack/Billy. interesting thread. frankly high voltages scare the heck out of me. i understand there is a breed of tubes that dont need high voltages these days ?
talking of germanium transistors. heres a modern high end mic pre used in big studios that employs germanium transistors fyi.
i'm curious if its possible to build a simple low parts count mic pre xlr input fixed gain 20 db , single supply pre useing germ trannies with just a "mojo dial". and then line out. ie a simple "in line" mic pre with mojo circuit.
or maybe a custom circuit that follows this klark technic in line pre thats only 30 buks ?
There are soldering irons that plug into your car lighter. Here is a page on Amazon with stuff that will work well for less than $30.
Better than that, grab an inexpensive butane soldering iron. No batteries needed, the cheap Weller ones will run for an hour on a fill, and they'll heat better than many cheap irons. I've got a couple of them for when I'm on the road.
Originally Posted By: Bob Calver
hate to sound like an old fart but being able to take things apart, see how they work and work out how to fix it is disappearing as a skill with so much that gets thrown away rather than fixed.
That's less about us being old farts and more about how electronics are designed these days. Electronics now are not meant to be serviceable. Your average iPhone or laptop is held together with glue, uses parts that are so small even someone with perfect eyesight like me needs a magnifier, and won't work with any off the shelf replacement parts.
Originally Posted By: Matt Finley
I’ve had a soldering iron and soldering gun almost as long as a trumpet, since age 10. Indispensable. My knowledge of electronics, including managing an electronics store, is 100% in support of my music.
Since you mentioned trumpets, I repaired mine with a propane torch once. Bought it from a second hand shop for $12 with the lead pipe ripped off, just soldered it back on with the torch and it's been great ever since. Old 70's Boosey & Hawkes horn, looks rough but sounds just as rough with my playing.
Originally Posted By: VideoTrack
Originally Posted By: Matt Finley
So Trevor, you’re the one responsible for hitting nothing but red lights as I drive down the street?
Not quite. Apparently, I'm the one responsible for every one of us hitting red lights
*shakes fist from every red light*
Originally Posted By: justanoldmuso
i'm curious if its possible to build a simple low parts count mic pre xlr input fixed gain 20 db , single supply pre useing germ trannies with just a "mojo dial". and then line out. ie a simple "in line" mic pre with mojo circuit.
Germanium semiconductors are inconsistent and very temperature sensitive regarding noise and stability, that's why these Chandler preamps are expensive. Besides, you'll get more "mojo" from building a mic preamp with silicon semiconductors and a nice input transformer than by building one with entirely germanium semiconductors.
Last edited by Simon - PG Music; 04/22/2111:41 AM.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.