That's how I do it. But I also know both systems intimately so rarely need to think about "how much would that be..."
Yes, I under the concept. I find fractions pretty useless to begin with unless we are talking about very approximant measurements. A half a pie, half crazy. They have more relevance in machining, 1/2 inch but I prefer .500
The speed signs here are in MPH. The speedometer is designed to be read in MPH and yes there are some small numbers in kilometers.
I can think in miles, nautical miles, and kilometers. I have my GPS in my car set to display in kilometers because 700 meters is easier to understand than .435 miles or 87/200 and of course that would be displayed as 1/2 miles but in fact the GPS would never display that distance of 700 meters in miles to begin with.
I know visually what 13MM looks like, more or less the same as 1/2 inch. I know what 300 meters looks like, about from my house to the end of the street.
Part of my frustration is most likely related to constantly having to speak and listen in both English and Spanish and really never knowing when I must use one or the other.
I program my GPS to speak to me in French just to keep the language in my head and because I get tired of both English and Spanish...lol
I also am pretty conversant in both systems. Where it becomes problematic is when precision is needed. That requires precise conversion.
I cook in conventional USA terms...1/2 cup, two teaspoons ect. How much less trouble to have learned that in grams and milliliters.
I will vote for the metric system every time.
Billy
New location, new environment, new music coming soon
Seize the moo-ment If you feel like you’ve herd all these cow puns before, you probably have deja-moo
I remember when MLB first added 2 Canadian teams and the distance down the foul lines was metric. Toronto had 99.97 metres written on the wall in left and right. I wrote to MLB and asked them why, if Toronto said 99.97 metres that teams in the USA did not say 330 feet 7 inches. Why not round off?
Though it's still a travesty that pitchers don't bat in the American League but they do in the National League...
I am using the new 1040XTRAEZ form this year. It has just 2 lines.
1. How much did you make in 2023? 2. Send it to us.
I would prefer that the USA gets off the Imperial system and goes completely metric.
Both systems have their pros and cons, but the majority of the rest of the world is metric, so it would be much easier if we joined the world community.
And Pianobilly, I agree that decimals are better than fractions for making calculations. Two of the only common things better expressed as a fraction are 1/3 and 2/3 :-)
FWIW, those still need to use the tempo map to be correct. But I did get the reference (music) so I smiled. Go ahead and do the below tempo map in fractions <grin>
Make your sound your own! .. I do not work here, but the benefits are still awesome
As Trev said earlier, we went metric in the 1970s, but we still use a lot of "descriptive" terminology, such as "He's very tall, well over six feet" Or "the surf was big today ... well over 10 foot waves." There's two funny things I remember at the start of the introduction to the metric system. The first was a politician trying to "sell" the metric system, who said "It may be difficult at first, but stick with it. If you try to forget the imperial system, and think metric, inch by inch we'll get there."
And another person said "This is too hard ..... they should have waited until all of the old people died before introducing it."
...There's two funny things I remember at the start of the introduction to the metric system. The first was a politician trying to "sell" the metric system, who said "It may be difficult at first, but stick with it. If you try to forget the imperial system, and think metric, inch by inch we'll get there."
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
In the worthless trivia category, the reason for 12 in the Imperial system is to avoid having to deal with fractions.
That is, 12 can be evenly divided by 2, 3, 4 and 6. When you're building stuff, you don't want rounding errors to cause problems, so dealing with integers is just simpler.
Same logic with a 12 hour clock, and 360 degrees. Only with degrees, you basically get to divide by 5 without a fractional result as well.
Vulgar Fractions and Decimal Fractions never worry me. I can us them all. Yep. I can use feet and inches too, no question.
But since moving to a decimal system here a long time ago, the terms: - 12 pounds and 6 and a half ounces, - Nine and three quarter U.S. gallons, - Seventeen feet, five and three sixteenths of an inch measurements are, well, well, so unnecessarily complicated - when there is already a much easier method that has been around for such a long time.
And yes, I also already know that that 1 mile = 5,280 feet or 1,760 yards
But, using metric, I don't have to remember that 16 ounces = 1 pound. 14 pounds = 1 stone or that 2000lb = 1 'short' ton.
I only have to know that - 1000mm = 1 metre, - 1000 metres = 1km. - 1000 grams = 1 kgm. - 1000 kgm = 1 metric tonne.
Just so, so much easier.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
14 pounds = one stone...lol At least I don't have to deal with that one...lol
We do have equally arcane measurement systems.
Horses are measured in hands because they didn't have standard measuring tools in ancient societies, so they commonly used hands to measure horses; this tradition continues to the present. One hand is considered 4 inches, so a 15 hand horse is 60 inches tall.
And while we are talking about not having the proper tools. I would like for Ben Franklin to just disappear into the dust of history. Electrons flow from negative to positive not the other way around like all schematics show. Call conventional flow! I call conventional BS!!!
Billy
New location, new environment, new music coming soon
Seize the moo-ment If you feel like you’ve herd all these cow puns before, you probably have deja-moo
Engineers and technicians are trained different theories regarding the flow of electricity. One theory addresses electron movement while the other theory looks at electron hole movement. When an electron moves left to right then the electron hole moves right to left.
It's just as confusing as trying to determine who won the calculator war, Hewlett Packard (HP) with their Reverse Polish Notation (RPN) or Texas Instruments (TI) with their Standard Algebraic Notation (SAN). Engineers typically were trained to use RPN while technicians SAN. We may strive to be a classless society but mankind always finds a way to classify people.
It's just as confusing as trying to determine who won the calculator war, Hewlett Packard (HP) with their Reverse Polish Notation (RPN) or Texas Instruments (TI) with their Standard Algebraic Notation (SAN). Engineers typically were trained to use RPN while technicians SAN. We may strive to be a classless society but mankind always finds a way to classify people.
But you have to admit that both RPN and TI beat using a slide rule! You young guns can look up slide rule
I want my last spoken words to be "I hid a million dollars under the........................"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Engineers and technicians are trained different theories regarding the flow of electricity. One theory addresses electron movement while the other theory looks at electron hole movement. When an electron moves left to right then the electron hole moves right to left.
It's just as confusing as trying to determine who won the calculator war, Hewlett Packard (HP) with their Reverse Polish Notation (RPN) or Texas Instruments (TI) with their Standard Algebraic Notation (SAN). Engineers typically were trained to use RPN while technicians SAN. We may strive to be a classless society but mankind always finds a way to classify people.
I have both calculators. I use the HP for mortgage and interest calculations and the TI for engineering calculations. Actually nowadays there are so many calculators on the internet I use them as much as anything. We also have programs designed for highly specific calculations such as structural engineering.
There are all sorts of terms of measurement that are slowly going away. Feet, yards, fathoms, leagues are rapidly being replaced by meters.
An even with the best of systems many measurements are difficult at best to conceptualize. How small is a nanometer? How far is a parsec? You can not see a nanometer because it is smaller that a wave length of light.
One parsec is defined as the distance at which an arc of length one astronomical unit subtends an angle of one second of an arc .
1 parsec = 3.08 x 1016m. Say what??? OK if you say so...lol
Billy
New location, new environment, new music coming soon
Seize the moo-ment If you feel like you’ve herd all these cow puns before, you probably have deja-moo
A couple of stories about Metric/Imperial confusion.
1. I saw this on a TV programme about 20 years ago.
In the 1800s an American millionaire acquired architects plans for a French style chateau and commissioned American contractors to build it on land he had bought in the US. Unfortunately the contractors thought the measurements were inches but were actually centimetres. The resulting chateau was 2.5 times bigger than intended.
2. I came across this one while reading a biography of the actor David Niven.
He had a residence in the south of France and employed a local firm to construct a swimming pool in the grounds. His hand written instructions were in feet which they thought were metres, so the pool was about 40+ feet at the deep end.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.