Previous Thread
Index
Next Thread
Print Thread
Go To
Page 2 of 3 1 2 3
Songwriting
Joined: Dec 2006
Posts: 1,574
L
Expert
Offline
Expert
L
Joined: Dec 2006
Posts: 1,574
My guess is match BIAB in Audio properties to your audio card or change the settings on the Audio card. It should be either 41.? or 48 from memory, but they need to match.


Windows 10 Home 20H2 Build 19042.487
BIAB 2021 (Build 818)
Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor
Zoom UAC-2 (USB 3 interface-built in midi)
VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
Songwriting
Joined: Aug 2011
Posts: 10,145
Veteran
Online Happy
Veteran
Joined: Aug 2011
Posts: 10,145
If your computer recently installed a Windows update, Windows likely discretely changed the Windows Audio Control Center sampling rate to 48Khz while the Band-in-a-Box audio sampling rate remained at 44.1Khz. There are at least two ways to verify the settings. Here's one.

One way to verify audio settings (See screen shot):
1) Ctrl+E opens BiaB Preferences
2) Select Audio button to open BiaB audio settings
3) Select Audio Drivers button to open the Windows Audio Drivers device audio settings. (Note this window is device specific so your window will look different from mine).
4) Compare audio settings.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Clipboard04.jpg (194.6 KB, 120 downloads)
BiaB & Windows Audio Settings

Jim Fogle - 2024 BiaB (1111) RB (5) Ultra+ PAK
DAWs: Cakewalk by BandLab (CbB) - Standalone: Zoom MRS-8
Laptop: i3 Win 10, 8GB ram 500GB HDD
Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD
Music at: https://fogle622.wix.com/fogle622-audio-home
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Thank you so much, guys!!

Lambada, I actually have "44.1 sample rate" written on a post it note on my laptop... but I couldn't remember where to set it. **sheepish smile**

Yes, Jim, Windows DID behave badly this weekend--I went to wash the dishes and it sneaked in an update while I was distracted. Came back to shut down programs and files. **eyeroll** Honestly, this is one reason I prefer Windows 7: they don't update it anymore. But anyhow, thank you so much for the instructions. I'll fix it tonight.


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
**headdesk** The audio input buttons are grayed out and won't allow me to make changes to which microphone is the default and what sample rate it uses. I'm stuck with RealTek microphone array and 48 Hz.

I'm not going to record into BIAB anyway--I bring my audio in externally and my MIDIs come in from MuseScore--so I'm hoping very much this won't affect the way BIAB works for me. It's already such a rollercoaster, working one day and not the next, and I never know what I've done wrong. Just all of a sudden something works after I've tried it half a dozen different times, and who knows what I did differently, or if it was even something I did that day; could easily have been something I did the night before and didn't even notice.

New question. How do I equalize my MIDIs?

I've been reading about EQ and it seems that's what guitar pedals do, so I had thought to try it out and see if I can make the guitar part sound more realistic, and maybe fix the boomy bass and the tinny violins---BUT the only place I know to get it is in the Audio Edit Window and of course the MIDI tracks are empty in that window... yes, of course they most logically are, and I don't know why I hoped it would be different. **sheepish look** There has to be a way to do this, but I can't find it.

I've re-read the chapter on MIDI in the manual and now I know where to find things like slides and pitch bends, so that's a step forward. It's still mostly Greek to me but I found a thread on changing MIDI volume so now I understand about CC7 and CC11 as well. But it seems to me that EQ is something I might change in RB rather than BIAB... maybe I just don't know where to look.


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Dec 2003
Posts: 20,989
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 20,989
Cathie, to set your Realtek:
1-click on Realtek HD Audio Manager
2-click on sound manager
3-click on line in
4-select 16 bits 44100Hz (CD quanity) from the drop down menu

MIDI will not show up as audio. You would have to convert the MIDI track to an audio track as the effects only work on audio AFAIK. Since I do not work that way in BiaB a BiaB expert will have to help you on this one.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
audio set up.jpg (388.38 KB, 93 downloads)

My goal this weekend is to move just enough each day so that no one pokes me to see if I'm dead or not.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Originally Posted By: MarioD
Cathie, to set your Realtek:
1-click on Realtek HD Audio Manager
2-click on sound manager

Thank you Mario.

I don't have the manager... those windows never come up for me, and when I use the search the computer finds no results--which is a LITLLE weird, considering all the realtek files from the internal speakers should have populated. Have I mentioned lately that I am less than fond of Windows 10?? ....okay, I managed to fix the search function enough to find one folder but again, no manager. Maybe this is something I have to download separately?


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Jan 2020
Posts: 2,704
J
Veteran
Offline
Veteran
J
Joined: Jan 2020
Posts: 2,704
Cathie.
re your ZOOM RECORDER
i'm not sure ; but it looks like your zoom recorder has a
usb connector for connection to a pc so it can be used as a recording / playback 2x2 audio interface.
have you ever connected your zoom to the pc via usb ?
is this your zoom recorder ?

https://www.youtube.com/watch?v=LFqo4gOUtgQ

if it IS your zoom in above vid ; the vid shows how to set it to record/playback from pc. which means it might work in realband recording vocals. you can do tons of voc traks in realband. (and also bb)

if its NOT your zoom please post the precise model # of your zoom and confirm that it has a usb port on it.
then the rest of us can look up its features on the zoom
web site.

best oldmuso
ps if zoom dont work i recommend (per upthread) you try a proper audio usb interface.


New Song "PRETTY GIRL" for my wife...Dec 2023
(my vocs....mixed for good earbuds.)
https://soundcloud.com/alfsongs/prettygirlrbfinalcalfsongsdec2023mp3
(and rock song THE STALLION and bluegrass song... BANKER MAN....90 songs useing bb/rb.)
Songwriting
Joined: Dec 2003
Posts: 20,989
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 20,989
Cathie try alt-control-delete all at once to get to the task manager.
In task manager click on startup.
Look for Realtek HD Audio Manager.
Is it there?
If yes right click on it and the click on enable.

If it is not there click on search (the one just right of the start button)
Type control panel
Do you see the Realtek HD Audio Manager there?
If yes adjust your settings there.

If it is not there google Realtek HD Audio Manager and download and install it.


My goal this weekend is to move just enough each day so that no one pokes me to see if I'm dead or not.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Originally Posted By: justanoldmuso
Cathie.
re your ZOOM RECORDER
i'm not sure ; but it looks like your zoom recorder has a usb connector for connection to a pc so it can be used as a recording / playback 2x2 audio interface. have you ever connected your zoom to the pc via usb ? is this your zoom recorder ?

That is amazing!!! Yes, I have an old H1 and I record into it, then connect by USB cord to get the recordings onto my computer. Never had any idea I could record directly into RB using the H1. Thank you!


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Originally Posted By: MarioD
If it is not there google Realtek HD Audio Manager and download and install it.


We're posting at the same time. Nope, it isn't there. Thanks for telling me how to find it.


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Jan 2020
Posts: 2,704
J
Veteran
Offline
Veteran
J
Joined: Jan 2020
Posts: 2,704
Cathie.
re recording into pc useing zoom.
this is new info from you i was not aware of.
but dont get too excited. how old is your zoom ?
you might need to install updates for it on your pc if its old and there are zoom driver updates you havent installed.
it depends if zoom is copacetic with pg software products.
lets take ONE STEP AT A TIME. cos the devils in the zoom installation details.

1. what software are you recording into useing zoom ?
audacity ? it works good ?
2. have you installed the latest zoom drivers/set up from zoom site for your zoom ?
contact zoom support and ask them if there is a proper asio driver for your pc ; and also ask if there is a firmware update just in case.
3. open realband and see if a zoom driver is listed as available in realband audio driver settings.
if you DO. tell us what it says for input and output under asio. or if its a generic usb driver.

best
oldmuso

Last edited by justanoldmuso; 06/18/21 08:14 AM.

New Song "PRETTY GIRL" for my wife...Dec 2023
(my vocs....mixed for good earbuds.)
https://soundcloud.com/alfsongs/prettygirlrbfinalcalfsongsdec2023mp3
(and rock song THE STALLION and bluegrass song... BANKER MAN....90 songs useing bb/rb.)
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
LOL, Mr. Muso, you give me WAY too much credit!!! I record into the H1 itself, and then drop the file onto my dektop and edit it in audacity to get rid of noise, increase the volume, and cut it down to length. That is the sum total of my technical abilities. Until you posted that video, I didn't even know I could plug it into the computer for recording--thought it was only to transfer the file--and I've never done anything more in audacity, either.

The recorder was bought in 2012, I think, and I received it used in 2014. It's not been updated in any way, and as a matter of fact every time I plug it in, my computer tells me it's set up incorrectly and asks if I want to fix it. I used to say yes and let the old computer do its thing, but it never fixed anything and I could still record and transfer files, so eventually i just started ignoring the warning. It might be that this isn't the right solution for me as far as audio interfaces go, because I no longer get the same quality recordings from it and was thinking it needs replaced anyway. I could see if the drivers will update--maybe it'll record better, if nothing else.

Have to say I'm having a hard time concentrating right now; my attention is totally wrapped up in my song playing in BIAB. I made a temporary piano MIDI of the melody and put it in so I can have a guide while I'm singing, and I can't stop bouncing in my chair, lol... found much better piano and violin patches last night, and it sounds like a real song to me now! **huge grin** But I'm sorry to say that even though it's all RT and MIDI, it still renders to MP3 with a lot of static and that just makes no sense to me since there is no static at all in BIAB. I think it just has to be my computer. Tried saving it as a MIDI but that won't play in the media player--no sound at all. Just another thing I'm woefully technically deficient in, lol... couldn't fix the RealTek files either, so I'm thinking this means I honestly do need some hands-on IT help for this computer, and I'll have to add that into the Someday Budget. Maybe next month.

Guess I'm only a few steps up this very steep learning curve. But hey, I didn't fall down this time! And I can play the .SGU which has me dancing in my chair...I'm dying every time the bass walks down to the next part, and I finally found a generation where the synth pad is playing held chords. Managed to go back and forth between my bass part and the bass in the style and between the RD and the loop. The piano, violins, synth pad, and guitar all come in and out. Sounds real to me now! It needs better mixing and I have to go back to the manual and reread the MIDI chapter to find out how to edit the sound. Since I'm using a piano AND two basses on the choruses and coda, I need to at least figure out how to get some of that bottom boominess toned down in the MIDI bass. Have to enter the lyrics now, too. But on the whole I'm pretty happy with it!!

Although I do confess my fear that after all this months'-long build-up, y'all are gonna think the song's an anti-climax and maybe not worth listening to. But it's been a terrific learning experience, and I honestly love it. **sheepish smile**


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Well I exported it again just to see if I could fix the noise. Did some reading and tried out a notch filter--reduced it by about half, but didn't get rid of it. I hear it much worse through the front of my speakers or through the mixing headphones. Gryph doesn't hear it at all... but the sound is just not right. The piano accompaniment seems to be worst culprit but also the sheer number of instruments playing makes a difference; when it's only bass and guitar there's no static at all, when the whole band kicks in for the chorus it's very noticeable.

I read oldmuso's thread about golden nuggets, and clicked the link to the big DAW... and there it was right in the description, "because the last thing you want to hear is your PC!" Oy.

So guys, here are my new questions.
1. if I throw this MP3 into a DAW, is there some way to remove the noise?
2. do you think the existing sound card created the noise?
3. if I get an audio interface, can I render an MP3 or WAV without noise?
4. this is totally counterintuitive to me, but could the rendering process be picking up the room fan? I wouldn't think an internal rendering would even be able to pick up anything in the room, but I have no idea if the microphone array is completely disabled even though BIAB says it is. But if it can't, could the fan blowing directly on me be vibrating my computer enough to interfere with rendering?

Honestly, I would have thought data and programming wouldn't be affected by external things like a fan, but I know enough to know that I really know very little about how things work!


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Dec 2003
Posts: 20,989
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 20,989
I'll try to answer some of your questions but it is hard to determine where the noise is coming from if we can't hear it. Maybe you could post a song with the noise so we can try to determine where it is coming from. Also putting you system's data in your byline would help us.

1- the free Audacity and its plug-ins can do many things to a wav or MP3 including taking out noise. https://www.audacityteam.org/

2-Maybe but we would have to hear it. However it shouldn't be adding noise.

3-yes If the noise is not generated by your computer.

4-If the mic and fan are both on when you are recording then that could cause noise.

Have you tried to record anything other then BiaB? Try recording a youtube audio. Does it have noise? Doing this may determine where the noise is being generated, either by your computer and sound card or your recording.

A couple of last thoughts do you have a cell phone that is on near your computer or keyboards? We have had problems here with musicians having a live phone generating noise while recording and listening. Is your computer very close to your modem or router? That can generate noise also.

I hope this helps and good luck.


My goal this weekend is to move just enough each day so that no one pokes me to see if I'm dead or not.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Songwriting
Joined: Apr 2013
Posts: 8,115
C
Veteran
Online Content
Veteran
C
Joined: Apr 2013
Posts: 8,115
<< 1. if I throw this MP3 into a DAW, is there some way to remove the noise? >>

It's possible but that's a temporary fix and not the solution to your issue. It's likely to only reduce or mask the noise rather than remove it. The solution is to stop the noise at the source.

<< 2. do you think the existing sound card created the noise? >>

No. It could be in the sound source chain, Mic, Cable or sound card's physical connection. The symptoms detailed throughout this thread make me think the noise is externally generated and being picked up along the way into the PC.

<< 3. if I get an audio interface, can I render an MP3 or WAV without noise? >>

It's possible but you'll have to spend the money to find out. Since you know you are currently recording your audio in an external device not connected to your PC, it's a clear indication your PC system including the soundcard is how the noise is getting into your recordings.

It's possible the noise is being 'captured' by the soundcard but just as likely it's some other on-board system or component of your PC. No guarentee an audio interface will 'solve' the problem. It's also possible one brand of audio interface works and the noise is gone while if you choose another brand, it doesn't.

<< 4. this is totally counterintuitive to me, but could the rendering process be picking up the room fan? >>
Yes. It could be your house wiring, plug, a light switch, a power strip, florescent lighting, led lighting, AC, fridge, stove/range, power supplies or a host of other items. It could also be coming from the PC itself...


You can test the audio interface theory with your Zoom H1. Download and install the drivers, connect the USB and set the device as your recording and playback selection, make a test recording and you'll have your answer.


BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Songwriting
Joined: Apr 2013
Posts: 8,115
C
Veteran
Online Content
Veteran
C
Joined: Apr 2013
Posts: 8,115
I have a few questions Cathie.


1. No noise when you import the audio you recorded on your Zoom H1 to edit the file in Audacity?

2. No noise when you import the audio track into BIAB and work on your song?

3. Is the noise limited to just the audio track or to all of the rendered BIAB tracks.
(To test for isolating the tracks and determine this, export each track as a WAV individually rather than a mixed stereo render)

4. My understanding is you don't hear any noise until you render your song in BIAB. Is this correct?

EDIT:

5. Is there ever any noise when you export a song in Audacity?

6. Is there ever any noise when you export a song or WAV file, MP3 from BIAB that you've Not added a externally recorded audio file to?
In other words, can you export songs or files from BIAB without them having noise added when you render?


Last edited by Charlie Fogle; 06/20/21 03:30 AM.

BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Hi guys, thank you so much.

There is zero audio. This is only BIAB RT plus MIDI notation exported from MuseScore (and given BIAB patches). I didn't record anything at all--I just rendered an MP3 right out of BIAB.

I love Audacity, Mario, but it was a no-go. You have to be able to isolate the noise, and this is embedded in the song. I did use the notch filter and it took it down by about half. Dunno if I can repeat that without getting artifacts, though.

The router is around the corner about ten feet away. The cell phone and a small LED lamp are two feet to my right, as are my external (bluetooth) speakers. The plant lights are six feet to my left, behind me. The fan is five feet in front of me. Gizmo (the keyboard) is six feet to my left in front of me.

I turned off the fan and unplugged Gizmo and the plant lights, rendered the MP3 again---noise. So I grabbed an early copy of the song, deleted all the MIDI tracks from it, and rendered only the RT style as an MP3. Clean as a whistle, UNTIL the piano started playing--noise!!

I'm still just baffled. Why on earth do the pianos, both RT and MIDI patch, render with noise?! Nothing else does, not even the synth pad (Pop Modern Groove). I'm not skilled enough to be able to tell what the heck is going on.

Hi, Charlie. When I do record a song with the Zoom H1, I routinely take it to Audacity and remove all the noise. And when I export it as MP3, no noise. When I took an MP3 to BIAB, it played clean--no noise--but then it rendered horribly, tons of noise. But since this current rendering is instrumental only with no imported audio, I don't know whether the noise from the older render (trashed! heck no, couldn't save it, didn't keep it) was just the pianos or was the audio as well.

The more instruments are playing at once, the more noise the pianos make. Don't know if that means there's more than one problem or not. The more I try to track this down, the more complicated it seems to get! And yes, y'all understand correctly, I hear no noise at all until I render the song in BIAB.

There's never any noise when I export an MP3 from Audacity. Just tried it again, to be sure--no noise.

So I tried saving the SGU as a MIDI. Isn't that a trip? No style came with it at all!! And it rendered every single patch as "piano." I could have done that myself in MuseScore, and I'd have had drums. BUT it rendered pretty clean, except for a ringing on a high pitch that corresponds with where I hear the noise in the MP3 rendering. That ringing doesn't show up in the rendered MP3, but then maybe it's buried in the noise--or maybe it becomes the noise.

Gotta say this song makes for an interesting piano piece, even without the style. I'd imagine it needs six hands, lol.

How do I attach a file so y'all can hear it? Does it have to be a link?

Thank you for helping me with this puzzle. You keep me from throwing my hands up in despair and just walking away.


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Apr 2013
Posts: 8,115
C
Veteran
Online Content
Veteran
C
Joined: Apr 2013
Posts: 8,115
Sorry I keep asking questions but I'm on a different track from everyone else. There may be a quick, easy and no cost solution to your issue as soon as I know where the noise is coming from first.

So, with that in mind,

<< Hi, Charlie. When I do record a song with the Zoom H1, I routinely take it to Audacity and remove all the noise.>>
Are you saying the exact same noise that you hear when a song renders in BIAB is also in a recording you do in the H1?
or
Is the noise you're trying to remove with Audacity after a recording on the H1, room background noise picked up by the H1 microphone during recording?

Lastly,

If you select a Style in BIAB, input some chords or load a style demo, play the 'song', does the song play clearly or is there noise?
If it plays clearly, but you render it to a WAV or MP3, that's when noise is inserted into the rendered version that is output?

Do the pianos that are acting up with both MIDI and RT's act up only with the current Style you've chosen or is every piano, MIDI and RT rendering with noise?

What happens if you Rt click on a piano track and select Track Actions\Save as a WAV file?

What I'm hoping for is that BIAB with no type of input other than the instruments of a Style plays clearly and renders clearly.

If that's the case, I may be able to have you recording a clear song tonight... wink


Last edited by Charlie Fogle; 06/20/21 04:27 PM.

BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
Originally Posted By: Charlie Fogle
Sorry I keep asking questions but I'm on a different track from everyone else. There may be a quick, easy and no cost solution to your issue as soon as I know where the noise is coming from first.

Believe me, I appreciate your time and trouble!!!
Originally Posted By: Charlie
Are you saying the exact same noise that you hear when a song renders in BIAB is also in a recording you do in the H1?
or
Is the noise you're trying to remove with Audacity after a recording on the H1, room background noise picked up by the H1 microphone during recording?

The noise I remove from my own recordings is ambient room noise plus my breathing and whatever fans might be running in my keyboard. The noise when I render an MP3 or WAV from BIAB is static, or a high-pitched ringing--but the static sounds like really loud room noise, way louder than I get when I'm recording (and I'm just in my dining room, nothing fancy, not even a pop filter on the recorder).
Originally Posted By: Charlie
Lastly,

If you select a Style in BIAB, input some chords or load a style demo, play the 'song', does the song play clearly or is there noise?

Clear as a bell.
Originally Posted By: Charlie
If it plays clearly, but you render it to a WAV or MP3, that's when noise is inserted into the rendered version that is output?

Yes.
Originally Posted By: Charlie
Do the pianos that are acting up with both MIDI and RT's act up only with the current Style you've chosen or is every piano, MIDI and RT rendering with noise?

Oh dear, I haven't tested that yet.
Originally Posted By: Charlie
What happens if you Rt click on a piano track and select Track Actions\Save as a WAV file?

My speakers shut off. Honest, my doggoned speakers shut off! **eyeroll** Took me a while to figure that out. Now the track is playing in the media player, and there is a small bit of noise, "fuzzy" like the distortion on an electric guitar if it were turned way low (the effect, not the guitar). This is 2461, Acoustic Piano, and it's a RT. This is the cleanest piano sound I;ve gotten so far in a rendering.
Originally Posted By: Charlie
What I'm hoping for is that BIAB with no type of input other than the instruments of a Style plays clearly and renders clearly.

If that's the case, I may be able to have you recording a clear song tonight... wink

Oh, how I wish!! But no, when I removed all the MIDI tracks from an earlier version of my song and rendered just the style as an MP3, it got a lot of staticky noise once this same piano started playing.


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Songwriting
Joined: Apr 2021
Posts: 125
C
Cathie Offline OP
Apprentice
OP Offline
Apprentice
C
Joined: Apr 2021
Posts: 125
**headdesk** I have a simple blues progression up, switched to =POPPLTS.STY the pop solo piano... static. It's just playing in BIAB, and distorted like a fuzzy guitar would be. Gonna shut BIAB down and restart it....

Okay, much less static this time, but not clean like I remember it. **sigh**

2263 Acoustic Piano is pretty clean, and it saved as a WAV pretty clean. _MPBBP.STY, 80s Medium Pop The style rendered as an MP3 with a low background level of noise, almost clean.

1542, Acoustic Piano, no noise in BIAB. _ALTCAMP.STY Absolutely clean in BIAB, rendered clean as a WAV, style rendered clean as an MP3!!!!

Good grief, could it just be the voice patches?


Love is always worth the risk.

HP laptop; Windows 10 Home 64 bit; core i5; 2.40 Ghz; 8 GB RAM; 256 GB hard drive; BIAB 2021 Build 835.
Previous Thread
Next Thread
Go To
Page 2 of 3 1 2 3

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Band-in-a-Box® 2024 French for Windows is Here!


Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!

Tous Packages | Nouvelles Fonctionnalités

Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V

Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!

We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!

Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a

If you like it, watch the video. Either way, let's hear your comments!

Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function

One of the new features added with Band-in-Box® 2024 is the Tracks Window, which will look familiar if you've worked with other DAWs.

Henry Clarke explains why he loves the Re-generation function within the Tracks Window in their video Revolutionize Your Band-in-Box® Tracks with Regenerating Function.

Watch video.

Learn even more about what the Tracks Window can do with our video Band-in-a-Box® 2024: The Tracks Window.

User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®

The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!

His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!

Watch: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box


Band-in-a-Box® 2024 German for Windows is Here!

Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!

Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!

Paket | Was ist Neu

Update Your PowerTracks Pro Audio 2024 Today!

Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!

Learn more about this free update for PowerTracks Pro Audio & download it at www.pgmusic.com/support_windows_pt.htm#2024_5

The Newest RealBand 2024 Update is Here!

The newest RealBand 2024 Build 5 update is now available!

Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.

This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245

Forum Statistics
Forums66
Topics81,891
Posts738,493
Members38,610
Most Online2,537
Jan 19th, 2020
Newest Members
smokeybirdsept2679, Barry Thibault, jodanko, Palomeke, Allan Freihaut
38,610 Registered Users
Top Posters(30 Days)
MarioD 167
rsdean 117
musocity 111
DC Ron 101
dcuny 95
Today's Birthdays
Cole Yee
Powered by UBB.threads™ PHP Forum Software 7.7.5