My bad as I assumed that you knew the other steps. Here is another picture that explains it better....
Thanks Mario, is your last screen shot showing the visual cues I was asking about, or is it showing how to produce the visual cues? My version of Studio One is not as strong as yours.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
Thanks Mario, is your last screen shot showing the visual cues I was asking about, or is it showing how to produce the visual cues? My version of Studio One is not as strong as yours.
It is the visual cues showing how I get to add the markers to Studio One Pro. Your version may or may not be different. If it is different then you will have to hit the manual as I do not have your version.
I hope this helps and good luck.
I just posted a selfie and all of the responses were get well soon!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
It is the visual cues showing how I get to add the markers to Studio One Pro.
I finally understand what you are saying; I suspected there was a communication disconnect. When I referred to the visual cues in Biab being a very nice feature I was referring to the spreadsheet-like grid and the moving cursor from cell to cell in that grid. However, you are referring to markers in S1. I don't believe S1 has visual cues similar to what BiaB has.
But I do appreciate yours and others responses. FWIW I'm gravitating to your approach of getting into S1 as soon as possible in my workflow. In other words, use BiaB for what it is strong in and use S1 for its strengths.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
as long as studio 1 is working for you but having read the original thread i'm surprised.
i plug an electric guitar into my behringer uphoria usb interface, select the uphoria asio driver and rb records 'straight out of the box'
Thanks Bob, I too plug my bass and keyboard and occasionally my drum machine into my Tascam Interface and record them in S1 . . . this works very well.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
I finally understand what you are saying; I suspected there was a communication disconnect. When I referred to the visual cues in Biab being a very nice feature I was referring to the spreadsheet-like grid and the moving cursor from cell to cell in that grid. However, you are referring to markers in S1. I don't believe S1 has visual cues similar to what BiaB has.
But I do appreciate yours and others responses. FWIW I'm gravitating to your approach of getting into S1 as soon as possible in my workflow. In other words, use BiaB for what it is strong in and use S1 for its strengths.
OK you want to line up drum 1, drum2, etc correct?
If that is the case you can do that in Studio One but labeling the tracks and moving those tracks into position. My last picture had guitar, guitar 2, strings 1, strings 2, etc tracks labeled as such. I could have put them in order. Is that what you are looking for?
I just posted a selfie and all of the responses were get well soon!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
I created a +++ request +++ in the Band-in-a-Box Wishlist forum section to suggest PG Music add a "move track" command to the F7 Track Settings and Actions window.
This command would combine initiating several tasks into one command to make moving tracks easier than it presently is while also minimizing the potential to lose or corrupt track data during a move.
Please feel free to add to the discussion or support the request.
OK you want to line up drum 1, drum2, etc correct?
Thanks for continuing to help Mario, your and others interest and inputs really are appreciated . . . but we are still not communicating. I know S1 allows you to reorder your tracks but BiaB doesn't; at least not fully per my understanding.
Jim Fogle submitted the wish list request. I will comment there.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
OK you want to line up drum 1, drum2, etc correct?
Thanks for continuing to help Mario, your and others interest and inputs really are appreciated . . . but we are still not communicating. I know S1 allows you to reorder your tracks but BiaB doesn't; at least not fully per my understanding.
Jim Fogle submitted the wish list request. I will comment there.
I know you can't reorder then in BiaB. I was just trying to show you that you can do that in your DAW. However you already knew that so sorry for the redundancy.
I just posted a selfie and all of the responses were get well soon!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
It would be interesting to know more about your workflow and the need for a specific order of instruments.
First: Instruments can be re-ordered using the move/copy command and their labels customized.
Second: If it's a processing issue, multiple instruments can be placed onto any single track and perform as a bus with up to 4 effects processing all of the instruments while having panning and volume control over each individual instrument. For Example, in BIAB, there can be two (or more) acoustic guitars occupying the same Mixer Channel and playing simultaneously, panned hard left and right and their volume levels adjusted to balance the mix. Both guitars would share the same high pass filter, reverb and eq settings.
Third: I don't follow that the Bar Settings order sequence being exactly the same as the Mixer 8 Legacy Tracks order is clumsy or confusing.
First: Instruments can be re-ordered using the move/copy command and their labels customized.
I know the labels can be customized but not that their positions can be moved in the Mixer Window. Can you show how?
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
You maybe right; in fact I'd say you most likely are since he expressed as much in a wishlist post but ... drag and drop is not presently supported in Band-in-a-Box.
Since drag and drop is not currently supported the next logical step is for someone to create a BiaB wishlist request for the program to support drag and drop of tracks in the audio mixer.
I made a +++ wishlist request +++ for a "Move Track To" command to be added to the F7 Track Settings and Actions window. While not the same as BassThumper's original request the end result should be similar.
If anyone desires to create a wishlist request for PG Music to add drag and drop capability to the audio mixer I would support the request. I would also hope to discuss expectations for how drag and drop would differentiate between moving track names and track data without the possibility of incurring the loss of track data.
Thanks you for the info Charlie, you made me aware of Copy Special, but it fails to do what I am seeking.
I selected Edit, Copy Special and Copy/Move Tracks. I then selected Melody as my Source Track and Utility #7 as the Destination Track and hit OK.
It did not move the Melody track to the Utility #7 position. In fact, as near as I can tell it did nothing at all.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
I may be wrong, but I'm thinking that the O/P wanted to rearrange the track order by dragging a track up/down to a new location
AudioTrack, you are not wrong at all. You understand exactly what I want; to move any given track to any position in the list.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
but ... drag and drop is not presently supported in Band-in-a-Box.
Since drag and drop is not currently supported the next logical step is for someone to create a BiaB wishlist request for the program to support drag and drop of tracks in the audio mixer.
Thanks for the input Jim. My intincts in being timid to submit a wish list were spot on. You pointed out that drag and drop is not supported in BiaB; I had no idea that this was the case; I learned that from you.
This need/wish/request seems to be mushrooming.
Thanks for supporting the logical advancement of this request.
https://soundcloud.com/user-646279677 BiaB 2024 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.