Originally Posted By: JimFogle
George,

What type of amplifier are you using to power the sub speaker? If the sub speaker has a built-in amplifier where are the amplifier audio inputs coming from?

Every sub system I've seen use a low frequency monophonic audio signal either created in the amplifier/mixer or the sub itself.


Jim, this is not talking about sub speakers. This is a whole other thing entirely.

Sub busses are another layer of tracks (in stereo) that us folks who use a full feature DAW such as Sonar or PT, can use to send the tracks of like kind things... like vocals or guitars, or strings, into. The benefit is that all those tracks then are easy to control with volume as a group. It is also much easier to place reverb or any other effect, ONE TIME into the buss rather than to place a different instance of that reverb into 5 different vocal tracks...for example.

With a buss on vocals and lets say 6 tracks.... if you use a buss you can drop in a reverb and compressor, and a widener... 3 plugs, into the buss. You have 3 FX running. If you don't use a buss or the DAW doesn't support busses, to accomplish the same thing would require 18 plugs.... 3 per track times 6 tracks and that's just the vocals..... The processor starts to get very busy if you are not using busses.

You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.