Hi Bob

Do I understand that you want to record the group slider movements so that they automate the mixer on playback ,
Not certain if this can be done, you can of course use automation nodes on each track.

However you can take a snapshot of your final mix after you have set it by hand using the group fader this will set your mix to this setting at the current cursor position.

Here is an extract from a previous post of mine:
This is mainly concerned with saving as midi files
Hi All

Well at last I have cracked it:::
I found the insert button at the bottom of the mixer.
This inserts a snapshot of the mixer settings pan vol etc into the events list at the current cursor track time position.
So be careful to rewind to the start if you are setting your overall starting mix.
After that you can insert new snapshots for other parts of the song later in time.

I can see why it was done this way to prevent you inserting volume changes made while playing by saving and forgetting to rewind the file to start.

Even so a warning would have been nice to say mixer values not saved as midi events unless you take a snapshot..
Hope this helps someone in the future

Mike

BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/