Hi Dominic,

Example #2 at the link in my post that's five above this one, only had a single instrument.

If you have more than one instrument as well as drums, then each of those instruments and the drums needs to be set to a time-base setting of 'halftime'.

NOTE: Make sure that you save your file with a NEW NAME. It's always best to keep the original so that it's possible to return to it.

1. Firstly set the tempo to double (from 65 to 130 as you have done).

2. IMAGE 1 below shows how to set the time-base for Realtrack #2452 String Quartet in the style I'm using.

3. Do this for all the Realtracks and Realdrums in your style.

4. Because you are using an existing song, it's necessary to expand the chords so that one bar of chords covers two cells on the chords sheets.

5. To do this, use "Edit | Song form | Expand chords by 2" as shown on IMAGE 2.

This expands the duration of the chords so that, at the new double-tempo speed, two chordsheet cells at 130 bpm play in the same time as one chordsheet cell at 65 bpm.

Once the above steps are done, it will play properly.

Regards,
Noel

Attached Files (Click to download or enlarge) (Only available when you are logged in)
setting time-base to half-time.jpg (249.33 KB, 153 downloads)
IMAGE 1... setting the time-base settings for a Realtrack or Realdrums (BIAB 2020)
expanding chords by 2.jpg (191.51 KB, 153 downloads)
IMAGE 2... expanding the duration of chords by 2
MY SONGS...
Audiophile BIAB 2024