BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
There's also this after-market tutorial - not maybe what you want, but interesting anyway:
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Another option (which is a lot more work than a simple voice changer) is to use a synthetic voice. Most of them let you convert your voice into that program's internal representation (notes, phonemes, and pitch deviation), and then have the synthetic voice sing it.
There are a lot of downsides to that approach. Using a voice changer is basically loading the source voice, picking a target voice, and getting the results.
With vocal synthesis software, you need to:
* You have to buy/subscribe the software * You have to learn the software (it's like a pitch correction software plus words) * You have to find a voice you like * You have to pay for that voice if you're not on a subscription * You have to fix the import errors (pitch, phonemes) * The performance may be very good, but still to some degree remain synthetic.
On the other hand, you have a lot more control over the voice. Voice conversion software leaves the original performance intact, including issues with timbre. Correcting these in pitch correction software only goes so far, and if you move the voice too far out of range, you'll get artifacts.
With vocal synthesis software, you can completely re-sculpt the performance, and even replace things like vibrato without the timbre going wonky. Changing the gender of the performer is also much more realistic.
I would like to sing on my tunes but I can't stand the sound of my voice.
You have quickly been introduced to two new very powerful tools. But before you go too far down the rabbit hole I would ask you to reconcider these options. I was in your exact position years ago.
What helped me to accept my voice was two things: 1) Vocal Lessons from a pro. There is a lot which can be done to improve how you sing which will improve how you sound. 2) Pre-vocal warm up exercises (see #1) followed by Post vocal processing such as Isotope's Nektar and Neutron.
I still have cringe moments with my vocals which require me to "redo" the performance and I have been accused of overusing the post processing (too much reverb...), but I do get some satisfaction for getting more of me in my music. Think about it.
Does anyone have any experience with a plug in voice changer? I would like to sing on my tunes but I can't stand the sound of my voice.
Nobody likes the sound of their own voice. Learn to live with it
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
I am looking for an actual voice changer app that lets me use a voice of my own choosing. I'm tasked with trying to finish a project for a South American client. Unfortunately, the lead singer passed away before some of his tracks were recorded.
BIAB 2025 Audiophile Mac 24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia, M1 MBAir, 2012 MBP Digital Performer11, LogicPro, Finale27/Dorico/Encore/SmartScorePro64/Notion6 /Overture5
I am looking for an actual voice changer app that lets me use a voice of my own choosing. I'm tasked with trying to finish a project for a South American client. Unfortunately, the lead singer passed away before some of his tracks were recorded.
I don't have any working expertise here, but I do know that Dae Lims, the guy who made did an AI remake of SMiLE had ten different models of Brian Wilson.
In contrast, there were only two vocals models for Randy Travis' AI song - one used 12 vocal samples from Travis’ career, and the other used 42 samples from more recent songs.
I am looking for an actual voice changer app that lets me use a voice of my own choosing. I'm tasked with trying to finish a project for a South American client. Unfortunately, the lead singer passed away before some of his tracks were recorded.
I don't have any working expertise here, but I do know that Dae Lims, the guy who made did an AI remake of SMiLE had ten different models of Brian Wilson.
In contrast, there were only two vocals models for Randy Travis' AI song - one used 12 vocal samples from Travis’ career, and the other used 42 samples from more recent songs.
I need something more basic such as to know which app and a how-to.
Samples are not the problem—I have them going back 35 years.
BIAB 2025 Audiophile Mac 24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia, M1 MBAir, 2012 MBP Digital Performer11, LogicPro, Finale27/Dorico/Encore/SmartScorePro64/Notion6 /Overture5
I need something more basic such as to know which app and a how-to.
Sure.
Perhaps the most popular tool to use is RVC (Retrieval-Based Voice Conversion). The source code is available on GitHub, and there are a many tutorials on how to use it, as well as tools built to make it easy to install and run.
RVC can be installed locally on your computer, but it seems to have the most support on Windows, as opposed to Mac or Linux OSes. Once you've installed the RVC software package, it'll run locally as a web page. You can then do two things:
Create a voice model by training RVC on audio; and
Convert a source audio file using a voice model
It requires a lot of processing power to train a voice, so you're either going to need a computer with a powerful video card (to use the GPUs in the card), have a whole lot of time, run the training on a virtual machine, such as Google Collab, or hire someone to create the file for you.
On the other hand, converting an audio file using RVC can be done with a plain-old CPU. It'll even happen in real time if your computer's processor is fast enough.
There are a lot of tutorials out there, and even a number of forks of the various flavors of RVC. I haven't actually used RVC myself, but I'll supply links to what look like fairly reasonable tutorials. Cavaeat emptor, cave canem, etc.. You're a lawyer, so you love it when people write stuff in Latin, right?
I picked these particular tutorials because they appear to be targeting the most recent versions of RVC.
There is a web interface for RVC, and Google appears to be preventing Collabs with web interfaces from running in their "Free" tier. So there are a number of older RVC Collabs that no longer work in the "Free" tier.
Here's a video tutorial where someone's created a Google Collab for you. The video shows you how to run the Collab. It automatically installs RVC into the Collab. Once you've done that, you can load up training audio, train a voice model, save it to your Google Drive (so it doesn't go away when you close the Collab), and then apply the trained model to a source audio file. You can also retrain a model, and load a prior model:
Notice that he runs only 100 epochs of training to the model, as he's using a free Collab. It takes a lot of processing (and time) to get a high-quality voice. That's where paying Google for the Collab comes in handy.
I also noticed that he didn't split the training data up into a bunch of 10 second files, as most tutorials would have you do. It apparently speeds up the training time to use smaller chunks, but gives less coherent output. (This particular Collab's code seems to only accept one training file anyway).
This one Google Collab is all you need to create a high-quality RVC voice model, and apply that model to target audio. Easy peasy lemon squeezy.
If you want to run things locally, you'll need to install RVC on your machine. And you're likely to have the easiest time using a Windows PC instead of a Mac or Linux machine.
Here's a tutorial (among many) on how to do that. Again, if you don't have a supported GPU card, you might not be able to do any training (because some versions of the packages don't allow that), but you'll be able to perform conversions using a voice model locally:
Here's a tutorial on how to install a web-based RVC Voice Changer Client. It's aimed more for people who what to use RVC as a real-time voice changer, but it supports file input and output:
There's also free program called Replay that's uses RVC, but has a simpler UI. Here's a tutorial on how to install and use it:
Since I posted all those details, I figured I'd have a go a it myself.
I used Spleeter on a set of early songs by America (Daisy Jane, God of the Sun, Ventura Highway, To Each His Own), and split them into vocals and backing track.
In Audacity, I loaded the isolated vocals, and edited together Gerry Beckley's solo parts for 2:15 of medium/low quality vocals.
I used the previously mentioned Google Collab to create a Gerry Beckley vocal model. It took about 25 minutes to run 200 epochs. A high-quality training would be around 1000 epochs, depending on the training data. Audio upload/download times to Google Collab are fairly slow.
I saved the resulting model to my Google Drive (making sure the code didn't do anything malicious to my drive first!).
I used Spleeter to isolate the vocals and backing track on America's "Tin Man", which is sung by Dewey Bunnell.
I used the same Google Collab using the Gerry Beckley model to convert Dewey Bunnell's isolated lead vocals from "Tin Man". The result was as expected from using dirty stems and a low number of epochs. The voice was clearly Gerry Beckley, but with relatively low sound quality and some poorly converted phonemes.
Obviously I can't post the results.
I also downloaded Replay. Recall that at heart, Replay is just a wrapper around RVC:
Since I don't have supported Nvidia video card, it could only run in CPU mode so it was slow.
I needed to watch the video to figure out how to use it. It didn't help that part of the options can't be seen without scrolling the screen.
I tried creating a voice model. It took Google Collab 25 minutes to create the low-quality model. In that same time, Replay only got three epochs completed, so I cancelled that.
I downloaded the RVC voice model I'd created in Google Collab from Google Drive. It was a .gz file, so it required being decompressed several times using 7Zip. The .pth file contains the model, and is found in the \assets\weights folder.
It took about 17 minutes to covert the audio file using the voice model.
So using the Google Collab is an easy way to try out RVC for free. The one I linked to is by no means the only or best one out there, but it is super easy and runs in the Free tier of Google Collab. And if you've got the paid version of Google Collab, you have access to the RVC GUI, where you can see how the training is doing, or restart training on an existing model.
In the other hand, if you've got a supported Nvidia card, it looks pretty easy to run RVC on your machine, especially if you use something pre-packaged like Replay.
Hey, David, this certainly points me in the right direction.
Not doing Windows anymore but my Mac Studio M2 Ultra's 76 Core GPU should be able to do the necessary crunching—if not, there's a 24 Core CPU.
Although I have a few Spleeter based apps plus Steinberg's SpectraLayers Pro 11, none of that should be necessary. I have a few GB of isolated vocal tracks from this and previous projects. In addition, another band member does a spot on impression of this guy's phrasing (usually, I'm saying, "cut that out—sing like yourself!") so all I need to do is to see if I can get a convincing match of his timbre.
I'll update with my progress. Thanks again!
BIAB 2025 Audiophile Mac 24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia, M1 MBAir, 2012 MBP Digital Performer11, LogicPro, Finale27/Dorico/Encore/SmartScorePro64/Notion6 /Overture5
Hey, David, this certainly points me in the right direction.
Glad to hear it!
Quote
Not doing Windows anymore but my Mac Studio M2 Ultra's 76 Core GPU should be able to do the necessary crunching—if not, there's a 24 Core CPU.
That's far more than my puny machine! For a moment I considered picking up a Nvidia card with CUDA so I could try running some of this technology locally, but it looks like I'd have to pay a minimum of $250. That's not a huge amount of money, but I've other toys I'd rather buy first.
Quote
Although I have a few Spleeter based apps plus Steinberg's SpectraLayers Pro 11, none of that should be necessary.
Sorry, I was just describing what I'd done, it case anyone was curious. For zero dollars, it's possible to experiment and get interesting results.
With someone that's already able to do a convincing imitations, plenty of training data, and a high-powered machine, it sounds like you should be good to go.
Here is a song I made using musicfy [video:youtube]Stand by Me (capo 3) Cover Song by CooperSync play along with scrolling guitar chords and lyrics [/video]
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean