|
Log in to post
|
Print Thread |
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
I recently increased the RAM in my PC from 512 Mb to 2 Gb. Shoulda been great, right? Instead, I found that my CPU was being hammered, often--and I mean really often--showing 100% usage for extended periods. Not what I expected, especially since I don't recall ever using more than about 30% of physical RAM.
Then it occurred to me to check the virtual memory settings. This is typically supposed to be about 150% of physical RAM. Well, it was--when I had 512 Mb. Now it was about 1/3 of my RAM.
To check and/or change performance settings in Windows XP, right click on "My Computer" and select "Properties". Click on the "Advanced" tab--then do it again. For my purposes (music workstation), the best settings were "Processor scheduling: Background services" and "Memory Usage: System cache".
Since setting up my PC I had also learned that the pagefile should be on another drive than the one on which your OS resides. So I clicked on "Virtual memory: Change", put it on D:\ and used the recommended setting shown; in my case, 3070 Gb. (More is Not A Bad Thing.) You can also let Windows set it for you, but it didn't seem to be giving me enough. After you do this you will have to restart your machine for the change to take effect.
If your defrag utility will let you do this, as Norton SpeedDisk used to, have it put the pagefile on the physical outer edge of the drive, which rotates faster and therefore yields better throughput. Every little bit helps. And of course, defrag often.
My CPU still peaks out at 100% at times, but for much shorter periods. Otherwise it tends to max out at about 65%, and then only for short periods. And I have to have a LOT of things going on to make that happen. Much better now.
Happy musicmaking,
R.
Last edited by Ryszard; 04/01/09 03:48 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Oct 2007
Posts: 2,610
Veteran
|
|
Veteran
Joined: Oct 2007
Posts: 2,610 |
You're not using Norton on your machine, are you? That right there takes up most of your resources when it comes to CPU usage. Norton is VERY, and I say it again VERY bad for any configuration. AVG is less CPU hungry. I found that it's best to disable any AV programs when trying to use your PC as a DAW, no matter which program you use.
Just a thought.
Mike
Cheers, Mike My Music * Asus ROG Strix G15CF 32 GB DDR4 4TB HDD + 1 TB SSD NVIDIA GeForce RTX 3060 8GB Win 11 AKAI EIE PRO Sound Interface. BIAB/RB 2024 UltraPak Build - Latest
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
I mentioned Norton as a reference only, and that only for their Speeddisk defrag utility. It used to let you define where certain types of files went on the physical disk, as well as specifying their order. Alas, Symantec/Norton have systematically reduced user control over their products, so I have found other, better (and FREE!) alternatives. Haven't used NAV for years. AVG became too resource-hungry and didn't offer much control, so I now use Avast! antivirus. It at least allows me to disable the online scanners when I so choose. AVG used to, but when they introduced ver. 8 I couldn't find that option any more. Per another user's recommendation, I have switched from the free Glary Utilities (which I still recommend) to IObit's Advanced SystemCare Free. It has a nice defrag utility, as well as a memory optimizer which is superior to Glary's. IObit also have a "Game Booster" utility which looks promising; it optimizes your system at the touch of a button, then returns it to its original state when you have finished your turbocharged session. Not like another one I tried (idiot!); my system hasn't been the same since. In the meantime, setting up the disk cache as mentioned above made a huge difference. All of this represent a compromise, of course. I will shortly have a dedicated DAW with NO extraneous software, and a separate PC for teh interwebz. Thanks for the thoughtful remarks. R.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
With 2gb of memory your system should be doing very little hard paging. If you feel like tweaking your own and not letting Windoze do it for you, try a pagefile min and max of 500/3000. I'll bet it never grows past 500. Putting your page file on a different drive probably won't make much difference since paging is not your problem.
Your performance settings are the opposite needed for a workstation. Those you have are for a server. I'm curious why you chose those.
You did not mention how old your computer is. Perhaps you're just 'processor bound'. You can use the Task Manager to see what processes are eating up your CPU. And watch out for those programs that 'tweak' your system. They often cause more harm than good.
R
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Oct 2007
Posts: 2,610
Veteran
|
|
Veteran
Joined: Oct 2007
Posts: 2,610 |
Quote:
And watch out for those programs that 'tweak' your system. They often cause more harm than good.
R
No doubt about that! I've experienced that myself. I have since refrained to the conventional methods of keeping my system "clean".
Best,
Mike
Cheers, Mike My Music * Asus ROG Strix G15CF 32 GB DDR4 4TB HDD + 1 TB SSD NVIDIA GeForce RTX 3060 8GB Win 11 AKAI EIE PRO Sound Interface. BIAB/RB 2024 UltraPak Build - Latest
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Mar 2009
Posts: 235
Apprentice
|
|
Apprentice
Joined: Mar 2009
Posts: 235 |
I have to agree with Rachael there. A good doses of RAM helps limiting the use of slow pagefiles. However, if you make your pagefiles large, the chance that (too)many stuff ends up in there is bigger and slows down a system. In fact I run 3 different systems, that is, they are in hardware all the same, but they differ in software and other applications. Some of those applications demand from me to use page files, so I do that, to a limit. I do not like the setting Rachael recommended though, I rather use a fixed standard in which high and low size is the same amount. Expanding and shrinking of a pafgefile also slows processes down. On two of my systems I even dont use it at all, it runs like crazy there. No swapping, just in and out of the RAM without those swap-delays.
Check your most exagerated use of programs that you might run in one time together in as Racheal mentioned your task manager. By checking processor and memory usage, you should be able to set up a better maximum for your virtual memory.
As for the settings referred to by Racheal as server settings: That maybe so, but some programs use these settings as optimized performance settings for their programs (Digidesign Protools e.g.)
I have to admitt that when I was reading your post, I got a nostalgic Win98 feeling, for those systems the settings you use were not rare, but for XP, 2000, Vista, things drastically changed on those points of view.
And for sure check what Racheal said, what processes are causing those peaks. If possible, turn them off, allready before starting them. So then you need to change some settings in your services. A nice thing to check would be the webpages of "blackviper". Just google it and tweak your system by hand instead of those nice handy little tools, that indeed can change more than you would want it to change, giving all control out of hands.
I'll be back...
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I've heard of this. Might be worth trying for $39.00 http://www.litepc.com/xplite.html
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2009
Posts: 20
Enthusiast
|
|
Enthusiast
Joined: Apr 2009
Posts: 20 |
From what I can find the OP's system is pretty old.
The first thing to do when possible is increase system memory. 2 gigs is good, 4 gigs is better, though it may not be possible in the OPs case because of physical limitations of the motherboard.
I am not able to find the specs for that MB but that is really beside the point since the point was simply the effects of memory (correct) and swap file (also correct MAYBE).
The 32 bit versions of XP and Vista will not use more than 4 gigs (actually somewhat less) so do not bother trying to get more than 4 gigs if you have the 32 bit versions.
If you have XP X32 and 4 gigs it is unlikely that you will need more. If you have Vista OTOH...
If you build your own machines (I do) then a motherboard / processor swap might be the best bet. AMD dual and even quad cores are CHEAP as is memory. I actually swap motherboards without even reinstalling the system. Just have your driver disk handy for the new mb. This assumes of course that you are not using a raid for the boot disk and changing to an incompatible chipset.
A dual core with 4 gigs should give you all the processing power you need and can use.
jwcolby
Ensoniq ZR-76 keyboard, m-Audio Minisport 2x2 Anniversary Edition
AMD x2-3800, 2gb RAM
XP SP3, BIAB 2008
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
So's you guys'll know, I work on PCs as part of my self-employed living. I'm no authority and I do make the odd stupid mistake, but I sorta know my way around machines and Win OS. Quote:
From what I can find the OP's system is pretty old.
Five years.
Quote:
The first thing to do when possible is increase system memory. 2 gigs is good, 4 gigs is better, though it may not be possible in the OPs case because of physical limitations of the motherboard.
I'm maxed at 2 Gb.
Quote:
If you build your own machines (I do) then a motherboard / processor swap might be the best bet. AMD dual and even quad cores are CHEAP as is memory. I actually swap motherboards without even reinstalling the system. Just have your driver disk handy for the new mb. This assumes of course that you are not using a raid for the boot disk and changing to an incompatible chipset.
A dual core with 4 gigs should give you all the processing power you need and can use.
AFAIK, the best I can do with the present mobo is go to a 2.2 GHz AMD Athlon XP v the present 1.8 GHz. I've long since deemed that unworthy of the time, effort, and expense. If I replace both MB and processor, then I need new memory and drives as well. So, until I can afford the new system from the ground up--(and I've been building my own since 2000)--this is still the fastest thing I've ever owned. I'll just have to make do, I guess. *g*
R.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2009
Posts: 20
Enthusiast
|
|
Enthusiast
Joined: Apr 2009
Posts: 20 |
Understood Ryszard. And I understand the "gotta replace everything" issue. OTOH if you NewEgg, a modern MB, processor and memory could be had for as little as $210. I use the AMD-790GX with the built-in graphics (I don't game). MB: $90 http://www.newegg.com/Product/Product.aspx?Item=N82E16813138140Two gigs of RAM: $28 http://www.newegg.com/Product/Product.aspx?Item=N82E16820231098A triple core with fan: $77 http://www.newegg.com/Product/Product.aspx?Item=N82E16819103254Everything else in your system could likely be used. This is a very usable system if you are not trying to build a gaming system. I use thatBiostar MB and it is nice, though it has no MOSFET cooler. I use one of the first 4 core AMD chips (slightly lower clock speed IIRC), works fine. And I use that memory except 2 gigs / stick (slightly more expensive but more memory). I run SQL Servers on that hardware. Cheap and gets the job done. Go with the Gigabyte MB if you want to OC: $120 http://www.newegg.com/Product/Product.aspx?Item=N82E16813128384With either MB you now have an upgrade path to the new Phenom II quad core at a later date if you find you need it. As you know building your own has the advantage of lower cost and upgrades down the road, though to be honest a low end DELL is a mighty powerful machine.
jwcolby
Ensoniq ZR-76 keyboard, m-Audio Minisport 2x2 Anniversary Edition
AMD x2-3800, 2gb RAM
XP SP3, BIAB 2008
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2003
Posts: 11
Newbie
|
|
Newbie
Joined: Apr 2003
Posts: 11 |
I've never built a computer I didn't like (and I've built every computer I've ever owned  ) ...Another quick tip, it might not affect performance too much but it will free up hard drive space. Reduce the default size for system restore, even more so if you have drive partitions (system restore on additional partitions has little value). If you're getting tight for room and have been using Windows defaults, you could get some space
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2009
Posts: 20
Enthusiast
|
|
Enthusiast
Joined: Apr 2009
Posts: 20 |
Quote:
I've never built a computer I didn't like (and I've built every computer I've ever owned ) ...Another quick tip, it might not affect performance too much but it will free up hard drive space. Reduce the default size for system restore, even more so if you have drive partitions (system restore on additional partitions has little value). If you're getting tight for room and have been using Windows defaults, you could get some space
My first computer I built from parts kits in 1976, s-100 backplane, z-80 based with 24K of RAM. It ran Basic that loaded off of a cassette player. To be quite honest it wasn't much fun. It took 3 minutes to load a 16K basic interpreter and it crashed on the least excuse.
OTOH the next machine I built (about 1982) had an 80186 and 512K of RAM, and a dual floppy. That is what I really learned to program on.
jwcolby
Ensoniq ZR-76 keyboard, m-Audio Minisport 2x2 Anniversary Edition
AMD x2-3800, 2gb RAM
XP SP3, BIAB 2008
|
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Aug 2009
Posts: 3
Newbie
|
|
Newbie
Joined: Aug 2009
Posts: 3 |
Quote:
My first computer I built from parts kits in 1976, s-100 backplane, z-80 based with 24K of RAM. It ran Basic that loaded off of a cassette player. To be quite honest it wasn't much fun. It took 3 minutes to load a 16K basic interpreter and it crashed on the least excuse.
whoa! thats right .... that kind of PC is not so much fun as it is so slow like a turtle. i guess nowadays PC's are so fast.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,739
Posts795,617
Members39,946
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean