Do they deal at all with digital audio specifically?
Nope. That's why I want to upgrade soon so I can see how it works. The document in the original post is a great read at 10 long pages but I don't think Microsoft did any major infrastructure changes that would impact audio at all.
The link I posted is just the landing page to start the upgrade process and which method you want to do that.
Do they deal at all with digital audio specifically?
Nope. That's why I want to upgrade soon so I can see how it works. The document in the original post is a great read at 10 long pages but I don't think Microsoft did any major infrastructure changes that would impact audio at all.
That's been my experience so far - nothing much has changed. Of course, I'm using newer hardware (2020 HP Envy and Focusrite Mk3) so other people's results may differ.
At home, I'm building a new Windows machine around an i5 11400 and associated "up to date" parts compared to my old ~2014 machine, so I don't imagine I'll have too many problems with Windows 11. Of course, the one part I'm waiting on is the CPU itself...
Last edited by Simon - PG Music; 10/08/2112:54 PM.
simon. can you read my mind. lol. ive been looking at same i5 processor. rateing on cpubenchmark.net 17372. but otoh i might wait for prices to come down.
best om
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I want to read these - thanks, guys - but do they deal at all with digital audio specifically?
Sweetwater does a pretty good review of the impact on digital audio at their site. Along with some of the how's as far as what is required for upgrade etc.
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
simon. can you read my mind. lol. ive been looking at same i5 processor. rateing on cpubenchmark.net 17372. but otoh i might wait for prices to come down.
best om
The 10400 is a good alternative for a few bucks less, though it does bench a bit lower. That's the problem with waiting - there's always new stuff around the corner.
I'm going with the 11400 specifically because it's the most power for the money with the lowest TDP. It's a 65-watt chip, which is important because I'm building a very small formfactor ITX machine (the case is just over 3" thick and around 15"x13"), and if I were to put in the i9 9900k I have in my main machine it'd probably melt. There are faster 65-watt chips, but they take a big jump in price.
IIRC Planobilly recently built a 10th gen i5 machine and was very happy with it even compared to the i7 or i9 he put in his other machine. I think it was Billy anyway...
I read an article about Win11 yesterday, and I wasn't happy with what I read. Win11 is all about security enhancements, but what M$ is doing is requiring new hardware with these security protocols built in for Win11 to install properly. I wasn't happy because my newest system, which I put together just a few months ago so I could run Win10, has a motherboard that's about 7 years old. I bought a clean used MB with the old style PCI slots because I have some legacy hardware that I run on my DAW.
So it looks like I won't be upgrading to Win11 -- or any other subsequent M$ OS -- for as long as I continue to use the legacy hardware. The day may come when its drivers will no longer be compatible, which will force its retirement, but until then I will use the hardware and I'll be happy using it.
Personally, I do not like the idea of embedding code into hardware. I just don't like it, no matter what the hardware is or what its purpose is. Except maybe BIOS, but that's it.
There's some tools you can use to check your system and some prep things you can do with your machine to get it ready. My laptop CPU is 8 years old and I was able to get it working flawlessly so far. I think that although Microsoft has a lot of requirements, they want your machine to be more secure from attack. Once you go through some of these steps prior to upgrade, I think you'll feel a little better about it. I'm a huge tech nerd and wanted to dive in right away to share my experiences with all of you.
Personally, I do not like the idea of embedding code into hardware. I just don't like it, no matter what the hardware is or what its purpose is. Except maybe BIOS, but that's it.
From a quick Google, every Intel computer since 2008 has had the Intel Management Engine built into it, and every AMD computer since 2013 (maybe earlier) has the AMD Platform Security Processor. Both of which use proprietary embedded code for a variety of things. Going further back, most motherboards had an embedded controller of some sort. Unless you don't mind running really old hardware or you design your own, this kind of stuff is inescapable no matter what OS you use.
There's some tools you can use to check your system and some prep things you can do with your machine to get it ready. My laptop CPU is 8 years old and I was able to get it working flawlessly so far. I think that although Microsoft has a lot of requirements, they want your machine to be more secure from attack. Once you go through some of these steps prior to upgrade, I think you'll feel a little better about it. I'm a huge tech nerd and wanted to dive in right away to share my experiences with all of you.
While I agree that the CPU cutoff Microsoft decided on is higher than it needs to be, one of the reasons they decided this is likely due to the other associated hardware and any required drivers. Many of the companies that produce sound chips, LAN controllers, WiFi, etc probably don't want to create Windows 11 drivers for decade-old hardware.
I don't personally recommend installing Windows 11 on unsupported devices, as there can be a host of problems involved. An older unsupported computer might be able to boot Windows 11 and might appear to be stable, but might end up having very strange and seemingly unrelated problems. Your mileage may vary, but from my experience working in tech support here and at previous companies, the users who have problems are most often users with the oldest hardware, and exponentially more when running an unsupported OS.
That said, I'll personally be running Windows 11 on a 4th gen i7 desktop with no TPM for at least a few months, so I'll see how it is.
I'm going with the 11400 specifically because it's the most power for the money with the lowest TDP. It's a 65-watt chip, which is important because I'm building a very small formfactor ITX machine (the case is just over 3" thick and around 15"x13").
This is exactly what I'm in the middle of researching now. My only issue is if I build a new system myself I'll have to pay for Win 11 Pro which could be $150? I just spent a few minutes surfing the MS site and don't see Win 11 for sale. Is it actually for sale yet? That's the main reason I bought the ZBox used, it had 7 already on it so 10 was free. Otherwise I see a lot of mini ITX's on Ebay with that i5 10400 chip with Win 10 Pro so 11 is free.
Simon and JM. one reason i like refurbs is i save on buying windows, plus i get a decent warranty. also ive never had one prob ever compared to friends buying new retail pc's which often need cleaning up.. of bloat etc.
but the 11400 cpu has sorta thrown me cos...is it better basing a pc round it, OR are the 500 buk ...........
hp z or lenovo beasts a better deal. with xeons. om
Last edited by justanoldmuso; 10/18/2101:16 PM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I agree about the value of refurbs it's just that I'm replacing my ZBox which is about the size of an older external drive. For me it's about the smaller size. The one Simon is building is about twice that big but still small and you can fit some high end parts in it. That's why I'm considering both right now. The mini ITX can be a fairly powerful machine but the standard ITX is better. I think the difference is the regular ITX can be almost as powerful as a full size tower while the mini ITX can be comparable to a high end laptop.
JM. Bob. case size dont bother me. i'm seeing some silly low prices on off lease refurb hp and lenovo workstation beasts with xeons/ssd etc. win 10 included. (for win 7 lovers some include 7). prices as low as under 300 buckies for a refurb xeon beast.....how much faster will rt's gen useing one vs tother. i mean if i'm only gonna save one second..meh lol. i'll stick with refurbs. but if 11400 is a BIG diff over cheapo refurbs, then that interests me.
so i wonder if i'm mixing down a 40 trak song, how much time will i save useing a new 11400 based system vs a refurb beast.
what i'm hoping for is now that apple has gone with its own silicon (now added m1max etc) that intel will respond by lowering prices on its higher end processors. thus undercutting apples mi pricing.
the other option bob i sometimes consider is pc turnkey for recording studios. some reaps users seem to like these... https://studiocat.com/opencart2/ (i got nuttin to do with them. just find em interesting.) and there are lots of others silentpc, scan uk etc etc. i think some even offer small form factor if i remember. https://www.slickaudio.com/mini-pc-for-music-production/
best/happiness bob om
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I'm going with the 11400 specifically because it's the most power for the money with the lowest TDP. It's a 65-watt chip, which is important because I'm building a very small formfactor ITX machine (the case is just over 3" thick and around 15"x13").
This is exactly what I'm in the middle of researching now. My only issue is if I build a new system myself I'll have to pay for Win 11 Pro which could be $150? I just spent a few minutes surfing the MS site and don't see Win 11 for sale. Is it actually for sale yet? That's the main reason I bought the ZBox used, it had 7 already on it so 10 was free. Otherwise I see a lot of mini ITX's on Ebay with that i5 10400 chip with Win 10 Pro so 11 is free.
Bob
The 10400 is a very good chip, so if that's much more cost effective I'd say go for it. I might go that way too, simply due to motherboard availability and cost.
This is also the reason I bought a "retail" Windows license, as it can be moved from one machine to another. Some Windows licenses can be transferred, particularly the "upgrade from regular Windows 10 to Pro". OEM licenses that come preinstalled cannot be transferred.
Originally Posted By: justanoldmuso
Simon and JM. one reason i like refurbs is i save on buying windows, plus i get a decent warranty. also ive never had one prob ever compared to friends buying new retail pc's which often need cleaning up.. of bloat etc.
but the 11400 cpu has sorta thrown me cos...is it better basing a pc round it, OR are the 500 buk ...........
hp z or lenovo beasts a better deal. with xeons. om
Depends which Xeon. Quick google search, the HP Z400 is a common inexpensive refurb with a Xeon W3503, which has a benchmark score of 1052, while the i5 11400 scores 17383 - no I did not type an extra digit in there, it is 17 times as fast!
Another one that came up, an HP Z800 with two Xeon E5620's would score around 6528, so the i5 is still 3x as fast. Nice thing about a new 10/11 gen build is new connectivity, like USB-C, options for Thunderbolt, super fast PCIe storage, etc.
All depends on the total cost though. A cheap refurb is still a bit cheaper than the parts to build your own 10/11th gen machine. Mine's going to cost around $800 CDN or so just for parts, not including labour or the video card and OS I bought previously (not that everyone needs a fast video card).
Originally Posted By: jazzmammal
I agree about the value of refurbs it's just that I'm replacing my ZBox which is about the size of an older external drive. For me it's about the smaller size. The one Simon is building is about twice that big but still small and you can fit some high end parts in it. That's why I'm considering both right now. The mini ITX can be a fairly powerful machine but the standard ITX is better. I think the difference is the regular ITX can be almost as powerful as a full size tower while the mini ITX can be comparable to a high end laptop.
Bob
There is only Mini ITX, no other versions exist - perhaps you're thinking of Micro ATX or full ATX vs ITX?
The mini ITX I'm building is not using laptop-grade components - it'll have a desktop i5 11400 (or 10400 depending on what parts I find - local supply is atrocious at the moment), 32gb of desktop-size RAM, 2tb NVMe SSD, and a GTX 1060 6gb video card. What ITX does is simply make the motherboard smaller by reducing some connectivity options - only 1 PCIe slot, reduced port selection, only 2 RAM slots, and on many ITX boards they'll only accept the "lower"-spec chips like the 11400, 11500, 11700, but not the overclockable K-series chips that require more wattage. There isn't much power difference for me between an 11400 and an 11600K, but the 11600K uses 50% more electricity and subsequently creates more heat.
This is only 5 x 5 inches and uses the mobile U chips. But I can't find a separate case for one of these, just the barebones kits like this one. My current Zbox is sitting next to my 60" HDTV in my living room which is why I want it small but a few of the mini ITX cases would fit behind the TV too. I'm just deciding how much power do I really need because I'm not a gamer. A desktop CPU is better than the mobile one but do I care? Not sure yet because as far as Biab is concerned my old I7 4770 will still render a full RT song in about 10 seconds depending on if I'm using a RT soloist or not. I've found it's the soloist that slows down the generation and can double that time.
We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!
Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!
Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.
Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles
And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.
You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.
Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!
With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2025 RealCombos Booster PAK:
-For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles.
-For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles.
-For UltraPAK customers, this includes 20 new RealStyles.
Look Ma! More MIDI 13: Country & Americana
Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
MIDI SuperTracks Set 44: Jazz Piano
Artist Performance Set 17: Songs with Vocals 7
Playable RealTracks Set 4
RealDrums Stems Set 7: Jazz with Mike Clark
SynthMaster Sounds and Styles (with audio demos)
128 GM MIDI Patch Audio Demos.
Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
Look Ma! More MIDI 14: SynthMaster,
Instrumental Studies Set 23: More '80s Hard Rock Soloing,
MIDI SuperTracks Set 45: More SynthMaster
Artist Performance Set 18: Songs with Vocals 8
RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!
Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!
We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!
Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Windows!
We've just released XPro Styles PAK 9 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean