|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Oct 2011
Posts: 36
Enthusiast
|
OP
Enthusiast
Joined: Oct 2011
Posts: 36 |
I need some advice around having my sound in my studio mix matching the sound on the CD. I've got my studio pretty well set up...I'm happy with the sound. I use Roket G6 monitors and the bass mix is great. When I record to a CD the bass is too loud. Any thoughts on what I should do inside the studio to correct this. I don't want to have to run the bass so low that I have to "guess" on the final sound. I don't feel that adding traps would help as I'm setting equidistance from the monitors and it would seem that I'm hearing only the sound from the monitors uncolored by studio acoustics Any help would be greatly appreciated! JMK@KnightSounds
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,540
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,540 |
If the result is the bass is too strong, you'll have to learn that those monitors are not providing the correct amount of bass during your work time. You can get a suitable EQ type plugin to push a little more bass to the speakers and use it regularly so your mixes do not end up too heavy, or learn to use an analyzer to 'see' the bass in your mix.
Another aspect (more likely in my mind) is that those monitors only reproduce down to 49Hz (according to specs), so you may want to incorporate a subwoofer. I don't think you are hearing the true bottom end as is.
Just a couple thoughts on it.
What are you comparing it to, as far as the CD playback? Any chance that system is not true?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Another even more likely issue: The room you monitor/mix in may have some very strong room modes, that coupled with where you monitor in that room, causes you to mix with not enough bass. You can send a swept sine starting with about 10 Hz up through 500 Hz or so (I know there are swept sine .wav files available on the internet - if not, I'll look through my archives and find you one and post to my website) through your entire recording system, with a microphone located at your listening/mixing position, and record that signal back into your DAW. First make sure that you are not feeding back that microphone signal to playback!!!!. Look at the recorded waveform. If you see something other than a flat response recorded back - you likely have some room modes to contend with. This is highly highly likely, as most home studios aren't designed as mixing rooms. What you will likely see is at least one or two regions in the recorded waveform that are much much higher amplitude than other regions. These are the evil room mode frequencies. Using a freeware FFT analyzer plugin like SPAN from Voxengo, or rharv's old fave freq analyst http://www.bluecataudio.com/Products/Product_FreqAnalyst/you should be able to see what frequency(ies) those are. Those require some EQ out of your final mix bus. Gingerly play with them using a parametric EQ to pull them out so that when you try the sweep recording again, you get a more flat response. Another way to do this is to send white noise through your system and record. Here's a place with lots of .wav files to download and use for recording your system's overall response. http://www.burninwave.com/
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
You'll first need to buy a mic that is meant for taking measurements.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
John, I agree with you in spirit but not in whole. Most mics are flat enough, or have a gentle slope, such that if you go through a room mode, you still will see it 'loud and clear', when you do either a sweep or a broadband noise excitation as I suggested above. I agree with you in spirit because for 20+ years I have used measurement grade microphones from Brüel & Kjær and G.R.A.S. on the job, when I needed precision. In this case precision is really not necessary. Even an SM 57 http://www.shure.com/idc/groups/public/documents/webcontent/us_pro_sm57_specsheet.pdf has a flat enough response in the low end such that you can do these kinds of measurements. If there was a big resonance bump in the low end response, then that can throw one off. With an SM 57, with it's gradual rise in the low end as frequency increases, what one should expect to see in the recorded time history is just a gradual rise in the recorded level over the sweep. However, my suspicion is that Knightsounds' room is like most of our home studios, in a bedroom or basement or office, where room modes can dominate low frequency response. If the monitors are in a corner or close to a wall (say within 1.5', then he/she is going to couple with those room modes and they will totally mess with low frequency mix ability. The recorded sweep will have pretty sharp bumps where the room modes are an issue. -Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2011
Posts: 36
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2011
Posts: 36 |
I appreciate your suggestions...I have worked with several of them. I believe The easiest solution (I believe) would be the plugin to push a little more bass to the speakers suggested by rharv.
Rharv, I'm fairly new at this "computer recording" but if I understand correctly, I'd hear more bass in the speakers when mixing down but this would not be in the final mix when using the plugin. What specifically should I get?
Also, I'm comparing my final sound to commercial CDs that I like.
My studio is twelve by twenty four and is only used for my music. The monitors are in one end about 18 inches from a windowed wall. The right one is about 8 inches from the side and the left is about 5 feet from the entry door. It is offset in the end due to the entry. Would the right speaker possibly be the issue as it is close to the wall?
Thanks,
JMK
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,540
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,540 |
Maybe speaker placement, you can tinker with it.
Yeah, if you end up hearing more bass while working, you'll trun it down which is what you are looking to change in your end CD.
Try the PGMusic 10 band EQ, boosting 30 and 60, put it into the main out FX area and use it while working. Once you get it set correctly (thru experimentation) save that setting as a preset for easy use in the future. To set it quickly, try different settings, and make notes, so later when you play the CD elsewhere you can go back and say "that';s the one that worked".
When you go to do the final merge just use the bypass button on the plugin. This way you are hearing more bass from your speakers, but not writing it to the end result for other systems .. then test on other systems.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Another thing to try is play your fav CD through the same studio system you're mixing with. Do direct A/B comparisions using several different songs and EQ your recording until it matches the CD. It's also helpful to record parts of your CD and look at the waveform in the Audio Edit window, then look at your preliminary final mix track in the same window. Just comparing the waveforms can tell you a lot. Many times with a commercial CD you'll discover it has been compressed and limited to death and the thing looks like one solid mass with a hard cutoff right at -0.2db. Hardly any dynamics at all. I hate that but if you really want to match the CD then that's what you need to do as well.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,050
Posts799,404
Members40,018
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean