|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 4
Newbie
|
OP
Newbie
Joined: Apr 2003
Posts: 4 |
How do I get MIDI Out from my computer (band in a box ) to my Roland Sound Module? I have my Korg Keyboard MIDI out connected via a 15-pin MIDI Interface to a Soundblaster Live! soundcard and it plays in Band in a box perfectly. But there is no output from the computer to the module. The Out from the computer is connected to the inA of the module. In B is no better. Any thoughts?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 6,352
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 6,352 |
If your Roland Sound Module has a MIDI in, and your computer has a USB out you can get a USB-MIDI interface. It's a small piece of hardware, USB powered and it is relatively inexpensive. If you don't need other bells and whistles, something like a M-Audio Uno, Roland UM-ONE, or Edirol UM-1EX should set you back less than $50.00 I have a couple of old Edirol UM-1 interfaces that have been working flawlessly for years. Brand new 2012.5 updates from Norton Music:- 2 new style disks for Band-in-a-Box
- 2 new free (with a purchase) fancy intro/ending disks for Real Band and other DAW's
- The Ultimate Gospel Fake Disk
- The Real Rock Fake Disk (plenty of classic rock in this one)
- The Beatles Fake Disk
- And an updated Christmas Fake Disk
Hundreds of Free .sgu and .mp3 demos for the above at: http://www.nortonmusic.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
Notes is right on it. You are way "under-hardwared". Look at eBay and Craigslist for a USB MIDI interface. I highly recommend the M-Audio Fast Track Pro. They all do the same thing, that thing being sending a MIDI data stream back and forth. Where you get the differences is how seamlessly the interface integrates and interacts with your software. That M-Audio that I have went in like buddah! Load the driver, restart, plug in the interface, let it detect, make a chance in the hardware control panel to make it your default hardware, launch Real Band, make the innies and outies match up in Prefs, and boom. Make music.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 191
Apprentice
|
|
Apprentice
Joined: Nov 2010
Posts: 191 |
Hi there,
If this is a physical connection problem, I would do as Notes has suggested and get the USB-MIDI cable. It's much easier.
If this is purely a lack of sound problem, maybe it's the receive channel on the Korg that needs to be set to match the MIDI output channel of the BIAB track.
All the best.
yjoh
[i]Music...a joy for life.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
That connector on your sound card, that port that was originally for a joystick, is it not an in AND out cable? If so, you are wired wrong. If not, check with Soundblaster and see what they have for you. I seem to remember WAY back I was using that 15 pin port for MIDI but I had a Y cable that had in and out.
I still can't figure out what you are trying to accomplish. You want to play parts INTO your software or play existing part back on a different sound source (your synth)?
Best case hardware scenario is a USB MIDI interface and a MIDI thru box. Plug in one keyboard as the controller to the MIDI IN, and then plug the MIDI OUT to the input of the thru box. You can find a 1 in 8 out thru box almost anywhere. Like $10-20 bucks used.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 19,812
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 19,812 |
Hi John, From what I read of your description, I don't think you need to get a USB MIDI in/out device. I used to run MIDI in/out from a Soundblaster Live and it worked fine. It was quite a while ago though. I used the joystick socket and the plug I connected with had separate In and Out cables. It sounds to me like you have the "Out" of your MIDI connection (on the computer) already connected to the external device but you are not hearing anything. Am I correct? If that is the case, Try "Opt | Preferences | MIDI Driver" and set the "Output driver to 'something' I/O. (e.g. on my computer, I have a Creative Audigy 2 ZS and the "Audigy 2 ZS MIDI IO" seen in the image below is the driver that sends information to my external device.) You'll also need to deactivate the VST/DXi synth, though, as that is an internal one.  Lastly, you'll need to exit BIAB and restart it for these settings to take effect. I'm not sure that this will solve your problem, but it's where I'd be looking if I was trying to solve it. Hope this helps, Noel
MY SONGS...Audiophile BIAB 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 191
Apprentice
|
|
Apprentice
Joined: Nov 2010
Posts: 191 |
Eddie, you're right we need to know what John is trying to do firstly. Would John need to have the thru box as well as the USB cable?
Couldn't you just have the USB-MIDI cable connected, then choose the Korg as either the input driver or the output driver in the MIDI/AUDIO drivers setup options in BIAB?
When I have my keyboard set up with the computer and just the cable, I can use it as a master controller and send or receive MIDI data.
In my old ATARI days with no MIDI interface, I bought a MOTU MIDI Express for a MIDI patch bay, used the D50 as the controller and sent data to the other synths via the midi express.
Worked well.
With the laptop and the soft synths now, I use my Roland keyboard to input MIDI and have the soft synths as the playback.
yjoh
[i]Music...a joy for life.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 191
Apprentice
|
|
Apprentice
Joined: Nov 2010
Posts: 191 |
Gee you guys are fast! I just finished typing and Noel has posted what I was getting at WITH screenshot!
Wow, good one Noel.
yjoh
[i]Music...a joy for life.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 4
Newbie
|
|
OP
Newbie
Joined: Apr 2003
Posts: 4 |
Hi Noel:
You understand my problem exactly. Your suggestions had already been checked, to no avail. I am beginning to believe the OUT part of the connector may be faulty. I have a second one i'll try. Thanks,everybody.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
The MIDI Thru is just a connection point to make it easier to have multiple devices connected to one place without having to recable every time you change boards. As has been stated, I absolutely HATE to spend time fooling with cables. HATE IT! I actually have a "smart" MIDI switching system that accepts up to 50 configurations that route master/slave and sends patch change information. But again, that's just how I do it.
On topic, we really need to know what you are doing. If it's simply routing, then the screen shot you got showing how to set the interface ins and outs should do it. If you want to send MIDI clock to control a sequencer or drum machine there is more to do.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 4
Newbie
|
|
OP
Newbie
Joined: Apr 2003
Posts: 4 |
Hi Eddie:
I am fairly well-versed on things MIDI, although hardly expert. I am an old guy, self taught on most things musical. To answer your earlier question: I want to play, say, piano on the Korg thru its own speakers, , send MIDI data to computer to hear,say, organ, inside band in a box( and perhaps hear a bb demo here as well), then play ,say, trumpet in the module, all instantaneously. I can achieve all but the module part.
I have MIDI cable from Korg to computer and from computer to module.
Regarding the matching of channels between devices, I had encountered a problem awhile ago with a Native Instruments software program that took a while to find and fix. Re my present problem, is there a channel selector tab or the like to select an output channel in bb. I can select the input channel on the module ok.. Thanks
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 191
Apprentice
|
|
Apprentice
Joined: Nov 2010
Posts: 191 |
BIAB has a MIDI channel for each of its tracks as listed below.You could set your module to receive, say channel 3 and the BIAB piano track would sound in the module.
Bass 2
Piano 3
Drums 10
Guitar 7
Strings 6
Melody 4
Soloist 8
The Thru channel is 5. The Harmony channels are 11,12,13,14
You can find the channels in the preferences menu under OPT. You can change the set channels here if necessary but it does say to leave them as is.
I would change the MIDI channel on the module to match the output channel of the BIAB tracks.
yjoh
[i]Music...a joy for life.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 19,812
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 19,812 |
Hi John, Quote:
Your suggestions had already been checked, to no avail. I am beginning to believe the OUT part of the connector may be faulty. I have a second one i'll try.
It might not simply be the cable, it could also be the external device. For example, it might be that your external synth is set to receive signals only on channel 1 (often a default - see PG Music note on image below) and BIAB is sending information on the channels yjoh has so clearly listed. Check your synth's documentation for setting it to receive on all channels and in poly-note mode. Also, make sure that volumes are around 90.
Here's something else to try. While the below screen-capture is from BIAB 2012, I imagine that there's something equivalent in other versions.
Go to "Opt | Preferences | Midi Driver" and run the "Output Driver Wizard". That has a "Piano Test" button on it which will send a signal on Channel #1.
Maybe someone with an external module will jump in and talk us through how they set it up. (Mac is amazing on this stuff. You could try emailing him and see what happens.)
I'm searching through the PG Music Support tutorials at the moment. If I find one that does the job, I'll post the link.
Regards,
Noel
MY SONGS...Audiophile BIAB 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Band in a Box can only address ONE MIDI synth selection at a time...
So, without resorting to external softwares such as MIDIYOKE, etc. it is an either/or situation.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 4
Newbie
|
|
OP
Newbie
Joined: Apr 2003
Posts: 4 |
To Quote a great old song: I'm beginning to see the light.
First,I wasted time changing the cable. It made no difference.
Second, I now know that what I was trying to do won't work. Why not? Because the MIDI Output Driver Wizard allows sound from either the soundcard or from the module but not both. Thanks, Mac.
I don't thoroughly understand, but my testing proves something. When I select the soundcard, my keyboard plays the BIAB sounds; when I choose the module in the Wizard I control the module's patches. Mac hit the nail on the head and Noel' guidance led the way.
Something I have to get my brain around, though: Why is it that I can set up a daisy chain of keyboards and hear the selected sounds of each, but can't with software like BIAB?
Ok, Onward to sequencing study with Power Tracks.
Thanks to all out there for your helpful contributions.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 191
Apprentice
|
|
Apprentice
Joined: Nov 2010
Posts: 191 |
I've been thinking there has to be a way this will work, so some thoughts on this possible solution. I've set it out in steps but no particular order.
If there is a standard MIDI THRU port on the back of the Korg, the module could be hooked up to it and set to receive on a channel from BIAB (or more than one channel if it's multitimbral).
The Korg is hooked up to the computer via the USB-MIDI cable and is set to internal with local on so that it can be played along with BIAB with it's own speakers. It'a basically independent of the BIAB output.
The screen Noel put up with the option to use the external device would need to be checked. This way the one port issue that Mac brought up would be ok as all the MIDI channel/s from BIAB would be going back to the Korg and on thru to the module.
BIAB could be generating the real tracks which is Audio and doesn't have MIDI channels, while the MIDI track/s would be going out the one port to the module.
If there is a basic flaw in my theory just put in down to old grey matter and a studio with hardware synths gathering dust!
I've got to logout now but will check later tonight to see what you all think. Will it work!
yjoh
[i]Music...a joy for life.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,220
Posts776,512
Members39,598
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean