|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 349
Journeyman
|
OP
Journeyman
Joined: Nov 2010
Posts: 349 |
Instead of buying a new Win 8 machine or attempting a new ground up build, I was thinking of just upgrading the motherboard, processor and RAM on my 8 yr old, Dell, Windows XP 32 bit desktop to an ASUS P8Z77 motherboard with i7-2600K processor and 8 gigs of RAM.
2 yrs ago I replaced the power supply, fan and hard drive so know they are in good shape.
After seeing all the problems people are having adjusting to the new non intuitive Win 8 system, which most new computers come with now, I thought I'd stick with what I'm comfortable with and save some $$$ at the same time.
My question is, can I change the MB etc ,plug in the old hard drive with XP on it and expect it to work, will I have to do a complete system re-install or is this just a can of worms waiting to be opened?
Thanks for any input,
Carkins
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2009
Posts: 3,158
Veteran
|
|
Veteran
Joined: Aug 2009
Posts: 3,158 |
Hi,
Probably you can do this if you want but more than likely will mean a complete system reinstall.
But is it worth it, for a few hundred more a new computer, or build one yourself with a new quieter case such as the coolmaster silio range with foam inside to cut down noise?
Musiclover
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2007
Posts: 1,439
Expert
|
|
Expert
Joined: Dec 2007
Posts: 1,439 |
An 8 year old version of XP will need significant driver updates for the new hardware platform, you will probably need to at least do a repair install. You will also need to re-activate XP.
One significant problem you will run into will be support for AHCI vs Legacy IDE settings in BIOS for your HDD.
Your existing installation will almost certainly not understand AHCI (XP doesn't ship with AHCI drivers) and in modern MBs the legacy settings give pretty poor performance, especially by comparison to AHCI.
There are ways around this but I'm not going to try to go into it at this kind of distance - it's harder to explain than to do...
Of course, you can elect to run in legacy mode and it will work fine, probably just slowly.
Otherwise, make sure ASUS have XP drivers available.
If it was me, I'd opt for a new machine but specify Win7 - you should still be able to get it and it will understand all the current high performance bits and pieces on the MB. I'd also go for a fairly large HDD - at least 1.5 TB.
--=-- My credo: If it's worth doing, it's worth overdoing - just ask my missus, she'll tell ya  --=--You're only paranoid if you're wrong!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
The new motherboard will likely come with a CD that holds drivers for onboard video, sound and NIC, so that should be okay. Your outboard stuff like a MIDI interface will have drivers already on your hard drive if you are using it now. This should go smooth as silk for you.
Remember that the motherboard was not actually built with an operating system in mind, but I would do some research to make sure the drivers available go back to XP. Since Micro$oft disowned XP a lot of hardware companies no longer care to write drivers for it. I will also add however that I have never had an issue with OEM supplied drivers and I once, as a text, put hard drives on a new motherboard that ran XP, Vista and 7, reloaded OWM drivers each time, and they worked fine.
Typically is you buy a "name" motherboard the coverage is thorough. If you go with "Bob's Motherboard" you may have problems.
Mileage may vary.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
What about IDE vs SATA? If the old HD is IDE it won't work with this mobo. I would really think about this if I were you. Even if there is some kind of IDE>sata adapter you're wasting all that new fast stuff, an old IDE HD is way slower in data thruput than a SATA one. From the ASUS spec:
"The Intel® Z77 Express chipset natively supports the next-generation Serial ATA (SATA) interface, delivering up to 6Gb/s data transfers. ASUS provides extra SATA 6Gb/s ports with enhanced scalability, faster data retrieval and double the bandwidth of current bus systems."
You're going to try to put in an antique old, slow HD into this hot rod mobo? When I say old, sure you can buy brand new IDE drives now but they're still old.
The only thing I would use is the case if I really, really liked it.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2007
Posts: 4,251
Veteran
|
|
Veteran
Joined: Oct 2007
Posts: 4,251 |
carkins, Dell uses propietary motherboards so you would also have have problems there. I've got an 8yr old Dell in the closet. It was a hoss in it's day, but I wouldn't even consider trying to upgrade it. As far as Win 8 goes, my son just bought a new laptop and hated the interface. He was going to wipe it and install Win 7. I told him to download this app for $4.99: Stardock Start 8. http://www.stardock.com/products/start8/He now loves Win 8. It brings back Win 7 functionality and even gives a few new tricks for Win 8. You can also switch back and forth between the two.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
Drive form factor will be critical. If you have old IDE drives and the new mobo has SATA connections, you will need to bit copy (Ghost, Drive Image, etc....) your boot IDE drive to a SATA drive. That is going to take some hardware and software you may not be familiar with. I know it can be done because I have done it several times, but it depends on your familiarity and computer experience level.
Your easiest option is to order a computer with Windows 7. If you enjoy the challenge, go ahead with parts. You CAN still buy motherboards with IDE data bus but they are indeed going away as Bob the Jazzmammal said.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2011
Posts: 3,363
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 3,363 |
Everything said so far, plus - if you wanted to stay with XP, remember that 32bit XP will only recognize 4 gig of RAM and that includes whatever the graphics have as well.
ROG.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
Veteran
Joined: Sep 2007
Posts: 3,926 |
Actually, a 32-bit OS only recognizes 3.5 Gb of RAM, so even if you have 4 Gb it won't take advantage of the dynamic refresh rate, thus slowing it down further. Short version: Get a great new PC and have fun!
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2010
Posts: 349
Journeyman
|
|
OP
Journeyman
Joined: Nov 2010
Posts: 349 |
Thanks to all. Lots of good info. Stardock looks like a good deal for Windows 8 with Win 7 functionality. Will definitely go with a new computer or maybe a ground up build. One other odd thing is why does ASUS ship new computers with 5400 rpm hard drives on their desktops? Does the i7 processor's speed mean a 7200 rpm isn't needed? Seems strange from such a well respected mfg. Probably just trying to reduce old HD inventory or maybe going for that "Retro" look  Anyways, thanks again for all your help. Carkins
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,517
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,517 |
Yes, they are dumping old drives. I build all my own, because the one time I bought an HP from the store, I discovered I could not upgrade it. There wasn't even a place to mount a second hard drive, and that's just an example. Even if I could add another drive, the power supply wasn't enough to handle it. Etc. Those store-bought PCs are as stripped-down as they can be, to save costs and allow for blow-out prices. Beware if you want anything serious from them.
The slow drive speed just means the i7 processor is sitting around even longer waiting for something to do. That's a terrible waste to have such a mismatch. An IDE drive with a motherboard that supported SATA is a similar mismatch.
+1 for Start8 from Stardock. Windows 8 is great if you bypass the start screen and apps, and if you can find drivers for all your music peripherals.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2007
Posts: 1,869
Expert
|
|
Expert
Joined: Jul 2007
Posts: 1,869 |
I dont know your funding situation but all the advice is good above. If you do decide to install a new operating system then also think about get an SSD drive as your system drive. This significantly speeds up your whole system. The price has come down and you dont need a big one if you are going to use it just for system files.
For me, I would be concerned abut sticking with XP. As an operating system its pretty good, but support for XP is being dropped. Win 7 is a really stable operating system, but currently more expensive than win 8. Running in 64 bit is important if you intend to use VST's of the heavy duty kind - the sample based types.
I thought about win 8 and even tried to install it. I bought it at £25 UK, however, my monitors do not support the resolution required. All the metro apps simply crashed my system. There is a compatibility wizard on the microsoft site which checks out your system ( this sometimes gives innactuate info), but if you are building for Win 8 you had better do some homework first. I had a list of ten of my applications that were not supported. None of these issues with win 7.
IMO (only) if you get down and dirty with a MOBO its best to get as future proof as possible - maybe hand on for Santa Claus?
Last edited by ZeroZero; 12/20/12 03:57 AM.
Win 11 64, Asus Rog Strix z390 mobo, 64 gig RAM, 8700k
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,092
Posts800,135
Members40,033
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean