|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2009
Posts: 4
Newbie
|
OP
Newbie
Joined: Sep 2009
Posts: 4 |
I do the music for our church. fOR the last 8 years I have been using BIAB for composition and Power Tracks for performance of hymns on an ASUS laptop with windows Vista. Ready to purchase new Laptop or notebook. Any sugestions on a good set up. Need to make sure I have advanced sound card for performance of MIDI.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,115
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,115 |
I have always used Toshiba laptops but I don't think the brand makes as much difference now as it used to.
All reputable laptops now come with built-in sound cards that are fine for audio. This would include playback of RealTracks. MIDI is another matter, for which an external module may be needed for really good sound quality, but there are fine software synths available. What are you using now? And what's your budget?
Just a word about the output jack. The weak link is that mini headphone jack. They break and the connection can become very noisy. Nothing like the sound of thunder through a church PA system if you even look at it funny. It is primarily for this reason I like an external sound module. It plugs into the laptop via the reliable USB connection.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2009
Posts: 4
Newbie
|
|
OP
Newbie
Joined: Sep 2009
Posts: 4 |
Yes, I have been using the Headphone jack and I have looked at it wrong, and Ouch. I am currently using CoyoteWT synth I run direct from laptop to Amp/monitor. then into church system mixer. Been trying to figure out for years how to get rid of a faint "ringing/feedback pitch over certain MIDI instruments, most notably the piano. Budget not really too much of an issue. Just want best sound possible
Last edited by dseadin; 09/11/14 05:24 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,115
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,115 |
Ok. The Coyote WT (wavetable) is about the worst possible sound for MIDI, so you have a lot of possibilities. PG Music included it for use in 64-bit Windows so people would have something.
Coyote Forte is a different product, only $40 or $50 I think, sold here. It would be a good upgrade. After that, the sky is the limit for hardware synths (from a few hundred to thousands), and similarly for software synths. Have you experimented with SampleTank that comes with the last couple of versions of BIAB? That's a software synth that can give really nice sound and is fully expandable.
I use a Roland Integra7 for my MIDI sounds but those cost over two grand.
About the "ringing/feedback" you hear, that sounds more like an acoustic design problem with the hall. There are gadgets that just monitor and suppress feedback. I would start with EQ first, and then perhaps experiment with changing the placement or direction of the speakers in the hall. But try some detective work to pin it down.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,479
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,479 |
.....Budget not really too much of an issue. Just want best sound possible Oh man do I love it when people say that!!!! Yes, almost any modern laptop will do the job. But the soundcards that the factory uses.... a chip on the MOBO in most cases does NOT do the job. Purchase a USB based external musical interface from Focusrite, M-Audio, Presonus, Roland, or other, which supports the number of outputs and inputs you need. For backing tracks in a church setting, a stereo rig is sufficient in most cases. 2 ins, 2 or more outs. Some interfaces have the MIDI (5 pin din) input on them as mine does, and some do not. New midi devices have started using USP ports. So, be aware of your needs in that respect. Look for that midi port on the interface, it makes it easier IMHO. However, direct midi input to the computer via USB also works. Just depends on how you want to do it. Be sure it has NATIVE ASIO drivers.... in other words ASIO and not some driver wrapper or proprietary codec. Other features you may want include nice built-in preamps on the audio in's, phantom power, more channels, DSP processing internally, etc.... if you plan to use it to record. I find that BB tends to run well on my off the shelf (old Inspiron) with the MME driver and running BiaB without issues. I use TTS as my default synth. It's when I open that same project in Real Band (RB) and try to play it....if it has any synth tracks in it, I end up with huge latency issues. I can then take the very same project, on this same computer, and reopen it and play it with my Focusrite Saffire interface connected and there is ZERO noticeable latency.... everything plays in synch. So, a decent interface, running ASIO, does make all the difference in the world. Just run the interface's stereo outputs to the PA board and let it play. Expect to pay around $200 (+/-) for a nice stereo interface. Hope this helps you a bit.
Last edited by Guitarhacker; 09/12/14 04:54 AM.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I agree with Mr. Finley on Toshiba. As to an "interface", you don't need one. You're not recording, just using the laptop for playback. You don't need a recording interface for that - it's overkill, and you won't hear the difference through a PA. The integral sound module in the laptop will be 16 bit/44100 Hz/CD quality, which is sufficient. I run audio and MIDI on a $400 Toshiba Satellite laptop into two different PA's with zero problems. You will have to upgrade your PC to Mixer connection, though. These are cheap, and give you two balanced lines to your mixer, and it's stereo/mono switchable: http://www.musiciansfriend.com/pro-audio/peavey-usb-p-usb-di-format-converter Keep it simple. The Peavey is plug and play, and transformer-isolated to eliminate ground loops.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,115
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,115 |
That's a good looking device. It eliminates the mini headphone jack and gives low impedance XLR connections (allowing longer distance cables). Good find, thanks.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,479
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,479 |
I have to disagree with 90db on saying that you don't need an interface if you're not recording. Half of what a sound card does is playback as far as function and probably 90% of the music through it is in the playback mode.
I mentioned that I encountered issues with latency when I used Real Band and had synths on the tracks. Latency is a playback issue more so than a recording issue in most cases.
It goes back to the driver. The default factory sound card driver is usually MME. And MME simply can not handle the processing needed to keep the midi/synth tracks synched in real time to audio tracks in a given project. Some computers can do OK but most can not run MME satisfactorily under these circumstances for complicated software like we use. I have yet to see a factory chip designed to run MME that will work with naked ASIO. Wrappers for ASIO might work sometimes, but not always, and it's not the best way to solve the issue anyway.
I do find that straight up Band in a Box will play nicely on my laptop using MME as the driver but not a DAW with midi synths in it. That takes the processing power of a dedicated interface running ASIO drivers.
So... if you are only using BB to create and play the backing tracks, you'll probably be OK..... but if you are using Real Band or some other DAW as the source, you'll need ASIO and an interface that can use that driver if you use plug in soft synths in the tracks of the project.
If BB plays fine, and you need to get a midi source in for live piano or something else, the interface does that PLUS.... it gives you sturdy 1/4" output jacks as opposed to the wimpy 1/8" headphone jack.
Since you said in the third post that money is secondary to performance, get the interface. It does what the Peavey does and more. Do it right the first time.
Last edited by Guitarhacker; 09/12/14 07:27 AM.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
That's a good looking device. It eliminates the mini headphone jack and gives low impedance XLR connections (allowing longer distance cables). Good find, thanks. I just picked one up on advice from the guys over at PSW. My old M-Audio Mobile Pre died at sound check right before a gig last week and I had to run off of the 1/8" jack. There are more expensive units, like the Radial, but I'm cheap! 
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I have to disagree with 90db on saying that you don't need an interface if you're not recording. Half of what a sound card does is playback as far as function and probably 90% of the music through it is in the playback mode.
I mentioned that I encountered issues with latency when I used Real Band and had synths on the tracks. Latency is a playback issue more so than a recording issue.
Actually, no. “Latency” relates to the time delays between a signal entering and then emerging from a computer soundcard. All sound cards and interfaces exhibit latency to some degree. In playback mode this latency is determined by the speed of the D/A conversion, and is so small as to be a non-issue. In recording mode, latency is determined by the quality of the A/D conversion, drivers and buffer settings.
So... if you are only using BB to create and play the backing tracks, you'll probably be OK..... but if you are using Real Band or some other DAW as the source, you'll need ASIO and an interface that can use that driver if you use plug in soft synths in the tracks of the project.
The OP has already stated that:
“I am currently using CoyoteWT synth I run direct from laptop to Amp/monitor. then into church system mixer.”
The Coyote Forte that Matt recommended will work perfectly on whatever laptop the OP gets.
If BB plays fine, and you need to get a midi source in for live piano or something else, the interface does that PLUS.... it gives you sturdy 1/4" output jacks as opposed to the wimpy 1/8" headphone jack.
The OP didn't say anything about MIDI. Only playback of tracks. And that “sturdy” ¼ output jack is an unbalanced line level signal prone to noise and electrical interference. In fact, it carries the same signal as the 1/8 jack. The unit I recommended provides two balanced, low impedance outputs on XLR's.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,115
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,115 |
Good point. There can be many sources of electromagnetic interference in a church (or any commercial building), such as industrial heating/AC, refrigeration, fluorescent lighting, neon signs (well, maybe not in most churches!), electrical wiring, etc. Using balanced cables in such situations is important.
Aside: I played in one church that was next to a radio transmission tower. We could not get the station's signal out of the audio no matter what. It also played in the toaster etc. The church burned down, cause unknown. I always wondered what was pulsing in the building's electrical wiring...
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,479
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,479 |
Good point. There can be many sources of electromagnetic interference in a church (or any commercial building), such as industrial heating/AC, refrigeration, fluorescent lighting, neon signs (well, maybe not in most churches!), electrical wiring, etc. Using balanced cables in such situations is important.
Aside: I played in one church that was next to a radio transmission tower. We could not get the station's signal out of the audio no matter what. It also played in the toaster etc. The church burned down, cause unknown. I always wondered what was pulsing in the building's electrical wiring... In all of the bands I played in, none of them ever used balanced lines to feed the amps in the PA. We used shielded 1/4" unbalanced lines and never had any problem with hum or interference except one nightclub that was 300 yards from an AM radio station. Since the radio station reduced power at sunset, that issue went away as well by the time we played the shows there. Balanced is better, but often, not necessary.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
Good point. There can be many sources of electromagnetic interference in a church (or any commercial building), such as industrial heating/AC, refrigeration, fluorescent lighting, neon signs (well, maybe not in most churches!), electrical wiring, etc. Using balanced cables in such situations is important.
Aside: I played in one church that was next to a radio transmission tower. We could not get the station's signal out of the audio no matter what. It also played in the toaster etc. The church burned down, cause unknown. I always wondered what was pulsing in the building's electrical wiring... In all of the bands I played in, none of them ever used balanced lines to feed the amps in the PA. We used shielded 1/4" unbalanced lines and never had any problem with hum or interference except one nightclub that was 300 yards from an AM radio station. Since the radio station reduced power at sunset, that issue went away as well by the time we played the shows there. Balanced is better, but often, not necessary. It's not a matter of it being 'better'. There is a right way to wire a PA, and a wrong way. All cabling is "shielded". XLR mic cables are balanced. Mixer insert cables are balanced (TRS). Mixer to amp cables are balanced. GEQ's to amp cables are balanced. External processor cables are balanced. This is done because pro equipment operates at +4dBu, and because hum and interference is cumulative in a system. PA speaker cables are not balanced, but if they cross AC lines, they will pick up AC interference, usually in the form of 60 Hz hum.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,479
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,479 |
I'm not talking about speaker feeds...
Thousands of bands are doing it wrong according to you.
But I forgot.... you're always right.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I'm not talking about speaker feeds...
Thousands of bands are doing it wrong according to you.
But I forgot.... you're always right. Not according to me. According to accepted professional SR practice. I'm not always right, but I am in this case.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,115
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,115 |
I don't think there is a dispute here, just a question of degree in the unlikely event you run into sonic trouble. We got pretty far afield from the original issue: connecting a laptop to a PA in church.
I believe we have already provided the OP with some good suggestions. Let's see what dseadin decides.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,479
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,479 |
Sorry... the reply just struck me wrong.
In fact both are correct. The majority of folks playing music use unbalanced lines and have no problems. However, when problems with induced noise and hum occur, if nothing else solves the issue, using balanced lines may just work.
Everything in my studio is unbalanced. (Including me) And there is no hum, no interference. The fact is, both methods work fine.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
“Everything in my studio is unbalanced. (Including me) And there is no hum, no interference. The fact is, both methods work fine.” At the dire risk of incurring your wrath once again........ The following is taken from the operation manual of your own interface: 1. Eight balanced analogue outputs on 1/4 TRS jack, labelled 1-8 in ascending order from bottom to top 4. Headphones outputs and level controls This section features two stereo 1/4" TRS ( Balanced) jack connectors Mic: 2 x XLR ( Balanced) on front panel ANALOGUE OUTPUTS Line level: 8 x 1/4 balanced TRS Jack HEADPHONE MONITORING 2 x 1/4 TRS ( Balanced) Jack on front panel http://d3se566zfvnmhf.cloudfront.net/sites/default/files/downloads/7064/saffire-user-guide-english1.pdf You may be running unbalanced cables, but it is not recommended for your interface. Your sound will improve using the correct cables. Not insisting that I'm “right”, of course. Just a friendly suggestion.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro and Xtra Styles PAKs Special Extended Until August 31st!
XPro & Xtra Styles PAKs Special Extended Until August 31st!
The XPro Styles PAKs and Xtra Styles PAKs special offers are now available until August 31st at 11:59pm PDT!
Ready to take your Band-in-a-Box® 2025 experience to the next level? Now’s the perfect time! Expand your style library with XPro and Xtra Styles PAKs—packed with a wide variety of genres to inspire your next musical creation.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-9 includes 900 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). With over 3,500 styles (and 35 MIDI styles) included in Xtra Styles PAKs 1-20, the possibilities are endless!
Get the XPro Styles PAKs 1 - 9 for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Windows or for Mac.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Get Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 19 PAKs for $199 (reg $399)! Listen to demos and order now! For Windows or for Mac.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Don’t miss this chance to supercharge your Band-in-a-Box setup—at a great price!
Mac 2025 Special Upgrade Offers Extended Until August 15th!
It's not too late to upgrade to Band-in-a-Box® 2025 for Mac® and save! We've extended our special until August 15, 2025!
We've added many major new features to Band-in-a-Box® 2025 for Mac®, including advanced AI tools like the amazing BB Stem Splitter and AI Lyrics Generator, as well as VST3 plugin support, and Equalize Temp. Plus, there’s a new one-stop MIDI Patches Picker with over 1,100 MIDI patches to choose from, all neatly categorized by GM numbers. The MultiPicker Library is enhanced with tabs for the SongPicker, MIDI Patch Picker, Chord Builder, AI Lyrics Generator, and Song Titles Browser, and the tabs are organized into logical groups. The Audiophile Edition is enhanced with FLAC files , which are 60% smaller than AIFF files while maintaining identical audio quality, and now ships on a fast 1TB SSD, and much more!
Check out all the new features in Band-in-a-Box® 2025 for Mac® here:
Purchase your Band-in-a-Box® 2025 for Mac during our special to save up to 50% off your upgrade purchase and receive a FREE BONUS PAK of amazing new Add-ons. These include the 2025 RealCombos Booster PAK, Look Ma! More MIDI 13: Country & Americana, Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes, MIDI SuperTracks Set 44: Jazz Piano, Artist Performance Set 17: Songs with Vocals 7, Playable RealTracks Set 4, RealDrums Stems Set 7: Jazz with Mike Clark, and more!
Upgrade to the 2025 49-PAK for just $49 and add 20 Bonus Unreleased RealTracks and 20 RealStyles, FLAC Files for the 20 Bonus Unreleased RealTracks, Look Ma! More MIDI 14: SynthMaster, MIDI SuperTracks Set 45: More SynthMaster, Artist Performance Set 18: Songs with Vocals 8, and RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe.
Learn more about the Bonus PAKs!
New RealTracks Released with Band-in-a-Box 2025!
We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!
Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!
Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.
Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles
Check out all the 202 New RealTracks (in sets 456-467)
And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.
You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.
Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!
The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!
Bonus PAKs for Band-in-a-Box 2025 for Mac!
With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2025 RealCombos Booster PAK:
-For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles.
-For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles.
-For UltraPAK customers, this includes 20 new RealStyles.
- Look Ma! More MIDI 13: Country & Americana
- Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
- MIDI SuperTracks Set 44: Jazz Piano
- Artist Performance Set 17: Songs with Vocals 7
- Playable RealTracks Set 4
- RealDrums Stems Set 7: Jazz with Mike Clark
- SynthMaster Sounds and Styles (with audio demos)
- 128 GM MIDI Patch Audio Demos.
Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- Look Ma! More MIDI 14: SynthMaster,
- Instrumental Studies Set 23: More '80s Hard Rock Soloing,
- MIDI SuperTracks Set 45: More SynthMaster
- Artist Performance Set 18: Songs with Vocals 8
- RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe
Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!
Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!
We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!
Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,640
Posts782,214
Members39,711
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean