|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Feb 2016
Posts: 39
Enthusiast
|
OP
Enthusiast
Joined: Feb 2016
Posts: 39 |
On the final (end) chord, the instrument really "rings" out. Kinda like a bell. I don't want that. I'd like it softer and what I'd call more natural, in line with the tone of my song.
Say I'm using the 827 acoustic strumming rhythm guitar. 113 tempo, waltz. Just this one instrument.
To get the feel and space I want, I decreased the tempo from 113 to 70 for this final bar. The final chord is sounding very well, a final strum, but the longer the bar is, the more the final chord rings, really pronouncing each string, coming off a little harsh. I've tried a Hold, reducing volume slightly, going to zero on reverb. No reverb helps, but...
Is there a way I can soften that strum? I'm playing my guitar over it and it's kinda stepping on my added ending notes that would occur during and after the BIAB guitar chord decays.
Thanks.
(I'm not a literate musician, so pardon me if I'm not using the correct terms.)
2016 BIAB UltraPlusPak HD Windows 8.1 8 GB, 64-bit, 2 TB Focusrite Scarlett 2i2 USB 2.0 Audio Interface M-Audio AV40 Monitors (powered) Zoom R16 Recorder - Interface - Controller
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,582
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,582 |
For a job like this, especially given that it is one instrument, I would record the song and then use an audio editor. Audacity is one that many people use, and it's free. I would apply a reduction in volume and/or a fadeout. One of the reasons this would give you more control is that editing a stereo file can be continuous / gradual (such as on a fadeout), whereas an adjustment you make in BIAB is measure-by-measure.
You could certainly do this job nicely in RealBand, a DAW software program that is supplied for free with BIAB.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2016
Posts: 39
Enthusiast
|
OP
Enthusiast
Joined: Feb 2016
Posts: 39 |
Thank you, Matt.
The moment I hit submit, I thought about RB. I haven't look at it much. I can certain try that, or Audacity, free is nice!, or one of the handful of DAWs I have (and barely understand). I'm getting more comfortable with BB, so thought no harm in asking.
Thanks for taking the time to help me, Matt. Greatly appreciate the input.
2016 BIAB UltraPlusPak HD Windows 8.1 8 GB, 64-bit, 2 TB Focusrite Scarlett 2i2 USB 2.0 Audio Interface M-Audio AV40 Monitors (powered) Zoom R16 Recorder - Interface - Controller
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,582
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,582 |
Anytime; glad it helped you. I too have not spent as much time as I should with RealBand. I know Cakewalk Pro Audio (the forerunner of SONAR) from so long ago, and it's just easier (inertia) to stay with what you know. If I were starting out now, I would absolutely learn and use RealBand.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2009
Posts: 10,881
Veteran
|
Veteran
Joined: Apr 2009
Posts: 10,881 |
On the final (end) chord, the instrument really "rings" out. Kinda like a bell. I don't want that. I'd like it softer and what I'd call more natural, in line with the tone of my song.
Say I'm using the 827 acoustic strumming rhythm guitar. 113 tempo, waltz. Just this one instrument.
To get the feel and space I want, I decreased the tempo from 113 to 70 for this final bar. The final chord is sounding very well, a final strum, but the longer the bar is, the more the final chord rings, really pronouncing each string, coming off a little harsh. I've tried a Hold, reducing volume slightly, going to zero on reverb. No reverb helps, but...
Is there a way I can soften that strum? I'm playing my guitar over it and it's kinda stepping on my added ending notes that would occur during and after the BIAB guitar chord decays.
Thanks.
(I'm not a literate musician, so pardon me if I'm not using the correct terms.) Yup...I have run into that too. You need to move the project to a DAW where you can use envelopes or selective audio editing. Reducing the volume "slightly" often isn't enough. You gotta really cut that volume level by a considerable dB level. Often , you can't just look for that held chord in the song to copy/paste, so you really have to work with it where and as it is. I've had some good success in pulling the volume down to make the chord sound like it actually fits at the end. You must ignore the optics of what you're doing, and what it "looks like" in regards to the look of the envelope or the amount you are reducing the level..... listen with your ears and see if it sounds right. That's what matters the most.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2000
Posts: 12,844
Veteran
|
Veteran
Joined: Dec 2000
Posts: 12,844 |
There is a checkbox to adjust RealTracks "shot" velocity (which I believe affects holds, as well as shots, but could be wrong). You may want to check this setting and adjust accordingly. This is a global setting, so it will affect all RealTracks.
Just a thought.
John Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com (under rehosting/construction)
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,582
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,582 |
Good idea from John. I keep both of mine set to zero (Preferences, RealTracks).
There are also similar checkboxes in Preferences, RealDrums.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2015
Posts: 671
Journeyman
|
Journeyman
Joined: Feb 2015
Posts: 671 |
Thank you, Matt.
The moment I hit submit, I thought about RB. I haven't look at it much. I can certain try that, or Audacity, free is nice!, or one of the handful of DAWs I have (and barely understand). I'm getting more comfortable with BB, so thought no harm in asking.
Thanks for taking the time to help me, Matt. Greatly appreciate the input. I use Audacity for fade ins and fade outs. Only after I have done everything else in RB. In RB I find if I'm going to fade out I save my final mix as XXXfade out.SEQ where XXX is the latest .SEQ name. Then in this copy I go to the end of the recording. Back up about 20 seconds listen to the ending for Ideas. Some times I get the Idea to start fading some of the instruments back before the final fade. Here is how I step down the drums gradually 1)I click about 4 seconds from the end right where there are no drums playing(silent). And select the drum track from there to the end of the song. 2)Go to Edit> Audio Effects > Gain Change and enter -3 and then process. The selected drums Wave form will shrink indicating the amplitude has decreased. 3)Listen to that track (solo) from about 8 seconds to the end. If the fade transition at 4 seconds sounds good and there is no CLICK at the beginning of the fade, do the same thing at 2 seconds from the end of the track, then 1 second. (You can also use bars as your starting point 6 3 2 1) If you hear a click at the beginning of the fade out at 4 seconds from the end that means you chose a starting place in the drum track that had too much sound. Before you Edit > Undo Gain Change. Double click on the drum track which zooms into that track and opens up a window with just the drum track in it. All sound is a sine wave and if you look at the track carefully (expand the wave out, on my machine my mouse wheel does this) You will see points in the track where the wave crosses the center line or there is a clear break in the wave. That is where you want to start a Gain Change. Because there is virtually no sound there. Now go to edit Undo Gain change. In the ZOOM window select a point near 4 seconds to the end (also you can use bar numbers as a guide 6 bars from the end) Find a place where the wave crosses the center line or there is a clear break in the sound wave No Sound. In this zoom window with that point selected Then go back and repeat step 1-3. Practice on drums, then Bass, Piano. I know this sounds difficult but I find its a great way to stop parts at a different place in the ending. Each with a nice fade out. It is destructive but remember this is a copy of your .seq so you can return to the original. If you want to do this to tracks and preserve the original, make a duplicate track of the original and put it on say track 20. If you mess up the track you are working on. Delete the data in the messed up track and duplicate track 20 back to the original track. I've also used this to reduce the volume (gain) of an instrument inside the song, in this case you want to make sure both ends of the gain change are at ZERO AMPLITUDE POINTS. Case in point if you have a cymbal crash that is covering up your vocal (crash is right at the wrong time) Select the entire crash and decrease it by -2 increments until it is the volume you desire. Yes this looks complex, but, it is a great way to clean up peaks and valleys in a track. To boost volume just use positive numbers.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2013
Posts: 8,880
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,880 |
>>> "On the final (end) chord, the instrument really "rings" out. Kinda like a bell. I don't want that. I'd like it softer and what I'd call more natural, in line with the tone of my song." <<<
This happens to me on occasion as well. According to my workflow for that particular project, like others have mentioned, I handle it in a DAW.
Sometimes I'm working on a project that I don't intend to use a DAW and hate to move my project to another program just to take care of the one guitar ringing to loud on a hold.
For those projects intended to be done from start to finish in BIAB, here's how I tame "the ringing hold".
Select the measure (bar) where the ring out occurs.
Open bar settings (F5) and select the offending track.
From the drop down menu, select Fade (per bar)
Select a negative number ( -1 to -127 )
Normally a negative number between -12 to -24 provides satisfactory results for me. But the song will determine where the hold sits best in the overall mix.
If the hold is the last note of the song, the longer the fade out of the song, the more pronounced the guitar fade will be.
If the hold is somewhere in the middle of the song, be sure to use bar settings again in the next measure to return to normal setting for the guitar track.
Some experimentation may be required. For some songs, the fade out placed on the actual measure of the hold is insufficient to tame the hold. In those cases, I use bar settings in the preceding bar to force the fade out to start earlier. In those cases, the negative number is usually a bit lower. ie: -6 or -8 Experimenting will get it sounding right for you and you get to stay in BIAB. Hope this helps.
BIAB 2026:RB 2026, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2009
Posts: 10,881
Veteran
|
Veteran
Joined: Apr 2009
Posts: 10,881 |
Surgical editing... very fun to do and highly useful.
Zooming in to find the zero crossing point of the wave is sometimes not enough, especially if it's in the middle of a note or sound.... you will still have a very abrupt start or end which is just as bad as a click or pop. You can use an envelope in a case like that to also fade in smoothly but quickly as long as the result sounds natural at some level. If it doesn't sound natural..... UNDO it and try again and keep working until you have it sounding natural, or..... go with plan B. You do have a plan B...right?
Most DAW's such as Sonar, will automatically pick the zero crossing for it's edit point. What I look for is the drop to zero point in the waveform..... the in between the notes or vocal phrases point. Easy to see in most cases by simply looking at the track. To place the envelope nodes properly, a bit of zooming helps.
It's a skill that you get better at by doing it. I also use selective "mute" inside a track on a click or a small pop....you can often zoom in enough to see the actual click.... and it's usually just a cycle or two long.... drag a mute across it and apply. The mute happens so fast you never hear it and especially if you have any other tracks playing.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2015
Posts: 671
Journeyman
|
Journeyman
Joined: Feb 2015
Posts: 671 |
Surgical editing... very fun to do and highly useful.
Zooming in to find the zero crossing point of the wave is sometimes not enough, especially if it's in the middle of a note or sound.... you will still have a very abrupt start or end which is just as bad as a click or pop. You can use an envelope in a case like that to also fade in smoothly but quickly as long as the result sounds natural at some level. If it doesn't sound natural..... UNDO it and try again and keep working until you have it sounding natural, or..... go with plan B. You do have a plan B...right?
. Zooming in gives me what I need 95% of the time. I have a lot of experience doing this with Just a Tascam DP03 digital recorder and editing it with Audacity. I don't have the luxury of an expensive DAWs. Plan B is explained within the previous post. You are working with a copy of the .SEQ file. So you can always start over. Also I explained you can duplicate the track you are working with prior to doing any destructive edits and if it fails copy that track back to your working track. I have been successful with this technique to eliminate , drums, bass, piano, guitar, vocal mistakes. Its very difficult to drop into a lead vocal track and dub another word or two. The tone changes are sometimes so noticeable you can frustrate yourself. I would rather fix it by track edits when I can. The changes are so small in time that setting an envelope is quite impossible. When a singer turns their head while recording that slight difference in volume can be corrected. Its much faster to edit the waveform than rerecording an entire track. There is a feature in the zoom window. Play the selected area. I expand the track, pick the part that is the wrong level or one that I want to erase entirely and listen. Then I either reset the gain on that section or ZAP IT all together.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2015
Posts: 671
Journeyman
|
Journeyman
Joined: Feb 2015
Posts: 671 |
Surgical editing... very fun to do and highly useful.
Zooming in to find the zero crossing point of the wave is sometimes not enough, especially if it's in the middle of a note or sound.... In my experience I have not used zero points in the middle of a note. Usually at the beginning or end of a note, the break in a drum track, space between words in a vocal track.. That said, I listen to what I want to edit out or modify several times before deciding what to do. I have been quite successful removing the BREATH sounds before the initial consonants in vocals. I do it to all of my own vocals even though I usually breath in through my nose. However, in the excitement of the studio I do even make breath noises with my nose breathing.  And another thing I edit out is clicking of a singer's teeth, or tongue and lip noise. again 
Last edited by dga; 04/13/16 10:55 AM.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2009
Posts: 10,881
Veteran
|
Veteran
Joined: Apr 2009
Posts: 10,881 |
I don't have the luxury of an expensive DAWs. Is $49 too much for a superb DAW? http://www.pgmusic.com/musiccreator.htmYou need to keep an eye on the Sonar website. Cakewalk has been running a sale on MC7 for months.... unfortunately, it has ended and MC7 is back to it's regular price.... but during the sale it was available for only $20. MC7 is a full featured, fully functional DAW that has lots of bells and whistles to let you work on some pretty intricate aspects of your music. I used the MC series, starting with MC4, for many years. You'd be hard pressed to identify which songs I created in it if you couldn't look at the dates of the songs.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2016
Posts: 39
Enthusiast
|
OP
Enthusiast
Joined: Feb 2016
Posts: 39 |
You guys are incredible...
Hey, I finally opened a song in RB. Dear god...where's that been all my life? The weird endings in BB, worked out fine as-is in RB. Of course, a whole new learning curve to get into, but nice to know it works smoothly...
2016 BIAB UltraPlusPak HD Windows 8.1 8 GB, 64-bit, 2 TB Focusrite Scarlett 2i2 USB 2.0 Audio Interface M-Audio AV40 Monitors (powered) Zoom R16 Recorder - Interface - Controller
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2012
Posts: 21,105
Veteran
|
Veteran
Joined: Jun 2012
Posts: 21,105 |
Yes, RealBand is not all that scary, and it's very powerful. The great feature is to be able to just (re)-generate part of a track instead of the entire track like BiaB does.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2026 for Mac - Special Offers End at 11:59pm PDT on Friday, May 15th, 2026!
Order before 11:59pm PDT on Friday, May 15th and SAVE up to 50% on most Band-in-a-Box® version 2026 for Mac Upgrade packages... and that's not all! With your version 2026 for Mac purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Upgrade to the 2026 49-PAK to receive even more NEW Add-ons including 20 additional RealTracks... that's 222 NEW RealTracks available with version Band-in-a-Box® 2026 for Mac!
Upgrade to Band-in-a-Box® 2026 for Mac® today for as little as $49! Check out the Band-in-a-Box® packages page for all available purchase options.
Learn more about the Free Bonus PAK and 49-PAK here.
If you have any questions about which package is the best option for you, just let us know. We're here to help!
202 New RealTracks Released with Band-in-a-Box 2026!
With Band-in-a-Box® 2026, we've released 202 incredible new RealTracks (in sets 468-488) in a variety of genres—featuring your most requested styles!
Jazz, Funk & World (Sets 468-475):
Our new jazz, funk & blues RealTracks include a groovin’ collection of RealTracks and RealDrums! These include more requested “soul jazz” RealTracks featuring artists Neil Swainson (bass), Charles Treadway (organ), Brent Mason (guitar), and Wes Little (drums). There are new “smooth jazz” styles (4), which include a RealTracks first: muted trumpet, as well as slick new smooth jazz brushes options for drums. Blues lovers will be thrilled—there are more “classic acoustic blues” styles, including guitar (5), bass (4), and drums (10) with blues master Colin Linden, featuring understated and tasty background acoustic soloing, plus brushes drums and acoustic bass. There are also new electric blues RealTracks, including electric blues with PG favorite Johnny Hiland (3) and soulful electric slide guitar from Colin Linden (4). If you love funk & gospel, there are great new options this year, including gospel organ (3) from Charles Treadway, as well as new funk, tango, and rock ’n’ roll drums (3) and bass (1). And for big, bold arrangements, we have uptempo soul horns (4) featuring a three-part hip horn section with options for a full mix or stems of each individual horn — plus an accompanying rhythm section (4) of drums, bass, guitar, and electric piano!
Rock & Pop (Sets 476–482):
Our new rock & pop RealTracks bring a powerful mix of requested favorites, fresh genres, and modern chart-inspired styles! We have more of our popular “Producer Layered Acoustic Guitars (15)” featuring Band-in-a-Box favorite Brent Mason. We’ve continued our much-requested disco styles (10), and added new Celtic guitar (5) with a more basic, accessible approach than our previous Drop-D or DADGAD offerings. There are also highly requested yacht rock styles (17), inspired by the smooth, polished soft-rock sound of the late ’70s and early ’80s — laid-back grooves, silky electric pianos, warm textures, elegant harmonic movement, and pristine production aesthetics. Fans of heavier styles will love our new glam metal (13), capturing the flashy, high-energy sound of ’80s arena-ready guitar rock. We also have a set of rootsy modern-folk rock (18), with a warm, organic sound combining contemporary folk textures and driving acoustic strumming. And we’ve added lots of new modern pop styles (16) — the kinds of sounds you’re hearing on the radio today, featuring exciting new drums, synths, and cutting-edge RealTracks arrangements.
Country, & Americana (Sets 483–488):
Our new country & Americana RealTracks deliver a rich collection of acoustic, electric, and roots-inspired styles! We have new country pop (9) with legendary guitarist Brent Mason. There is also a potpourri (14) of bouzouki, guitars, banjo, and more, perfect for adding texture and character to contemporary acoustic arrangements. We’ve added funky country guitar (5) with PG favorite Brent Mason, along with classic pedal steel styles (5) featuring steel great Doug Jernigan. There are more country songwriter styles (8) that provide intimate, rootsy foundations for storytelling and modern Americana writing. Finally, we have “background soloing” acoustic guitar (12) with Brent Mason — simpler, but still very tasty acoustic lines designed to sit beautifully behind vocals or act as a subtle standalone solo part.
Check out all the 202 new RealTracks (in sets 468-488)!
And, if you are looking for more, the 2026 49-PAK (for $49) includes an impressive collection of 20 bonus RealTracks, featuring exciting and inspiring additions to add to your RealTracks library. You'll get new country-rhythm guitar styles from PG Music favorites Johnny Hiland and Brent Mason, along with modern-pop grooves that capture today’s radio-ready sound! There are also new indie-folk styles with guitar, bass, 6-string bass used as a high-chording instrument, acoustic guitar, and banjo. Plus, dedicated "cymbal fills" RealDrums provide an added layer that work very well with low-key folky styles with other percussion.
The 2026 49-PAK is loaded with other great new add-ons as well. Learn more about the 2026 49-PAK!
2026 Free Bonus PAK & 49-PAK for Band-in-a-Box® 2026 for Mac®!
With your version 2026 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- iOS Android Band-in-a-Box® App
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Mac®!
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,296
Posts802,886
Members40,085
| |
Most Online64,515 Apr 8th, 2026
|
|
|
|
|
|
|
|
|