|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
So after considerable thought I realized I may be mixing my tracks in the wrong order. I'm talking about the stage in my production where I have decided all of my tracks are where I want them, and I will use these specific tracks in the final mix.
Here is the order/workflow I use to build my arrangement.
* Drums, Set level, add effects, revisit level
* Add Bass Set level, add effects, revisit level, Listen to Bass and Drums set relative levels
* Add Rhythm Instruments one at a time
******Set levels individually , add effects, revisit level, Listen to Drums, Bass with the Rhythm instruments
******Audition D,B,R adjust relative levels one last time.
******Render to .wav file, listen and determine if this is a good mix for the Rhythm Section of the song
* if yes go forward
* if not go back to Audition D,B, R (RS)and make adjustments. Possibly change Effects on individual tracks, revisit levels, render and listen again.
* Mix in lead vocals, Audition (solo) lead vocal track(s) add effects, set a good hot level.
***Listen to Rhythm section and Lead Vocals, set Vocal volume relative to RS, vocals should stand out.
*Mix in background Vocals,Set level, add effects, revisit level
*Mix in lead instruments,Set level, add effects, revisit level
*Mix in instrumental solos,Set level, add effects, revisit level
Last edited by dga; 04/22/16 02:09 PM.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
IMO....this is my decades old process. After getting the tracks FX decided on mute all tracks...and in this order of things: 1) Get a good mix with only lead vocal, kick, snare and bass track. (pan at 12:00) 2) Then mix in rhythm tracks for guitar, keyboards, synth pads, etc. (pan accordingly) 3) Then mix in hi-hat, cymbals, toms, percussion, etc. (pan accordingly) 4) Then mix in vocal harmonies. (pan accordingly) 5) Check final mix on various mediums if possible, take notes, remix if necessary. 6) Take an ear break for a day, listen again and repeat (5) until satisfied. 7) Mix at very low volume. I use some old Tascam S1010m's as small near fields at this juncture. If I can hear all tracks and just barely hear the bass axe I'll do a mix. Then I'll listen on my KRK Rockit 8's and push a bit more air around for further analysis. The summed stereo track of all I will have anywhere from -6 to -12 db and I'll master from there. Also...I think it's critical (over time) to actually know your monitors and monitoring environment which can minimize re-mix frustrations. I'm comfortable with my ability to mix to my satisfaction...if only I could feel the same about my voice I'd be sleeping in satin sheets. Of course, personal preference and certain genres may require a different approach. My songs are more rock/country rock so maybe folk, country, EDM is done quite differently. I'm still drinking morning mud so I may have missed a minor point or two and reserve the right to correct any unintentional oversight.  I'm sure others will chime in too and you can use your best judgment from all suggestions. Good luck....hope that helps....carry on.
Last edited by chulaivet1966; 04/20/16 05:08 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2011
Posts: 3,353
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 3,353 |
Hi.
I've been at this for over forty years and one thing I've found is that lots of people are using different methods and each with a lot of success. At the end of the day, you find what works for you and if it sounds good, then it is good.
I personally work in much the same way as you've described, but with one big exception - I never add any effects until the tracks are mixed. This is, in fact, possibly the only thing which almost everyone I've worked with agrees upon. The sound of an instrument in isolation doesn't sound the same as the instrument in the mix and so you won't know if any effects are needed until the balance of the mix is complete.
Other than that, you appear to me to be on the right lines.
ROG.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,678
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,678 |
Mixing tracks:
I throw them all into the DAW at once.... normally about 4 to 8 tracks created in Real Band at the same general time frame.
I add envelopes to all and start with the drums and bass.... EQ, and set beginning levels.
Add rhythm instruments.... EQ and set levels. Pan as needed.
Record a scratch vocal.
Add other instruments....EQ pan and levels with nodes.
Working on production and the finished product from the very start..... add what's missing, remove what's not needed....
refine the mix as I go and add harmony vox and record the lead vox....
Generally, it goes this way.... but nothing is every carved into stone on how I approach the mixing process other than I'm thinking about the end right from the beginning and everything I do is working towards that end.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
IMO....this is my decades old process. After getting the tracks FX decided on mute all tracks...and in this order of things: 1) Get a good mix with only lead vocal, kick, snare and bass track. (pan at 12:00) 2) Then mix in rhythm tracks for guitar, keyboards, synth pads, etc. (pan accordingly) 3) Then mix in hi-hat, cymbals, toms, percussion, etc. (pan accordingly) 4) Then mix in vocal harmonies. (pan accordingly) 5) Check final mix on various mediums if possible, take notes, remix if necessary. 6) Take an ear break for a day, listen again and repeat (5) until satisfied. 7) Mix at very low volume. I use some old Tascam S1010m's as small near fields at this juncture. If I can hear all tracks and just barely hear the bass axe I'll do a mix. Then I'll listen on my KRK Rockit 8's and push a bit more air around for further analysis. The summed stereo track of all I will have anywhere from -6 to -12 db and I'll master from there. Also...I think it's critical (over time) to actually know your monitors and monitoring environment which can minimize re-mix frustrations. I'm comfortable with my ability to mix to my satisfaction...if only I could feel the same about my voice I'd be sleeping in satin sheets. Of course, personal preference and certain genres may require a different approach. My songs are more rock/country rock so maybe folk, country, EDM is done quite differently. I'm still drinking morning mud so I may have missed a minor point or two and reserve the right to correct any unintentional oversight. I'm sure others will chime in too and you can use your best judgment from all suggestions. Good luck....hope that helps....carry on. Thanks, I mix at very HIGH levels, and then listen at medium to low levels, is that wrong? I spend a disproportional amount of time on my Drums and Vocals. I don't have to explain why on the Vocals, but, on the drums in RB imported RD do not have the Kick, Snare, HH, Toms, Cymbals, on separate tracks in a different post I'll explain what I do to compensate for this. It is the only downfall I have had working with RD in RB. SO I apply various effects to isolate these parts.
Last edited by dga; 04/20/16 08:06 AM.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
Hi.
I've been at this for over forty years and one thing I've found is that lots of people are using different methods and each with a lot of success. At the end of the day, you find what works for you and if it sounds good, then it is good.
I personally work in much the same way as you've described, but with one big exception - I never add any effects until the tracks are mixed. This is, in fact, possibly the only thing which almost everyone I've worked with agrees upon. The sound of an instrument in isolation doesn't sound the same as the instrument in the mix and so you won't know if any effects are needed until the balance of the mix is complete.
Other than that, you appear to me to be on the right lines.
ROG. ROG I'm going to try adding the effects after I mix the Drums,Bass, and rhythm.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
Hi. I personally work in much the same way as you've described, but with one big exception - I never add any effects until the tracks are mixed. This is, in fact, possibly the only thing which almost everyone I've worked with agrees upon. The sound of an instrument in isolation doesn't sound the same as the instrument in the mix and so you won't know if any effects are needed until the balance of the mix is complete. Other than that, you appear to me to be on the right lines. ROG. Howdy...I should have been more clear. If you were responding to me....I totally agree. But, unlike myself, it seems many do choose print with FX as with the OP. Personally, I just don't see that approach as a good reference point to mix from. To each their own. I use FX sparingly (vocals/guitar in my case) and it's in the FX bin as an insert...I don't render FX on individual tracks. I, as yourself, mix totally dry. I like a clean mix done in a dead room environment. If you were actually responding to the OP please ignore my comments. Back to it...
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
Thanks, I mix at very HIGH levels, and then listen at medium to low levels, is that wrong? [/quote] IMO..."Wrong"...I would not be so presumptuous to tell anyone that in this context. But...it's not necessary. Mixing at high levels will eventually fatigue the ears and soon enough one will lose sonic perspective. The mix you think was great tonight could sound like canine defecation when you listen again in the morning with fresh ears...just a thought. Plus, getting the bass to sit well in a mix at all levels is one of the toughest goals trying to achieve a good final. Mixing at very low levels initially (as I state above) can mitigate both issues. When you think you have good mix....stand up...get farther from the monitors and push a bit more air with some volume...see what you think. The RB drum tracks are already mixed pretty well. So..if you really need to split some trap set hairs I would just use some EQ to bring out what what you think is missing....as you stated. IE: some crack of the snare, sheen on the hi-hat/cymbals or some distinctive thud on the kick. To qualify my historic perpsective, up until I got BIAB I always used midi drums and having the ability to have separate tracks for the trap set. That's my take on it....back to it.
Last edited by chulaivet1966; 04/20/16 08:42 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
Thanks, 1966
I might clarify a bit, I mix at high levels meaning I will listen to a 3-4 minute song at a high level while working on the. Then listen at low to medium levels to evaluate the mix. Is that going to give me a good mix?
I guess my standard for the sound of Kick Drum is set rather high, running live sound for over 2 decades. I want a real thump from the Kick, I want a snap in the snare. So when I turn the set up these are very live sounding. (I will put another post up on how I do this with RD.) Yes MIDI drums will solve a lot of my problems but I do not have a source for MIDI drums that comes any where near the quality of the samples in PG's RDs.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,367
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,367 |
On the levels issue, I mix at comfortably low levels but frequently turn the volume down until I can barely hear the song. Then, if I can still hear each instrument, I know my mix will work.
Of course, this assumes my equipment, listening room and ears are all in very good order. If they aren't, then experiment how to compensate.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
Thanks, 1966 I might clarify a bit, I mix at high levels meaning I will listen to a 3-4 minute song at a high level while working on the. Then listen at low to medium levels to evaluate the mix. Is that going to give me a good mix? Sure....it "could" give you a good mix....or it could just as easily prolong that goal. I just don't think it's the best approach. I can only emphasize....save your ears and sense of sonic perceptions. Most of us (me inclusive) have sat and mixed for too many hours at a time more than once.....because we're impassioned by the quest for the perfect (for lack of better description) mix. Developing a good, repeatable mixing technique is a time saver. I'm well aware it's difficult to change one's mixing habits with suggestions offered here. Using my approach at mixing at very low levels when I crank the volume to revel in my efforts I'm very close to the mix I'm looking for. The vocals are up front and the bass sits well in the mix at all levels. Only a minor adjustment is about it. I'd suggest to try it just once with a song that's challenging your patience. If you think I wasted your time....I'll buy us a pitcher of Sam Adams...or two. If you actually prefer Hamm's....I know a good therapist. Respectfully submitted.....
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
On the levels issue, I mix at comfortably low levels but frequently turn the volume down until I can barely hear the song. Then, if I can still hear each instrument, I know my mix will work. Yep... That's what I do with my Tascam S1010m's which are tiny near fields about 3' apart and I'm 3' from them. I don't do this mix approach on the KRK's...those are for higher volume and pushing more air. If tha bass line can barely be heard with with some listening concentration I run with that as my first mix. Back to it....
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
Thanks, 1966 I might clarify a bit, I mix at high levels meaning I will listen to a 3-4 minute song at a high level while working on the. Then listen at low to medium levels to evaluate the mix. Is that going to give me a good mix? I'd suggest to try it just once with a song that's challenging your patience. If you think I wasted your time....I'll buy us a pitcher of Sam Adams...or two. If you actually prefer Hamm's....I know a good therapist. Respectfully submitted..... I asked the question not for agreement but for suggestions just like yours 1966. I am in the process of mixing a song with your suggestion in mind. Thanks.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,330
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,330 |
[quote=chulaivet1966][quote=dga] I asked the question not for agreement but for suggestions just like yours 1966. I am in the process of mixing a song with your suggestion in mind. Thanks. Ha...got it. I am trying to help you home in on a successful, repeatable mixing technique without coming off as I'm lecturing anyone....that would suck to be interpreted that way. Keep us informed....especially, what didn't meet your expectation or any epiphany in process that we all can learn from. Carry on.... EDIT: rharv just reminded me of something I forgot to mention. I do some minor EQing prior to first mix also if needed on bass, rhythm axe (for any mid-range mud) and vocals. I sometimes need a 100hz - 200hz cut of about 1-2 db. Thx rharv....
Last edited by chulaivet1966; 04/20/16 01:21 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,406
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,406 |
(my opinion/methods)
/not meant to be a rule for anyone/
I look at mixing like a 2 stage process.
Premix:
EQ is OK but not much else.
Get the bass/drums working together.
Mix in rhythm section with emphasis on rhythm section
^ I say that because at this point I can likely go back and re-EQ bass/drums to fit again.
Take a break.
Mix in other parts using same rules.
Main Mix:
Add a Room EQ in an AUX slot
Readjust the effect(s) and the tracks to fit.
Start working my way through each track, defining them individually. This is *usually* done in the same order (drums,bass,rhythm,leads) but may vary depending on the piece. If it is mainly a vocal solo/piano piece obviously those take priority.
Take a break.
Go back and tinker with Room EQ and then tracks, and then envelopes, and then tracks and then .. seemingly forever.
Eventually call it done (for now)
Revisit a week later and adjust.
To me an important step: revisit again when you notice something.
I still remix stuff for CD's that are long out of production ..
I hear things I've done and think 'this would improve that' .. so I go back and do it over for the experience.
Never stop mixing = never stop getting better at it.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
rharv? can you describe how you add a room effect?
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,406
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,406 |
A light reverb added in the AUX send, meant (usually) to give the separate drum tracks a cohesive sound and bring out a little ringing, then can later add other tracks to the same effect using the AUX slots and the AUX sends in the mixer.
Some times I have two AUXs used; one for drums, one for vocals .. since there will likely be multiple vocal tracks .. Depending on the bass sound I may want to send that to one of the two.
Basically I try to get 'grouping' done .. helps me get started down the road.
The above FX will get adjusted along the way of course.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
I was using different Aux for each track since there are 8 AUX, but pairing them as you do is a good idea.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,406
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,406 |
Can't do that when working on songs with 20+ tracks ... <grin>
If you are doing every track, might as well do it at the track level and use the 'wet/dry' mix in the effect ...
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
OP
Journeyman
Joined: Feb 2015
Posts: 671 |
Have not worked with more than 10 tracks so my HAT is off to anyone who does.
On the vocal and drum tracks I am working with multiple duplicated tracks so I use the same aux in addition to the Track effect.
I have not liked the wet dry mix of PGs reverb, so I choose to have 1 track set to Dry and a Track 100% reverb and mix them together. This allows me to use an envelope on the reverb track to bring in more or less reverb throughout the song.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
Video: New User Interface (GUI)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Watch the video.
You can see all the 2026 videos on our forum!
Introducing XPro Styles PAK 10 – Now Available for Windows Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Windows Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 21.
Video: Xtra Styles PAK 21 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,453
Posts792,131
Members39,888
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean