Originally Posted By: jdchess
Noel,

I got the same result with a few different RealDrums. One example would be NashvilleEven8. I normally use the "Set mix to flat, dry, and center" setting since I am mixing in a DAW. This puts all faders at 90. I can obviously pull this down before rendering, but I'm just curious if I should have to and if other folks notice the same thing.

Thanks for taking a look.


The "Set mix to flat, dry, and center" setting is a timesaving shortcut to quickly remove the volume, panning and effects of the selected style for exported tracks intended for mixing and editing in a DAW so you don't have to manually adjust each individual track. You will almost always need to tweak the volume levels of some tracks to accommodate variations in the recording levels. There are over 2,000 + hours of recorded audio that have been recorded at different times, in different places by different artists on different instruments. Even if you are doing a solo project where you are playing all the instruments and doing midi, you are recording different instruments and different times and will have to balance the levels.

Regardless where the recorded audio track originates, in a DAW studio project or hardware project, the first 'mixing' step should be gain staging the tracks to ensure headroom and avoid clipping as you mix, pan and add effects. Adding effects normally result in adding gain.

Gain staging is a normal recording process.

Charlie

BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.