Well, I'm finally starting to use RB. I have the latest version that came with BiaB 2017. Received wisdom is that, once you've gotten a tune worked up to a sufficient point in BiaB then it's time to bring it in to RB and do the fine tuning/tweaking to the mix there. So, right off, I see that none of my VXTs and DXs have gotten carried along in the switchover. Or at least so far. I've only tried a few tunes yet, so it's still early.
But anyway, I have sorta-kinda figured out how to set up a VST in RB, but what happens is every MIDI device gets the changes, not just the one I want it for. For example, say I'd like to add the DX for reverb to my melody track. So I click on the little "fx" button on the track panel and up pops the DirectX/VST window. I've selected Coyote because I'm just using one of the MIDI voices for now, and then in one of the lower slots I select Reverb. Suddenly everything is Reverby. And I check the fx's on all the other MIDI tracks and they also all have Reverb set up on them. And it is set up identically to the track I originally set it up for. It gets worse if I want to select a VXT. Suddenly every MIDI instrument has this same VST selected.
I don't want this. And even if I did, I'd want to be able to control them independently from each other.
Why is it that something that appears to be so logical and straightforward is anything but? BiaB's been putting me through the ringer and now it's RB's turn. This is getting really old really fast.
Oh, and before composing this note, I looked through all the available help videos here at PG Music on RB, hoping to find at least one that deals with setting up DXs and VXTs. Couldn't find any.
Here's what is catching you. When you use the BiaB tracks you are using a single synth that is shared by all the BiaB tracks.
First step; Use the right-click Track menu to make all the BB tracks regular tracks. This is so they now behave more like RB tracks than BB tracks .. generating and other features will then behave differently. When you open a BiaB file in RB this is necessary to make the tracks behave more like a DAW.
The second step is to go to the desired track. Select it, then go to the right-click menu and select Port. Assign it to a separate VSTi Port (softsynth), then assign another instance of the synth to that track using a different Port (and using the top slot in the resulting options). Now you have 2 separate instances of the same synth being used. All the BB tracks will be assigned to the Default Synth Port, so applying effects to that synth affects all the tracks using that instance of the synth, doing the above step separates them to different instances (and thus different paths).
It all makes sense once you think about it, but this has caught many of us before.
The key is to assign the desired track to it's own instance of a synth so it doesn't affect all the other tracks trying to use the same synth.
Each track goes to a Port That Port can be any hardware or softsynth (16 of each available) The Port assignment sends the track info to the desired path (Port or Output path) In RB the audio FX can be assigned on that path (only if it is a softsynth Port) that affect the audio output of the selected softsynth/Port. If you apply the effect to a synth all tracks are sharing, well they all get to share it. This is sometimes a good thing. If you want it to affect only one track, you can't share that unique path with other tracks. You have to give it its own instance of that synth so it doesn't affect all the other tracks.
Last edited by rharv; 11/15/1702:34 PM.
I do not work here, but the benefits are still awesome Make your sound your own!
Hi rharv and thanks very much for your reply. I'm sorry to report that, at this point, it isn't making much sense to me at all. And I have a DAW background -- Cakewalk Pro Audio and Sonar and more recently PreSonus's Studio One 3. Now, I'll admit that I frequently get confused with Sonar because of its complexity, so I'm not unused to being stumped.
Okay, I made all BB tracks regular tracks. But where you lost me was at the Ports part. I called up a song that I had saved as a .seq file since I was planning on doing a fair amount of work to it in RB. Clicked on the Melody track, which is the first one I'd like to associate with a synth. Did the right click thing and found Port:17>>CoyoteWT<< in the menu bar. Ran my mouse over that and a dropdown appears with 16 Microsoft GS Wavetable Synths, then the >>CoyoteWT<<, which is indicated with a dot, then 16 DXi/VSTi Synths followed by another >>CoyoteWT (Default)<< that has not been indicated. Below that are two more menu choices, which open up their own dropdowns: Load DXi/Vsti Synth into unused Slot, and Load DXi/VSTi Synth into specific Slot. CoyoteWT is selected in both cases.
So what I did was click on one of the DXi/VSTi tracks, which generated a DirectX/VST Window -- a familiar sight at least. So I plugged in what I wanted as far as DX's go, and I was gratified to hear that only the melody instrument was being "affected" by these effects. I went ahead and configured another VST for the melody, but I am using Coyote as a synth for two other instruments, assigning it to a separate track number with each and each is being affected by its effects separately. This is what I was trying to do at the outset. So that's mission accomplished for me. But I don't understand what you have going on by assigning another instance of the synth to that same track. Why?
This may make sense to you, but right now to me, it's about as clear as mud. So I reckon I'll be doing stuff by rote for a while in RB. Till I get a feel for it -- hopefully.
It all depends upon the synth you select. Some synths allow you to connect multiple tracks to them and the instrument played is determined by the channel the track is sending it. Coyote is like this, so you only need to have one instance of it. Cakewalk Dimensions Pro can support of to 4 channels, but is really used for layering up to four sounds. In that case, you would put a separate instance of Dimension on each track (when you do this, you will see Dimension listed on multiple ports). If you selected just one instance of Dimensions on multiple tracks, and changed the instrument assignment, it would apply to all the tracks.
So again, you have to understand the synth you are using and what it expects from the DAW.
For what it's worth, TTS-1, Coyote WT, Coyote Forte, Synthfont, and a handful of others only require a single instance to play up to 16 channels of MIDI data.
Others may and do require separate instances.
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
John, I think you are missing this part; Yes the synth can play 16 channels with different instruments on each .. BUT if all of those 16 channels are assigned to the Default Synth, and you have an Audio Reverb plugin after it (due to the instance of the synth), all of them will have reverb.
The OP wants different effects for different 'Tracks', so these separate Tracks may need separate synth instances.
RB uses 'Ports' to send the signal to a certain Synth/Effect path. If you want different effects for a given track it needs it's own 'Port' assignment (new instance of the synth with different AUDIO FX after it) so the FX only affect that Track.
Example: If Tracks 1-8 are all assigned to a given Port (say the Default synth Port), then putting an Audio Reverb effect after the synth, say in slot 2-4, will affect all the other Tracks using that default Port. This can either save resources or be a hindrance.
To make a given track different, it needs to have its own Port (or path) so the Audio FX that follow that synth instance (or Port) are handled differently.
I suppose a drawing would help (and I think I've posted this before), but the flow is:
Track goes to Port (1 thru 32) Port assigns synth (hardware or software) if MIDI. Or it can select the Audio Out Port, if an Audio Track.
Audio FX follow the synth assigned to the selected Port (if a softsynth/MIDI track).
So selecting a different Port, then assigning a new instance of the desired synth to the new Port creates a new 'path' .. and then you can assign different Audio FX to that path (after that instance of the synth of course) to make them different.
I'll see if I can clarify with images if needed.
I do not work here, but the benefits are still awesome Make your sound your own!
Yes, rharv, that's what I discovered. The Coyote "default" selection results in all tracks getting the same DX sounds. If I assign Coyote to a track then only that track is affected. And that was what I was after, so I'm good now.
John, I'm familiar with Cakewalk's TTS-1 and it behaves sort of similarly in Sonar. It has to be assigned to a specific track. Only difference with it is, if it isn't assigned to a specific track, it doesn't do anything but just sit there.
There's different ways to handle this. I use Sampletank 3. It has a full effects suite so there's none of this going on, if I have a guitar on track 4, channel 4 (I try to keep them the same) ST has it's own guitar cabinet sims and other effects and it only goes on that channel.
The other possibility is to not bother with any effects until you render your midi tracks to audio. Now your audio effects plugins are used. You set up different ones for each track. I know it's fun to keep it all in midi and mess around with stuff but as you're finding out it gets confusing.
You're experienced enough I suspect you've done a few studio sessions over the years. They usually record you dry and feed some effects into your headphones if you need that but the actual recording is dry and unaffected. Adding effects is for the mixdown. The exception was lead guitars, they have their amps and pedals and want that sound on the recording.
But over the last few years I've read that guitarists and bass players use so many sims it changes how recordings are done. Some will not have an amp on stage, they go direct through the PA and/or recording console using an amp sim and they can just push a button and get an entirely different sound without screwing around with amp controls or pedals. The stage or monitor sound is effected but the recording is dry because the engineer and/or the player can mess with all the different sims later. This is exactly why many guitarists on the forum requested DI guitar Real Tracks so now you see lots of them, adding these different amp sims can drastically change the original dry recording.
Of course none of this is written in stone, it's called whatever works for you. But I find it fun to occasionally read some recording forums to get an idea of what's going on lately.
Anyway, after I render my dry tracks to audio I do a Save As so as not to change the original midi or SEQ file in case I want to go back to it.
If Tracks 1-8 are all assigned to a given Port (say the Default synth Port), then putting an Audio Reverb effect after the synth, say in slot 2-4, will affect all the other Tracks using that default Port. This can either save resources or be a hindrance.
Okay, I'm going to have to play with this some. I don't understand why, if the effect comes after the synth sound is generated and is specific to just that track (versus a bus effect) it should effect the synth sounds on the other tracks, just because they are sharing a multi-timbral synth. How is the generated sound from the other tracks getting routed to that effect?
Just trying to understand.
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
You misunderstood my post I think .. what I was trying to say is, if you add an audio effect to any MIDI track using the default synth, all the default synth tracks inherit this .. as the audio going out of the (shared) synth is effected after the synth. So it can't be on one MIDI channel, because that channel comes out of a synth using many channels, and that output is what gets the next effect. Can't separate a MIDI channel after it is converted to a stereo Audio signal.
I do not work here, but the benefits are still awesome Make your sound your own!
Got it. I see what's happening now. But just need to load the same multitimbral synth on different ports and you can use individual effects on each track (just verified it using TTS-1).
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean