I wanted to build my own pc that would help to render BIAB tunes that I create. Where should I invest the money for the biggest bang for the buck? Processor? Skip graphics card? What should the focus be on?
I build all my computers, and their primary function is for music programs especially including BIAB.
The CPU is very important for regenerating RealTracks. Don’t skimp there.
The graphics card is relatively not very important in digital audio.
I highly recommend a SSD boot drive, and put the BIAB program on it. The RealTracks can stay on the supplied USB drive but if you can give them a separate internal hard drive, I recommend that.
Tougher question: RAM. At this time BIAB is a 32-bit program and itself doesn’t benefit from more than 4 GB. However, if you have large software synths BIAB can use JBridge to access more RAM if you have it.
To prevent RFI, I only use wired mice and keyboards for music, and I keep the router away from the PC.
I am careful not to run power cables in parallel with line level or mic cables.
And we haven’t even talked about an audio/MIDI interface outside the box, decent monitors and a room without lots of square surfaces and windows.
Does this help?
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
That is an option, but unless you are truly a pro (meaning your computer you build is how you are going to make money) let me share with you that I just went out and ordered a Dell. After years of hand building with specs and safeguards that in the long run didn't mean much it was just as easy to buy the Dell. Solid state drives are nice and if I had money and desire I would have SSDs in that computer, but for me the primary advantage is boot speed, and I have no reason to care it it take 4 seconds to boot or 4 minutes. Nothing is that urgent for me. I have an i7 with 64 gigs of RAM and a 2tb storage drive for files. Programs live on C: and data lives on D: with thumb drives just for utility. When I work on music downstairs I move them by network anyway. I have never had any issues with RF from the wireless keyboard but I'll take Matt's word for it if he says he has. In my case I am writing songs nobody will ever hear but me and a handful of people here who bother to listen, so I don't care if the wireless keyboard maybe could might possible potentially emit a spurious bit of noise.
My PC with the RAM upgrades, the second drive and updated video card was $1100. I am so out of touch with that world since retiring from IT that I don't even know (or care) if buillding would have been cheaper, more expensive, or the same.
All depends on you, bro. According to your post you have been a member over 2 years and this is your 10th post. I don't know how much you are into music, if it is your means to make a living, if you play with it for 2 hours a month.... I don't know your skill level with computers, so building may be a challenge to you or it may be second nature. Back when I was a gamer I had a water cooled system because I pushed the front end bus of the fastest AMD processor made then to the limits it could be pushed and it ran so hot you could weld with it. That one also had 64gb of RAM and the best ATI video card. That was like 18-20 years ago though. THAT computer you won't buy at Staples... Now I am retired and lazy and refuse to work on computers ever again.
So ask yourself some questions. Is this a money pit that will sit in a spare room or is it going to make money for you to at the very least pay for itself. That's step one on your decision. I have been to houses bigger than my high school where people had obscene amounts of money and wanted these state of the art computers so they could check their AOL email..... LOL
To build off Eddie, I usually go with Dells too. I've been shopping PCs and laptops with them for over 10 years. I usually shop at the Dell Outlet and buy refurbished machines. They have all the warranties of a brand-new machine but were returned for some reasons or other. The prices can be steeply discounted depending on the models and specs you are looking for. I work in IT as well and could build my own machine too but prefer the challenge of finding a machine already built with the features I want.
Steve, do you know if current Dells have slots to add more hard drives or SSDs, plus power and SATA cables or at least ports for them? That was a serious problem the last time I looked under the hood at one.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Hey Matt, my Dell Precision T5400 is an engineering workstation from 2008. I've found better luck with number of power/SATA cables and drive bay on those versus the consumer grade PCs. On the screenshot below you'll find that they separate the good workstations from consumer models with (For Home) or (For Work). I always have gone with the Precisions as I was introduced to them through the office in IT-land. I knew they were bulky and tough workhorses from supporting and maintaining them in the work environment. Of course a Dell Precision Workstation will cost you a bit more than the consumer (home) models but you have an awesome machine for music, video, or whatever challenge you throw at it. The newer version of my machine is the 5810 and 5820. I've got upgrades maxed out on my machine, 32 Gig Ram, Dual Quad Core Xeon processors (8 logical cores) and a beefed up video card. I should still be good for another couple of years before I get a newer machine. I also use this machine to render 4K HD video and flight simulation. Hope that helps!
NP. Once you see what models you may want, then pop over to the Dell Outlet store. Available PCs change on a daily basis. I just saw 2 5810s one loaded with an 8 core processor and the other with a 12 core. Each PC was marked down over 50% from their original price.
Thank very much for the responses everyone. I’m taking notes on all of your comments. You guys confirmed what I was thinking. I do make a living from music and wanted the BIAB program to load faster and render to mp3 faster. I figured it wasn’t the graphics card, but the processor. I do live in Florida so cooling is going to be a factor. I hadn’t considered Dell, but I’ve looked into many YouTube videos on how to build a pc. My laptop is struggling a bit. It’s a refurbished Windows 10 running the latest BIAB. I’m probably looking at the 1,500-2,000 range.
I wanted to build my own pc that would help to render BIAB tunes that I create. Where should I invest the money for the biggest bang for the buck? Processor? Skip graphics card? What should the focus be on?
Thanks!
-Andrew
This is the best way to do home recording.... build or buy a machine that will be dedicated to the music.
I've used both with good results. The important part is to have a really nice USB interface. That's the sound card. You really don't want to try to use the soundcard in the computer.
Most computers today are more than sufficient and powerful enough to do everything you need. Just use a good interface and you'll be just fine.
I have a Dell laptop that I used for several years with a Focusrite interface and it did an amazing job. Later, well, it's been over 10 years ago now, I built a custom DAW with the i5 Intel chip and running XP pro 32bit. That machine is still running rock solid and it now uses the Focusrite interface that was on the Dell. The benefit to the custom build was it didn't come from the factory loaded with bloatware and unnecessary software taking up drive space.
I keep my main DAW totally off the internet. As a result, I don't get surprise updates that screw up my configuration.
But yeah.... I think you'll be fine with either a build or an off the shelf machine. Put the focus on the interface, the speakers you monitor with , and some good software besides PG's fabulous stuff.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean