Originally Posted by Gordon Scott
Originally Posted by Simon - PG Music
Directional cables exist and can be beneficial. Consider ground loops - lifting ground at one end of the cable can remove the ground loop, but in some cases there can be a measurable reduction in noise having the lifted end at one end vs the other end.
The observation is sound, but "directional cables" are not implicated. You could reverse a "directional cable" end-for-end, repeat that test, and the outcome would be the same, all other things equal.
…

Since Simon didn’t quite explain what a true diretlional cable is, only their use, your answer is incorrect.

Directional cables have nothing to do with the stereo store boutique cables scam where the flow of electrons is somehow important. If it were, your answer would have been right.

Actual directional cables are balanced cables with a shield disconnected at one end and are used for the purpose Simon mentioned—to break up ground loops and reversing the direction renders that function ineffective. They are often spec’d in broadcast and TV studios where their use is necessary to solve problems (I used to have a Class 1 FCC License) as well as other installations. You can even buy instrument cables with that design—the shield is connected at the amp—but I’ve never found a situation where one actually lowered the noise floor. They were a fad in the late 1970s using Belden blue cable that turned out to be way too fragile for use as guitar cables.

BIAB 2025 Audiophile Mac
24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia, M1 MBAir, 2012 MBP
Digital Performer11, LogicPro, Finale27/Dorico/Encore/SmartScorePro64/Notion6 /Overture5