I found an very old post regarding this problem but it didn't really have a resolution. I have latest BIAB and up-to-date Win 11 Pro. Keyboard works fine but sustain pedal (going through Channel 1, CC Type #64 Sustain Pedal, Variable range 0-127) is not operative. Need suggestions on how to trouble shoot and get this working. Thanks
If you start the MIDI Monitor in BIAB, play a few notes on your keyboard, you should see them added to the list. This would also work for your sustain pedal. If there is response from the keyboard but not the sustain pedal, I would suspect the pedal itself, or the connection from the pedal into your keyboard.
What model keyboard are you using?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Hate to beat a dead horse, but AT is on to someting regarding the midi monitor. Combine that with the fact that mine works fine I thought I would first show my midi monitor below. Now if yours is the same as mine than your problem is in the configuration of Options-midi/audio driver Setup. I have shown that on my system also below. [img]https:/[img]https://www.pgmusic.com/forums/ubbthreads.php?ubb=download&Number=30374&filename=Screenshot 2025-03-05 140620.jpg[/img]/www.pgmusic.com/forums/ubbthreads.php?ubb=download&Number=30375&filename=Screenshot 2025-03-05 141232.jpg[/img]
Jimi, click on record R and then click on filter. If CC 64 is not checked it will not record your sustain pedal. It must be checked to record CC64. The picture shows my unchecked setting, this I can not record CC64. Note that I do not record in BiaB so this is not a problem for me.
When you are at the checkout line and they ask if you found everything say "Why, are you hiding stuff?"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
When I switch to ASIO my keyboard goes silent. What happens when you switch to MME.
And by th e way, Maro has a good point. Even though I don't record in BIAB, I do have that check box checked in the Midi Record window. So that may explain why mine is working when I simply play the piano.
What instrument patch are you using? Not all instruments can deliver 'sustain'. If you change the instrument patch to a 'Piano', does the sustain function work then?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
What instrument patch are you using? Not all instruments can deliver 'sustain'. If you change the instrument patch to a 'Piano', does the sustain function work then?
It would be great to hear back from the O/P with a little more detail on the latest status.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Sorry, been out of town today. I have attached 2 files regarding patches. Where is the CC64 option. I can't find it now, jeez. Regarding factory reset are you saying full on everything factory reset? If so I have half a notion to just do a total reinstall but this time not install RealBand since I don't use it (use CuBase). I think I covered everyone
GOT IT! Started following all the patches. Turns out, on the VST instrument that I am using for piano (Arturia Piano V2) there is a MIDI config option that was sending sustaing through 128 and not 64. Thank you everyone for you help. You guys led me to the answer!
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.