That's a great observation. It seems to me that there should be cross polination between the two MIDI event editors. The RealBand editor should gain the ability to filter events (as is available in BIAB), and the BIAB editor should gain the ability to select all tracks (not just soloist and melody). Since you can freeze tracks in BIAB and then make editing changes (for example, in the piano roll editor), why not allow similar editing in the event list editor as well.
Of course, once you unfreeze, the part gets re-generated, which in my mind then would lead to needing a flag indicating that you have made event edits, so that if you try to unfreeze, you get a warning that your edits will be lost.
This sounds like a good idea for the wishlist.
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
Try to avoid the mistake of thinking that because both programs can use BiaB styles and such, that they should be identical in operation. There are good reasons for the differences.
Besides that, if both programs were identical in operation, why have two?
RealBand lays the whole thing out along the timeline.
Band in a Box does not, relying on repeats, choruses, etc.
So the MIDI editing is done differently, and I can see that this method is more flexible / powerful, but that doesn't change the items displayed in the Event List. The user still sees ALL MIDI events, regardless of what items are selected / de-selected in the Data Filter? Have I got that correct? Appreciate your help Cheers Trevor
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
You could route MIDI out to MIDI-OX, filter there then onto the softsynth, external module, or another PC DAW/sequencer (or external sequencer/recorder) to re-record the MIDI traffic, sans MIDI events x,y,z, pitch bends, etc.
With some clever MIDI channel re-mapping and a multi-port utility like Loopbe30 it might be possible to re-recorded BACK INTO same RB/PTPA: "bad MIDI" goes out one channel it comes back FILTERED on another and is recorded in RB/PTPA. I've never tired it sinc I've never needed to do it (I use other programs or external HW if needed).
And while not exactly the same thing with some re-routing - recapture, RB and PTPA have a MIDI monitor utility with a built in filter .dll that can be run under "Action -> Select .exe. or .dll"
Larry
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
Try to avoid the mistake of thinking that because both programs can use BiaB styles and such, that they should be identical in operation. There are good reasons for the differences.
Besides that, if both programs were identical in operation, why have two?
RealBand lays the whole thing out along the timeline.
Band in a Box does not, relying on repeats, choruses, etc.
--Mac
Hi Mac, yep I understand the differences, but my question was just related to the display of MIDI data and filters, not so much styles or how BiaB handles styles differently to RB, repeat choruses, or what gets sent to the MIDI port.
I really was only looking for how viewing filters could be used for example to only list note events, or only list control events, or only list program change events in the viewer display.
Such a viewing filter can then be used to list all events of the same type together, allowing more effective viewing of where certain events occur, without having to wade through tons of other MIDI Event data to find specific control events etc.
It's not a BiaB vs RB thing. IMO such a display filter has very practical purposes.
Last edited by VideoTrack; 01/17/1412:53 PM. Reason: Unacceptable misuse of the acronym "MIDI"
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
(Its bad enough that so many persist in using the word, "interface" to describe pieces of hardware... )
I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". I must type "MIDI". ...
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Sorry to interupt. I am new to BIAB and maily use it to get and practice music on clarinet. I have been looking at the piano roll window and can understand the one for notes. Can anyone explain in simple terms what the lower panel does. e.g what does the height of an event signify? What is velocity? How do you change pitch, duration, velocity etc. Does the lower panel reflect what is done in the upper panel. Finally I get the impression that the lower panel is for MIDI control. Is this correct?
If this is not the right part of the forum to get answers to this can you please direct me gently to the correct section of the forum.]Thanks in advance.
Sorry to interupt. I am new to BIAB and maily use it to get and practice music on clarinet. I have been looking at the piano roll window and can understand the one for notes. Can anyone explain in simple terms what the lower panel does. e.g what does the height of an event signify? What is velocity? How do you change pitch, duration, velocity etc. Does the lower panel reflect what is done in the upper panel. Finally I get the impression that the lower panel is for MIDI control. Is this correct?
If this is not the right part of the forum to get answers to this can you please direct me gently to the correct section of the forum.]Thanks in advance.
Hi Madsy, and a big welcome to the forums!
The lower section of the piano roll window has several purposes, but its most common purpose is the show note "velocity". However, other MIDI data types can be displayed, and filters may be selected to show events for that specific data type. You can think of velocity as the loudness of a note. Think of playing a piano softly (piano) or loudly (forte) - the hammer strikes the strings with more velocity when played forte.
The notes may be dragged up/down to change pitch, or left right to change position. The velocity may be adjusted by selecting the note in the top window, and looking for the corresponding highlighted velocity value directly below it in the bottom window, then position the mouse cursor at the top of the vertical line, and click/hold drag up/down. Press Help on the page for a lot more detail.
You can always start a new post to start a new thread in any of the available Forum topics.
Some visual samples below, that might assist to illustrate: Hope this answers your question satisfactorily. Cheers Trevor
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Many thanks Trevor. I'm not sure I will use MIDI. I do have the capability and the instruments including 4 keyboards (Roland Kurzweil etc) belonging to my son who lives overseas.
My interest is more in wind instruments altho, come to think of it, I do have an EWI4000 which has MIDI. I might give that a go. Cheers
Many thanks Trevor. I'm not sure I will use MIDI. I do have the capability and the instruments including 4 keyboards (Roland Kurzweil etc) belonging to my son who lives overseas.
My interest is more in wind instruments altho, come to think of it, I do have an EWI4000 which has MIDI. I might give that a go. Cheers
Hi Madsy
If you are performing any tasks using the piano roll, you are probably essentially using MIDI data.
If you have any external instruments that connect to your Band In A Box / Real Band computer, through a 5 pin DIN cable (similar to the image below), you are most likely using MIDI.
MIDI is good, flexible, and easy to use.
You can also use Real Tracks and Real Drums - which are internal pre-recorded audio tracks - instead of MIDI, or you can use these alongside MIDI data to complement your arrangements. The system is extremely flexible.
MIDI is not actual music sounds. Simplistically, MIDI is a series of commands from Band In A Box to an external synthesizer to tell it what notes to play, how loud to play, how long to play etc.
Don't be afraid of MIDI, it's just a way that the system uses to make musical devices work together. You don't need an understanding of the internal technologies for you to make this to work.
Don't be afraid to explore the power and features that the system provides.
This Forum consists of a great team of experts who all assist each other.
Cheers
Trevor
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
The PianoRoll cc editor can also be used on any Audio Track as well.
There typically won't be any Note Data there, but you can indeed invoke some of the MIDI cc's, such as cc7 - Volume or cc11 - Expression on an Audio Track using the PianoRoll.
Of course, with the advent of the new Volume Node Automation in RB2014, we can now draw Volume Nodes right underneath an Audio Track in Tracks View, which is the easier way to invoke these now.
The OP on this might be better served to hook up both MIDI and Audio output of one of those keyboards or even the WIDI and chooswe to Record Both at Once.
That can be a great way to be able to correct mistakes, as the MIDI Recorded Track easily allows for Deleting Notes, Changing Notes, etc. in the event of a mistake, whereas editing Audio track can only allow one to slice and dice, predominantly.
One important thing to notice: in Piano Roll you can enter CC11 (Expression) on an audio track, which is nice. Then you can set the track overall volume with CC7 and then adjust down from there when you need to, using CC11.
My personal opinion on Nodes is they should control CC11, not CC7. Then the track slider (CC7) would control the overall volume, but the Nodes would still work in conjunction with the volume slider. More intuitive flexibility that way.
The only downside (or a plus in some eyes) is the track slider doesn't move with the CC11 (node) changes ..
Last edited by rharv; 01/19/1411:30 AM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
The above conversation gives me a headache! I though CC7 and CC11 were related to CCR ?!?!?
Lenovo Win 10 16 gig ram, Mac mini with 16 gig of ram, BiaB 2022, Realband, Harrison Mixbus 32c version 9.1324, Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app, Komplete 49 key controller.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.