PG Music Home Forums PG Music Product Forums Band-in-a-Box for Windows How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar?

Index

Print Thread

Go To

How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? #777139 09/28/23 11:35 PM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	OK, I don't know how to word it in the Subject box, but this is what I'm trying to do. 1st bar for 2 counts has Em... then for the rest of the 1st bar (IE, for the remaining 2 counts) it has Dm... meaning sustain the Em for 2 counts, the sustain the Dm for 2 counts, now the problem here is I have a 2 bar intro, the 1st bar has those sustained chords, but I want to be able to keep the Dm sustained throughout the 2nd bar but start the drum fill too, now, here's the dilemma on the 2nd bar:- 1.....Using Dm.d will silence the chord and play the drums. 2.....Using Dm..d Will stuccato the chord and play the drums. 3.....Using Dm...d will replay the sustained chord and play the drums. I don't want Dm to repeat after the first bar, I just want the Dm to continue being sustained into the 2nd bar and the 2nd bar would trigger the drum fill for the start of the rest of the tune. EG Bar 1--------------Bar 2 1----2----3----4 - 1----2----3----4 Dm...-----Em...-----Drum Fill with Em still sustained without sounding again. Text formatting is not very good in this box, for tabulation I have to replace spaces with -. Last edited by usalabs; 09/28/23 11:41 PM.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777152 09/29/23 02:06 AM Band-in-a-Box for Windows
Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY	I’m not at a computer to give you exact steps, but there is something you can experiment with: freezing a track or tracks when you want shots, holds, or silence to affect some tracks but not others. For example, use the dots to get the drum track that you want, then freeze that track. Now alter the use of the dots to get the rest of the tracks to play what you want. Or reverse that - depends on what you want to do which way might be easier editing. BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? Matt Finley #777194 09/29/23 09:31 PM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	Freezing only freezes the enter track, IE, if I hit the snowflake for that instrument track (no matter how many chorus or repeats there are), the entire song's instrument is frozen, freezing doesn't freeze bars. Have a look at this screenshot, you'll notice the first 2 bars as the intro, the first bar's 4 count has 2 sustained chords, but the last sustained chord (Dm) I need to carry over to the 2nd bar but without playing that chord again, but the 2nd bar would trigger the drum fill, atm, the 2nd bar has a Dm.d which kills the chord and only playes the drums fill, which I don't want, just imagine on a guitar, hit an Em for 2 counts then a Dm for 2 counts for the first bar, but let the Dm sustain for 4 counts starting the second bar while the drummer would do a fill without the guitar hitting that same chord again, so in reality, the guitar is sustaining Dm for 6 counts. Describing what I'm looking for is super hard when trying to explain in text. Attached Files (Click to download or enlarge) (Only available when you are logged in) BIAB Screenshot.png (92.62 KB, 161 downloads)

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777197 09/29/23 10:15 PM Band-in-a-Box for Windows
Joined: Jun 2012 Posts: 21,130 Melbourne, Australia AudioTrack Veteran
AudioTrack Veteran Joined: Jun 2012 Posts: 21,130 Melbourne, Australia	You might achieve what you want by using Utility Tracks and cutting/pasting audio into the relevant bars. What version of BiaB are you running. Utility tracks became available a couple of years ago. BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777200 09/29/23 11:49 PM Band-in-a-Box for Windows
Joined: Jan 2015 Posts: 2,681 Hampshire, UK Gordon Scott Veteran
Gordon Scott Veteran Joined: Jan 2015 Posts: 2,681 Hampshire, UK	As ever I'm on the wrong platform to try this, but this looks like it may be worth experimentation... From the manual page 112, near the bottom: Quote: Type a chord with a break followed by a number (N), and this will copy the break for the next N bars. e.g. C7...4 will enter held chords for 4 bars. Gm7...bd5 will enter held chords (bd=except bass and drums) for 5 bars The usual function of BIAB is to end the hold when the next chord symbol appears, which is what's breaking your attempt. Hopefully what's shown above will honour the x-bars even with another chord. Another possibility might be to mute or otherwise turn off the drum track in the first bar, but mute (e.g., via F5) can be a bit brutal. Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2026 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777207 09/30/23 02:33 AM Band-in-a-Box for Windows
Joined: Jun 2012 Posts: 21,130 Melbourne, Australia AudioTrack Veteran
AudioTrack Veteran Joined: Jun 2012 Posts: 21,130 Melbourne, Australia	One thing of interest is exactly what instruments do you want to sustain? Organ, Brass, Woodwind, and Bowed instruments lend themselves to this. Piano, Guitar and similar instruments - not so much. They have a natural decay. Is a gradual decay allowable? BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? AudioTrack #777210 09/30/23 03:10 AM Band-in-a-Box for Windows
Joined: Dec 2003 Posts: 24,951 Hamlin NY MarioD Veteran
MarioD Veteran Joined: Dec 2003 Posts: 24,951 Hamlin NY	Assuming there is no natural decay here is what I would do. 1-mute the drum track 2-get the instruments to play like you want using the hold settings,that is Bar 1--------------Bar 2--------------Bar 3 1----2----3----4 - 1----2----3----4 - 1...etc Dm...-----Em...-----------------------C 3-freeze all tracks except the drum track 4-unmute the drum track 5-add your fills where you want them That should work. Let us know how you make out. Last edited by MarioD; 09/30/23 03:11 AM. Life is short so make sure you spend as much time as possible on the Internet arguing with strangers. 64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? AudioTrack #777356 10/02/23 10:02 AM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	Originally Posted By: AudioTrack You might achieve what you want by using Utility Tracks and cutting/pasting audio into the relevant bars. What version of BiaB are you running. Utility tracks became available a couple of years ago. I'm using 2023 version, I opted to only show active tracks and hide inactive ones, when I click on the eyeball, I can see all the utility tracks.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777361 10/02/23 11:27 AM Band-in-a-Box for Windows
Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY	The method Mario detailed is what I had suggested. Have you tried it? BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? Matt Finley #777365 10/02/23 12:45 PM Band-in-a-Box for Windows
Joined: Dec 2003 Posts: 24,951 Hamlin NY MarioD Veteran
MarioD Veteran Joined: Dec 2003 Posts: 24,951 Hamlin NY	Originally Posted By: Matt Finley The method Mario detailed is what I had suggested. Have you tried it? I apologize Matt. I had forgotten that you suggested this. Life is short so make sure you spend as much time as possible on the Internet arguing with strangers. 64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #777368 10/02/23 01:09 PM Band-in-a-Box for Windows
Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY	No, no - you gave the steps to try. I wasn't at a computer. Thank you! BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? Matt Finley #778551 10/12/23 07:14 AM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	Originally Posted by Matt Finley The method Mario detailed is what I had suggested. Have you tried it? I did try it, but it didn't work, have a look at this screenshot, notice the 4 bars as the intro, the first bar has c... to sustain all instruments that are sustainable, (drums don't sustain as they are only a one shot), for the 4 bars (16 count at 4/4), but on the 4th bar during the sustain, I want to trigger the fill for the start of the 5th bar, I know BiaB stops any sustains after the 4th bar that's fine, but usually I use something like c.d to trigger the fill, but doing so will kill the sustain. It's hard to explain in a post, try this, all sustained instruments from bar 1 would sustain for a count of 16, but stop after the 16th count, that's fine, but on the 12th count while the instruments are still being sustained, trigger the drum fill, without stopping the sustain until the end of the 4th bar. Attached Files (Click to download or enlarge) (Only available when you are logged in) BIAB-Drum-Fill.png (122.75 KB, 85 downloads)

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #778558 10/12/23 07:53 AM Band-in-a-Box for Windows
Joined: Sep 2001 Posts: 2,149 Essex England Bob Calver Veteran
Bob Calver Veteran Joined: Sep 2001 Posts: 2,149 Essex England	if you can get the sutain you want, forget about the drums for a minute. open the file in RB and then cut and paste a drum fill where you want it on a spare audio track. erase any drums you don't want in early bars on the original drums track.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #778560 10/12/23 08:10 AM Band-in-a-Box for Windows
Joined: Dec 2003 Posts: 24,951 Hamlin NY MarioD Veteran
MarioD Veteran Joined: Dec 2003 Posts: 24,951 Hamlin NY	It works here, see below. https://www.dropbox.com/scl/fi/f24rlwkyfa8s2wljksefx/demo.SGU?rlkey=9v840a17ichnu11sv72ssusp2&dl=0 Try this: Assuming there is no natural decay here is what I would do. 1-get the instruments to play like you want using the hold settings,that is Bar 1--------------Bar 2--------------Bar 3 1----2----3----4 - 1----2----3----4 - 1...etc Dm...-----Em...-----------------------C 2-generate the song. 3-freeze all tracks 4-unfreeze the drum track 5-add your fills where you want them 6-generated the song - note this will only generate the drum track and not the frozen tracks Life is short so make sure you spend as much time as possible on the Internet arguing with strangers. 64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? MarioD #778613 10/13/23 01:31 AM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	Originally Posted by MarioD It works here, see below. https://www.dropbox.com/scl/fi/f24rlwkyfa8s2wljksefx/demo.SGU?rlkey=9v840a17ichnu11sv72ssusp2&dl=0 Try this: Assuming there is no natural decay here is what I would do. 1-get the instruments to play like you want using the hold settings,that is Bar 1--------------Bar 2--------------Bar 3 1----2----3----4 - 1----2----3----4 - 1...etc Dm...-----Em...-----------------------C 2-generate the song. 3-freeze all tracks 4-unfreeze the drum track 5-add your fills where you want them 6-generated the song - note this will only generate the drum track and not the frozen tracks Yay, you hit that nail right on the head. I loaded your sgu file, and that's just what I was looking for, but to do that during the song creation won't work, but, I figured out that I would need to create a complete song first, generate the song for the first time, then freeze all tracks except drums, then add fills where I want them, then add the C.d on the 4th bar, re-generate, then freeze drums, so that all tracks are then frozen, I tried this with the song I was creating (the screenshots posted here), and it worked. Thanks MarioD

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #778636 10/13/23 07:11 AM Band-in-a-Box for Windows
Joined: Dec 2003 Posts: 24,951 Hamlin NY MarioD Veteran
MarioD Veteran Joined: Dec 2003 Posts: 24,951 Hamlin NY	I'm glad you got it working. Actually it was Matt's suggestion, all I did was give you the step by step method to accomplish it. You should mark this thread as resolved. Life is short so make sure you spend as much time as possible on the Internet arguing with strangers. 64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #778645 10/13/23 08:45 AM Band-in-a-Box for Windows
Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY	Thanks, Mario, for giving the details. I often answer questions when I'm not at a computer, and I hope that people like you will give the specifics if you see it before I can do so. We have seen a lot of variations on this question. This would make a good topic for the Tips and Tricks Forum, don't you think? If you agree, could you post something there? BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? MarioD #778675 10/13/23 12:42 PM Band-in-a-Box for Windows
Joined: Dec 2009 Posts: 21 U usalabs OP Enthusiast
OP usalabs Enthusiast U Joined: Dec 2009 Posts: 21	Originally Posted by MarioD I'm glad you got it working. Actually it was Matt's suggestion, all I did was give you the step by step method to accomplish it. You should mark this thread as resolved. I would mark it as solved, if there was an option to do so, I don't see any buttons or links that say 'Mark as solved' anywhere on this thread page. Usually on other support forums there's a button that says "Reply and mark as solved", but there isn't one. Last edited by usalabs; 10/13/23 12:44 PM.

Re: How do I sustain a chord for 6 counts and have the drum fill on the start of the next bar? usalabs #778683 10/13/23 02:11 PM Band-in-a-Box for Windows
Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,628 Hudson Valley & Lake George NY	It’s there. You have to go back to your first post at the top of this thread. That post has the option called Mark as Resolved. BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Go To

Moderated by Andrew - PG Music, Callie - PG Music, Catherine, Jeff Yankauer, PeterGannon, pgmoderation

Link Copied to Clipboard

ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News

May 31, 2026

Last Chance! The Band-in-a-Box® 2026 for Mac® Special Ends Today (May 31, 2026) at 11:59pm PDT!

Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Mac® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PDT today!

We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Mac®!

Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.

Another exciting new addition is the amazing new AI-Notes feature, which can transcribe polyphonic audio into MIDI. View the results in notation or play them back as MIDI, and choose whether to transcribe an entire track or transcribe specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Mac®.

There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!

Upgrade your Band-in-a-Box for Mac® to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!

Plus, when you order your Band-in-a-Box® 2026 Mac upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.

If you need any help deciding which package is the best option for you, just let us know. We are here to help!

May 19, 2026

Band-in-a-Box® 2026 Mac Special Offers Extended Until May 31st!

Good news- we've extended our Band-in-a-Box® 2026 for Mac® special offers until May 31, 2026!

Band-in-a-Box® 2026 is packed with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can transcribe an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!

There are over 100 new features in Band-in-a-Box® 2026 for Mac®.

When you order purchase Band-in-a-Box® 2026 before 11:59 PM PDT on May 31st, you'll also receive a Free Bonus PAK packed with exciting new add-ons.

Check out the Band-in-a-Box® for Mac packages page to find the best package for you.

May 15, 2026

Holiday Weekend Hours

It's Victoria Day Long Weekend in Canada. Our Customer Service hours are:

Saturday, May 16: Closed
Sunday, May 17: Closed
Monday, May 18: 8:00am - 4:00pm

Regular hours resume Tuesday, May 19th!

May 15, 2026

Today's the Last Day of the Band-in-a-Box 2026® for Mac Special!

Order before 11:59pm PDT today (May 15, 2026) to save up to 50% off your Band-in-a-Box® 2026 for Mac® upgrade and receive a FREE Bonus PAK loaded with great new Add-ons to use with this new version!

Don't wait - order today!

Check out all the new features in the redesigned Band-in-a-Box® 2026 for Mac®!

May 13, 2026

Band-in-a-Box® 2026 for Mac - Special Offers End at 11:59pm PDT on Friday, May 15th, 2026!

Order before 11:59pm PDT on Friday, May 15th and SAVE up to 50% on most Band-in-a-Box® version 2026 for Mac Upgrade packages... and that's not all! With your version 2026 for Mac purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Upgrade to the 2026 49-PAK to receive even more NEW Add-ons including 20 additional RealTracks... that's 222 NEW RealTracks available with version Band-in-a-Box® 2026 for Mac!

Upgrade to Band-in-a-Box® 2026 for Mac® today for as little as $49! Check out the Band-in-a-Box® packages page for all available purchase options.

Learn more about the Free Bonus PAK and 49-PAK here.

If you have any questions about which package is the best option for you, just let us know. We're here to help!

May 13, 2026

202 New RealTracks Released with Band-in-a-Box 2026!

With Band-in-a-Box® 2026, we've released 202 incredible new RealTracks (in sets 468-488) in a variety of genres—featuring your most requested styles!

Jazz, Funk & World (Sets 468-475):
Our new jazz, funk & blues RealTracks include a groovin’ collection of RealTracks and RealDrums! These include more requested “soul jazz” RealTracks featuring artists Neil Swainson (bass), Charles Treadway (organ), Brent Mason (guitar), and Wes Little (drums). There are new “smooth jazz” styles (4), which include a RealTracks first: muted trumpet, as well as slick new smooth jazz brushes options for drums. Blues lovers will be thrilled—there are more “classic acoustic blues” styles, including guitar (5), bass (4), and drums (10) with blues master Colin Linden, featuring understated and tasty background acoustic soloing, plus brushes drums and acoustic bass. There are also new electric blues RealTracks, including electric blues with PG favorite Johnny Hiland (3) and soulful electric slide guitar from Colin Linden (4). If you love funk & gospel, there are great new options this year, including gospel organ (3) from Charles Treadway, as well as new funk, tango, and rock ’n’ roll drums (3) and bass (1). And for big, bold arrangements, we have uptempo soul horns (4) featuring a three-part hip horn section with options for a full mix or stems of each individual horn — plus an accompanying rhythm section (4) of drums, bass, guitar, and electric piano!

Rock & Pop (Sets 476–482):
Our new rock & pop RealTracks bring a powerful mix of requested favorites, fresh genres, and modern chart-inspired styles! We have more of our popular “Producer Layered Acoustic Guitars (15)” featuring Band-in-a-Box favorite Brent Mason. We’ve continued our much-requested disco styles (10), and added new Celtic guitar (5) with a more basic, accessible approach than our previous Drop-D or DADGAD offerings. There are also highly requested yacht rock styles (17), inspired by the smooth, polished soft-rock sound of the late ’70s and early ’80s — laid-back grooves, silky electric pianos, warm textures, elegant harmonic movement, and pristine production aesthetics. Fans of heavier styles will love our new glam metal (13), capturing the flashy, high-energy sound of ’80s arena-ready guitar rock. We also have a set of rootsy modern-folk rock (18), with a warm, organic sound combining contemporary folk textures and driving acoustic strumming. And we’ve added lots of new modern pop styles (16) — the kinds of sounds you’re hearing on the radio today, featuring exciting new drums, synths, and cutting-edge RealTracks arrangements.

Country, & Americana (Sets 483–488):
Our new country & Americana RealTracks deliver a rich collection of acoustic, electric, and roots-inspired styles! We have new country pop (9) with legendary guitarist Brent Mason. There is also a potpourri (14) of bouzouki, guitars, banjo, and more, perfect for adding texture and character to contemporary acoustic arrangements. We’ve added funky country guitar (5) with PG favorite Brent Mason, along with classic pedal steel styles (5) featuring steel great Doug Jernigan. There are more country songwriter styles (8) that provide intimate, rootsy foundations for storytelling and modern Americana writing. Finally, we have “background soloing” acoustic guitar (12) with Brent Mason — simpler, but still very tasty acoustic lines designed to sit beautifully behind vocals or act as a subtle standalone solo part.

Check out all the 202 new RealTracks (in sets 468-488)!

And, if you are looking for more, the 2026 49-PAK (for $49) includes an impressive collection of 20 bonus RealTracks, featuring exciting and inspiring additions to add to your RealTracks library. You'll get new country-rhythm guitar styles from PG Music favorites Johnny Hiland and Brent Mason, along with modern-pop grooves that capture today’s radio-ready sound! There are also new indie-folk styles with guitar, bass, 6-string bass used as a high-chording instrument, acoustic guitar, and banjo. Plus, dedicated "cymbal fills" RealDrums provide an added layer that work very well with low-key folky styles with other percussion.

The 2026 49-PAK is loaded with other great new add-ons as well. Learn more about the 2026 49-PAK!

May 06, 2026

2026 Free Bonus PAK & 49-PAK for Band-in-a-Box® 2026 for Mac®!

With your version 2026 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!

These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!

This Free Bonus PAK includes:

The 2026 RealCombos Booster PAK: -For Pro customers, this includes 27 new RealTracks and 23 new RealStyles. -For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles. -For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
iOS Android Band-in-a-Box® App

Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:

20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)

Learn more about the Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Mac®!

More News