Previous Thread
Index
Next Thread
Print Thread
Go To
Page 4 of 4 1 2 3 4
Band-in-a-Box for Windows
Joined: Jan 2020
Posts: 3,622
J
Veteran
Offline
Veteran
J
Joined: Jan 2020
Posts: 3,622
L2L.

Ok so unfolding same prob.

this might seem way way out there and odd but im wondering if a timeout condition is occurring viz casio and bb ie bb is waiting for data ..doesnt get it and thus stops.
only pg will know in their coding if a stop condition can occur re the above. maybe midi lag is the issue with cas but not fp.

total!y blue skying it but if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ?
so a lag condition doesnt occur ?

as a crazy experiment check if you have big buffers in bb settings ...check this...then see if reduceing the buffer size.helps. sometimes the silliest things can cause problems.

by the way...and i dont want to get into a big debate over this ..but if your useing pc on board sound chip...ive seen lots of issues helping folks over the years...would recommend a decent low latency asio audio nterface. maybe try out for a week to ensure it works great see rb forum and tips forum for good interfaces.
a decent interface will let you set low buffers so you dont get latency which you mentioned up thread.

ps.do you have the net or background programs active while midi recording ? check in task mgr...ie other programs consuming pc resources ?
also if you reply by saying but why does cas work with previous years bb versions and not 2024..?
a possible answer is maybe 2024 places added demands on pc resources over previous years. but only pg can answer if 2024 consumes more resources.

just some ideas.

om. 🇨🇦. 🇬🇧

Last edited by justanoldmuso; 01/27/24 09:26 AM.

my songs....mixed for good earbuds...(fyi..my vocs on all songs..)
https://soundcloud.com/alfsongs
(90 songs created useing bb/rb)
(lots of tips of mine in pg tips forum.)
Band-in-a-Box for Windows
Joined: Nov 2008
Posts: 34
Enthusiast
OP Offline
Enthusiast
Joined: Nov 2008
Posts: 34
Originally Posted by justanoldmuso
L2L.

if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ?

ANSWER: Actually I think it would be the opposite because the Roland is 15 years old and the Casio is brand new. The Casio could be too fast or transmitting too much data. Still doesn't quite go along with why Casio works with all earlier versions EXCEPT 2024.

i dont want to get into a big debate over this ..but if your using pc on board sound chip...ive seen lots of issues helping folks over the years...

ANSWER: I have a desktop and laptop. In one system I am using an external audio interface and the other the internal sound card - makes no difference.

Thanks for the suggestions.

Band-in-a-Box for Windows
Joined: Jan 2020
Posts: 3,622
J
Veteran
Offline
Veteran
J
Joined: Jan 2020
Posts: 3,622
L2L.

i hate to be beaten by this stuff...lol.

Ok given your answers and all the ideas presented in this thread...and bear with me...but heres further thinking...

1..maybe pg can comment if 2024 is consuming more
pc resources than preceeding years.
if true then possibly other tasks on the pc in total with bb are leading to a resource issue and impacting bb ? check in task mgr eg is net running also ? if so try without the net.

2..now i know what your going to say which is an enigma...ie...BUT...fp works on bb 2024 !
and thats an excellent point....given your point that maybe cas is throwing out more data than fp maybe this in combo
with the larger resource useage bb2024 in total is causeing this odd stop situation. ive seen lots of weird things over the years.
it would be interesting to investigate how much data per sec is transmitted by cas over midi versus the fp.
and get actual figures.
in summary it might be just a pc resource issue.
ie bb 2024 plus cas consumes more resources than bb2024 plus fp.. but i might be out to lunch on this.
out of interest check out size of 2014 bb exe versus 2024 bb exe. ...there might be a clue there. ram useage ?

3..its totally unrelated but interestingly yonks ago i helped someone with a cas...he ended up getting another kbd.

heres a final thing thats bugging me...some people might say 'its gotta be a codeing bug in bb'...but if true why does fp work with 2024 ?

im gonna get a cuppa tea and do more thinking...lol.


best.

om

Last edited by justanoldmuso; 01/27/24 11:04 AM.

my songs....mixed for good earbuds...(fyi..my vocs on all songs..)
https://soundcloud.com/alfsongs
(90 songs created useing bb/rb)
(lots of tips of mine in pg tips forum.)
Band-in-a-Box for Windows
Joined: Jan 2020
Posts: 3,622
J
Veteran
Offline
Veteran
J
Joined: Jan 2020
Posts: 3,622
All.

ok something ive found.
running 2024 on a basic song here tssk manager in win is reporting around 2 percent to about 5 percent cpu useage for bbw64 and around 460 mb of ram useage.
which varies depending on default synth loaded.
in the bb drive itself the exe for bbw64 seems to be around 56mb..
and bb 2024 32 bit is 44mb ?
do you concur ?

L2L can you please tell me in 2024 64 bit running for fp connected what your above stats are in win task mgr ?
now repeat for casio connected. any big differences in ram or cpu viz fp ?
repeat above for 2024 32 bb. does cas work in bb 32 ??
now please repeat for your 2014 version bb.
task mgr again. firstly fp then casio connected..
how much pc resources are being consumed ?
cpu and ram.

addendum.
i assume youve been running bb 64 thru all this.
could you try with bb32 exe which comes with 2024 and use with casio connected...
does the problem disappear ?

humour me..lol...i hate to be beaten
the reasons for above are to assess the possibility of the pc running out of resources. what keeps on troubling me is fp works with 2024
which might lead one logically to conclude there isnt a bug in bb2024. btw as others have said andrew is v good people.


om. 🇨🇦. 🇬🇧

Last edited by justanoldmuso; 01/27/24 04:47 PM.

my songs....mixed for good earbuds...(fyi..my vocs on all songs..)
https://soundcloud.com/alfsongs
(90 songs created useing bb/rb)
(lots of tips of mine in pg tips forum.)
Band-in-a-Box for Windows
Joined: Jun 2012
Posts: 21,071
Veteran
Offline
Veteran
Joined: Jun 2012
Posts: 21,071
Quote
That was a great suggestion, but unfortunately, it did not solve the problem. I don't have to even be playing a single note repeatedly; it occurs (the MIDI recording stops in the middle of the song) when I am playing anything - not even just fast notes.
The MIDI clock rate I believe is 31.25kbits/second. Extrapolating that out, and presuming a start and stop bit are added to the 8-bit byte, this means that a byte transmits in about 320 microseconds, and with the normal MIDI message taking up three bytes, indicates that a complete message is transmitted in less than 1 millisecond (3 x 320 microseconds).

USB will transfer data at a significantly higher data rate again.

So I believe that your issue is not in any way related to the speed of your playing (unless you are exceeding 1000 note events / second crazy).

You mentioned that the BiaB Stop Recording message is displayed. That message would not normally come from the transmitted MIDI. It would come from within BiaB, usually from the Stop button being pressed on the transport.

Is this the stop message that you see?
[Linked Image - Only viewable when logged in]


BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Band-in-a-Box for Windows
Joined: Jun 2012
Posts: 21,071
Veteran
Offline
Veteran
Joined: Jun 2012
Posts: 21,071
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers.
Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?

Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs?
(Please make sure that no filters are affecting the displayed data)

Last edited by AudioTrack; 01/28/24 02:36 PM.

BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Band-in-a-Box for Windows
Joined: Jun 2009
Posts: 3,110
M
Veteran
Offline
Veteran
M
Joined: Jun 2009
Posts: 3,110
Was "MIDI Recording Stops Suddenly And Randomly" ever sorted out after pages n pages of posts ?

Band-in-a-Box for Windows
Joined: Jun 2012
Posts: 21,071
Veteran
Offline
Veteran
Joined: Jun 2012
Posts: 21,071
Originally Posted by musocity
Was "MIDI Recording Stops Suddenly And Randomly" ever sorted out after pages n pages of posts ?
Not that I'm aware of so far.


BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Band-in-a-Box for Windows
Joined: Nov 2008
Posts: 34
Enthusiast
OP Offline
Enthusiast
Joined: Nov 2008
Posts: 34
Originally Posted by AudioTrack
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers.
Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?

ANSWER: Not that I'm aware, but I am reaching out to Casio about this. There is an internal recorder on the Casio, but it is triggered by pushing an actual physical button that I can assure you is not being pushed.

Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs?
(Please make sure that no filters are affecting the displayed data)

Attached is a screenshot of the last MIDI messages before the recording of MIDI stopped and the "Save Recording?" dialogue pop-up box.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Midi-Events-3.jpg (138.05 KB, 37 downloads)
Band-in-a-Box for Windows
Joined: Nov 2008
Posts: 34
Enthusiast
OP Offline
Enthusiast
Joined: Nov 2008
Posts: 34
Originally Posted by musocity
Was "MIDI Recording Stops Suddenly And Randomly" ever sorted out after pages n pages of posts ?

No, the issue is still present with BIAB 2024 and I am still working on it with PG Support. We have determined that early versions of BIAB 2014 thru 2019 do not cause this issue. I'm still waiting to test some later versions.

Previous Thread
Next Thread
Go To
Page 4 of 4 1 2 3 4

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!

If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.

Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!

Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.

PowerTracks Pro 2026 for Windows is Here!

PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.

The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.

The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.

Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!

Get started today—first-time packages start at just $49.

Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!

Order now!

Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!

Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!

We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!

Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.

Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.

There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!

Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!

Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.

If you need any help deciding which package is the best option for you, just let us know. We are here to help!

Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!

Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!

We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!

There are over 100 new features in Band-in-a-Box® 2026 for Windows®.

When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.

Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.

Happy New Year!

Thank you for being part of the Band-in-a-Box® community.

Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!

Season's Greetings!

Wishing everyone a happy, healthy holiday season—thanks for being part of our community!

The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.

Team PG

Forum Statistics
Forums57
Topics86,048
Posts799,354
Members40,017
Most Online44,367
Mar 4th, 2026
Newest Members
kimmolsn25, addsomebottom, m3talmud, Chunie, Karandeep
40,017 Registered Users
Top Posters(30 Days)
MarioD 148
DC Ron 104
rsdean 104
DrDan 74
WaoBand 70
Today's Birthdays
dipalma18, Joey45, Karantois
Powered by UBB.threads™ PHP Forum Software 7.7.5