I am using the latest VST 64 bits plugin for BIAB 2022 feeding a VSTi soundfont player (latest TX16Wx VST 64 bits) , host is latest Reaper 64 bits.
I found that when hitting either Play or Sync into the BIAB plugin GUI , midi controllers like program change , volume, pan, ... are sent on one midi channel only.
Sending these controls with Reaper ReaControl plugin (on the same track than BIAB plugin) works fine , so I don't think it is a Reaper setting issue.
Is it a known issue, and does upgrading to BIAB 2024 could resolve it ?
I don't have the answer, but if you broached this to PG Music Support (support@pgmusic.com), they may be able to give you a definitive answer, especially in relation to version number that you are using.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
i use realband with reaps....tons of track midi and audio generation options in rb. it comes with bb. also rb has a huge midi feature set. See the manual for rb on your shipped pg content and pg vids on this site.
so what i do is generate tracks in rb then drop them into reaper. btw im a reaper user from version 0.99. but i use it lesser and lesser these days due to rb getting more features. ive done too many songs to list over the years useing bb/rb/reaps.
your tx plugin should work in rb...run tests. see my tips re realband in the pg tips forum....also check out a fabulous list of plugins that are free that work in rb. its all in tips. hth.
happiness.
om
Last edited by justanoldmuso; 10/16/2406:05 PM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb.)
It looks like we responded on Oct 11 - can you check in your junk inbox?
I've tested both the 2022 and 2024 plugins in Reaper, and ReaControlMIDI showed various CC's sending to different channels - everything seemed to be working fine. Can you check that? Also, what version of BIAB and the plugin are you using? You can find that in BIAB by going to Help > About (build number is next to "Version 2022)" and in the plugin by going to File > About.
I also downloaded TX16Wx and it seemed to be working properly, though I'm not at all familiar with it.
First my apologizes , I forgot that you gave me some hints on your acknowledgement message
My BIAB 2022 version is Build 927 , and my VTSi plugin version is 4.8.13 (64 bits)
This is example of the issue (new Reaper project with only BIAB and RealControlMIDI) : only control messages for channel 8 are sent ( soloist track ...) when hitting Play or Sync into the BIAB plugin GUI Others channels contains only Note On / Note Off messages
Btw , changing the channel for the working track (Soloist) sends control messages on the new selected channel as expected (for example channel 9 instead of 8)
Interesting, I'm using the exact same version as you, but I'm not able to duplicate this problem. Does this still happen if you use a new blank song in the plugin as well? No chords entered, just Generate then play/sync?
In ReaControlMIDI, if you uncheck "log all notes/sound off" that should limit the display to just CC messages and note-off messages while playing - try the above test with the first chord entered as C... to enter a rest, then ReaControlMIDI should show more of the CC messages without the display getting flooded with notes.
I must have missed this somehow, but it seems like the 2022 version of the plugin does not send CC's on the correct channels when pressing play in the plugin, but it does if you use sync. Can you try that?
I can confirm that it does work correctly with Reaper and Bidule only when using sync , otherwise program change for only a single midi channel is sent
BTW , with Reaper ,using the BIAB plugin into a separate process (Reaper setting) does not seem to work, even when using sync
I can confirm that it does work correctly with Reaper and Bidule only when using sync
Ok, that much is good at least. I've tested in the latest version of BIAB and it works both with Play or Sync, so it seems to have been fixed at some point.
Originally Posted by gegu
BTW , with Reaper ,using the BIAB plugin into a separate process (Reaper setting) does not seem to work, even when using sync
That also happens with the 2024 version. Probably best to set the BB plugin to automatic.
Just a remark : bank select is not sent for channel 10 (usually drums) , so I have to send it separately ( Bank MSB 1 / Bank LSB 0) in order to have drums loaded
Also , Bank select and Program change messages at sent several times (maybe normal for certain songs ?)
At this point, you may consider waiting a little longer and upgrading to BIAB 2025. Just a thought.
If it were me, I'd likely wait for the introductory-pricing 2025 version, buy that, but only upgrade to 2024 until the worst of the 2025 bugs are fixed. Unless, of course, there's some really compelling "must have" in 2025.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Just a remark : bank select is not sent for channel 10 (usually drums) , so I have to send it separately ( Bank MSB 1 / Bank LSB 0) in order to have drums loaded
Also , Bank select and Program change messages at sent several times (maybe normal for certain songs ?)
Those are usually sent when the song repeats, depending how and where you set the patch. If you're using Bar Settings, you can set Program/Bank changes that are either "All choruses" or a specific chorus, and if you use All Choruses then the change will be sent every time the chorus repeats that bar.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
![[Linked Image - Only viewable when logged in]](https://www.pgmusic.com/forums/ubbthreads.php?ubb=download&Number=28805&filename=midi.png)
![[Linked Image - Only viewable when logged in]](https://www.pgmusic.com/forums/ubbthreads.php?ubb=download&Number=28806&filename=Untitled.jpg)
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean