|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Is there a way to improve the fidelity of BIAB? I’m playing it from a Microsoft Surface Pro through a QSC K Series PA speaker. When I turn up the volume for a gig it gets muddy.
Any suggestions most welcome. Thanks.
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
When you turn up the volume on the Surface or the PA?
Might help to find the source of the problem.
I'd suspect using an interface instead of going directly out of the Surface audio might help. (if that's what you do)
Even an inexpensive 2i2 might make all the difference so the conversion from digital to audio uses better convertors, as I think the Surface likely has a headphone level out, not Line level.
Last edited by rharv; 11/29/24 06:00 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,805
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,805 |
I agree with rharv to change your output source from the Surface Pro.
An alternative output that's suited for live use is any small format mixer with USB. USB will provide proper level to the mixer and have decent converters. This will assure you are matching transfer between devices, give more routing flexibility and small format Mackie, Yamaha, Peavey, Behringer mixers are very affordable and can have effects and EQ. Some even have capability to record performances to an SD card.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2020
Posts: 3,584
Veteran
|
|
Veteran
Joined: Jan 2020
Posts: 3,584 |
AlastairLC...
see my tips in pg tips forum to save me retyping lots.
lots of great interfaces and mixers out there for better sound quality.
merry x.
om
Last edited by justanoldmuso; 11/30/24 05:51 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs(90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,448
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,448 |
I wouldn’t be surprised to learn that the output is the mini headphone jack. There are several reasons why that’s a bad idea (not Line Out level, prone to static in connection, jacks break easily). If so, Yes, get a USB audio interface like Focusrite or Presonus, and connect that to your QSC monitor. I have several QSC monitors that I think are great; I don’t think that’s a problem.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks everyone.
The Microsoft Surface Pro 9 has two USBC outputs.
I thought I’d try the Focusrite Scarlett Solo 4th Gen USB Interface.
I don’t understand why or how it will improve the fidelity but I’ll give it a go.
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
Good call, might surprise you.
The audio stays digital until it gets to Focusrite, then their convertors turn it into audio
The Surface was trying to do the conversion (which is not it's forte) and then a headphone level signal was trying to drive the PA input (mismatch).
The new choice should make a difference, but just know, the SOLO will draw its power from the Surface USB (no other power supply) so keep that plugged in.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks but I still don’t understand. Going from computer to PA, digital gets changed to audio. Going from mic to computer (as shown in ads), audio must get changed into digital. Can the interface do both?
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
Yes it does both (A/D & D/A)
Two big differences
1. Using Surface, Windows is doing the conversion, instead of an interface designed for the task. (much better convertors)
2. While the headphone out is audio, it is a weak audio signal compared to Line level, so the PA has to try to do more with less.
The PA 'expects' a line level signal and is designed for such.
The difference is very apparent when plugging a headphone out (like a phone or laptop) to my powered monitors vs. compared to a line level signal, like an interface. There's a world of difference that simply turning up the Monitor volume can't fix.
I think once you try it you'll notice right away.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2015
Posts: 2,623
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,623 |
Thanks but I still don’t understand. Going from computer to PA, digital gets changed to audio. Going from mic to computer (as shown in ads), audio must get changed into digital. Can the interface do both? The output level to the PA is better and better adjustable. The preamp in the Scarletts are better then just about any PC. The A/D and D/A are better, ditto. The connectors are better. Before I bought my first external interface I had persistent issues with sound not always being good, with earth loop hums, with CPU noise. Even good audio plug-in cards were a bit patchy on performance ... sensitive audio electronics inside the same box as CPU, memory, discs and the rest is just not really a good environment. I bit the bullet and bought one of the original Scarlett 2i2s and it made a huge difference. Better quality all round and no more issues with hums and things. Before long I'd also bought a Solo for my wife's PC, then a Saffire for my music PC, then an 8i6 for a laptop. I haven't regretted any of them, though if doing it again now, I'd probably get an Scarlett (USB) 18i20 rather than the Saffire (Firewire and now old). All of my audio interfaces are Focusrite, but I think the good names are all pretty good(*), e.g. Presonus, Motu, Universal Audio, RME, etc. (*) Apparently many have less gain in the preamp than is optimum for some particularly quiet dynamic microphones. The Shure SM7 is often mentioned in that context, though newer SM7 series now have a built-in preamp.
Last edited by Gordon Scott; 12/01/24 09:55 AM.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2025 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Got it. Tried to hook it up but so far no sound.
I assume the cable from my Surface Pro, running BIAB, goes into input 1 with a 1/4” phono jack, which I assume has to be stereo. (?)
Then my QSC speaker is hooked up to the two line outputs using separate mono 1/4” phono jacks adapted to RCA plugs.
If so, I need to buy the right connectors.
Please let me know if I’m not understanding this correctly. Thanks.
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
The surface should connect to the interface via USB cable, not audio.
Then the interface uses the Line Out to the PA.
The Inputs on the SOLO are for an additional guitar or Mic.
I do not remember if the SOLO required a driver installed or not, I don't think so, I assume the Surface will just 'see' it and load a driver.
The bigger Focusrites like 18i20 do require separate drivers but I *think the SOLO and 212 do not.
Did the SOLO come with a USB cable?
Last edited by rharv; 12/03/24 02:17 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks rharv. That did it. I used the USB cable it came with.
Strange that the manual doesn’t indicate that the USB port, which is on the back panel with the “out” ports, is the necessary input. Directions were sadly lacking.
The only problem is I have the turn the volume way up on the Surface Pro and the QSC speaker.
I’m not sure it'll be loud enough for gigs.
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
Increase the volume of the songs that are getting sent from the Surface (ie the file itself), then it's exponential afterwards.
The files I play thru the interface to the powered speakers can be made loud enough that it gets hard to get close enough to the speakers to turn them back down!
Did it help with fidelity? That was the original goal; do they sound better?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2015
Posts: 2,623
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,623 |
Thanks rharv. That did it. I used the USB cable it came with.
Strange that the manual doesn’t indicate that the USB port, which is on the back panel with the “out” ports, is the necessary input. Directions were sadly lacking.
The only problem is I have the turn the volume way up on the Surface Pro and the QSC speaker.
I’m not sure it'll be loud enough for gigs. My Solo is rather older, but I expect the operation would be similar. If the level seems low, then I think there's still something not set right. The large rotary control on the front panel should give good adjustment to set the volume and I suspect that's what's not yet set right. I think it control both the headphone volume and the output volume on the reap panel jacks, which may be fooling you. My Solo manual says a maximum of +9dBu, where the normal line level is +4dBu, so you should have almost twice the voltage levels available than you need. I would expect the Surface to send sensible data. IIRC there's usually a mark on the Windows volume control dialog that shows the 'normal' volume setting. You don't say what you have connected where, which would be helpful to help us spot any user errors. Perhaps you would indicate what you have connected where and to what the various switches and knobs are set.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2025 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks rharv.
I’ve turned the volume on the Surface Pro (playing the BIAB tracks) from my usual 12-14 up to 75 (out of 100) and the volume on the QSC speaker to near max. (And that’s in my studio!) I don’t understand why the interface robs the track of so much volume.
I haven’t done a side by side fidelity comparison yet. Will do tomorrow.
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks Gordon. I forgot to mention that I have the “Monitor” dial on all the way.
I’ve got USB connection in and one phono plug out to the QSC speaker. (I've ordered a dual mono cable.)
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
I don’t understand why the interface robs the track of so much volume. It shouldn't which is why we think there is some setting that is still not right. On my focurite units the Monitor dial does not control the volume of line outs. Does yours? (if you turn the Monitor dial on the focusrite does it make a difference in the PA while a file plays?) My gut says it is something before it leaves the Surface. Are the files themselves weak in volume? When you play them on the computer, how do the VUs inside the computer look? Whether it's BiaB, Windows Media Player, VLC Player (whatever) .. they all have meters to show what kind of software signal is being sent to the computer before it ever gets to the physical outputs.
Last edited by rharv; 12/03/24 04:28 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2012
Posts: 147
Apprentice
|
|
OP
Apprentice
Joined: Feb 2012
Posts: 147 |
Thanks rharv.
I can check all that out, but consider this:
I run BIAB on my Surface Pro, volume at 12, straight into my QSC speaker, volume at 75% for gigs. Then I insert an audio interface in the middle of that and I have to raise the Surface Pro volume to 75 and the QSC speaker to near max.
Why?
Cheers! -Alastair
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
That's what we're trying to figure out.
Re-reading your previous post;
Why is there a 'phono' plug from the interface to the speaker?
"I’ve got USB connection in and one phono plug out to the QSC speaker."
That should be a decent line level cord. (?)
1/4" to 1/4" regular cord.
Last edited by rharv; 12/03/24 07:00 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,737
Posts795,510
Members39,944
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean