1] I trashed preferences 2] The Audible Count in works and so does the visual count in, using the default song "C". No changes made. 3] I load a song. Audible count in disappears. Visual Count in still works. 4] From this point audible count in does not work - ever.
In the Count in and Metro. options, I have the following enabled Default Allow Lead in bars Play lead even if Intro is present Audible lead in Vol; 64 Instrument Side stick Pattern 1.3. 1234 Lead in drum count if drums disabled Visible Metronome Audible Metronome (disabled).
In the Song Options I have everything to default. I have tried redownloading BIAB and it is not helping
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
I have taken drastic action. Re-istalled BIAB, returned to factory settings, rechecked the audio driver I set it to Focusrite ASIO. On first run of the default Jazz Swing style I get a count in, but as soon as I load one of my own songs the count in is silenced and never returns for other songs. I have checked the Metronome and Count in dialogue it seems in order. I am increasingly of the opinion this is a fault.
Here is my dialogue Box as it currently stands. I enabled "Visual Metronome" and I can see the numbers counting down but no sound. Sometimes, I have been able to use the substyle fills, but not the "Count-in", but at present nothing works again.
Immediate Audio Error! It appears somehow for this little test, my MME was replaced with WAS! Which does not work on my system! Is sthis what you see? Or is this just more BIAB crazyness. Worked fine after I returned to MME.
There was no "fresh install" done on my end! Fact is the replacement of the MME with WAS in BIAB is relatively common for what ever reason. But is that the issue you have here?
I tried them all MME, WAS, Asio - they do not effect the count in. It's my opinion that this issue is nothing to do with the audio driver type. The fault is there with all drivers. A fresh install, a return to factory settings, trashing preferences all these things also do not work here.
ZeroZero, I had the same issue awhile back. I have included a picture of my count-in selections that worked for me and hopefully will work for you. Note that I use MME.
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
You may want to revert to an earlier version of your preferences that was saved prior to when you changed the preferences. This may restore the preferences to a version where everything was working correctly.
There was no "fresh install" done on my end! Fact is the replacement of the MME with WAS in BIAB is relatively common for what ever reason. But is that the issue you have here?
WAS is the default Audio Driver type in the program, so when you do a return ALL to factory settings, delete preference files for a hard factory reset or do a full uninstall and reinstall (and occasionally as a result of a Windows update), WAS will be the Audio Driver type, but as you noted you can always change this to your preferred of MME or ASIO from under Options | Preferences | Audio under Audio Driver Type from the drop down. You seem very familiar with this already so this is more so for anyone who happens across this and wonders the same thing as you.
I tried them all MME, WAS, Asio - they do not effect the count in. It's my opinion that this issue is nothing to do with the audio driver type. The fault is there with all drivers. A fresh install, a return to factory settings, trashing preferences all these things also do not work here.
Z
If after trying the suggestions of the other user above who provided a screenshot who expressed a similar issue in the past you are still having issues, please let us know and reach out to us at support@pgmusic.com and we can try and take a closer look at this issue with you.
Yes WAS is very old tech , in the 1990s as I remember. Latency is the issue for audio interfaces, something less than 6m sec, or you can feel a lag when playing. I will be in touch but have some rehearsals first. ASIO was invented by Cubase to minimise latency which is the round trip time between striking a note or message in MIDIand it coming out of the speakers, to much delay makes playing silly. Makes no difference to playback only. My money is now on a setting in my older song files, breaking the count in functions. Thank you for the support people.
Mario I tried these settings but they do not work. I have sometimes got some options for count in working, sometimes, the ones that use rhythm recordings, but never the two bar count in using rim shots. This is the one I want. There is clearly something wrong with the app. I think previously made songs ( created a few weeks ago) are permanently silencing the count in
1.. with great respect to my fellow users who often have problems with asio let me say i dont. asio works in both bb AND RB for me.
heres what i suggest...and yes i know its pricey...but rent a multi client interface like rme sometime or others listed in my tips in pg tips forum re mc interfaces and see if this solves the problems with asio not working. often its just a fact that a setting has not been set correctly in ones current interface being used or in windows sound or a daw setting.
i mention the above because sometimes people blame the music app (and i see same probs on other daw forums ) that get blamed whereas the truth of the matter is often its a setting in the interface or win sound or the music app thats the issue.
just my 2 devalued cents worth...lol.
2. as to count ins...in any music app i use..i just create my own count in track. and dont bother with the apps metronome features. SO in bb in chord view i'll use an rd by itself with the dots technique so only the drums play and then the chords start at bar three say. or if i want 4 bar count in...my chord view looks like ... (legend >>> ! = bar seperator.)
rd,rd ! rd,rd ! rd,rd ! rd,rd ! C,D ! C,D ! G, A ! G,A ! and the rest of the chord sheet. C and D are just chord examples. in summary...actually most times i have a 4 bar count in of an rd followed by the song chords. sometimes i might have a bigger count in viz bars in case i might have eg a spoken intro. (eg the song 'my granny told me...etc' ) in the songs in my sig. it has a spoken lyric at intro...lol. SO in summary i dont bother with any music apps metronome. the benefit also of the self created rd intro is when i exchange tracks tween different music apps. eg a song created in rband or bb then dropped into reaps where i might add something else. hope i make sense.
happiness.
om
Last edited by justanoldmuso; 08/19/2504:11 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean