PG Music Home Forums General Discussion Recording, Mixing, Performance and Production Gig Backing Tracks

Index

Print Thread

Go To

Page 1 of 2

Gig Backing Tracks #879048 02/07/26 09:34 AM Recording, Mixing, Performance and Production
Joined: Jun 2020 Posts: 2,758 United States Bass Thumper OP Veteran
OP Bass Thumper Veteran Joined: Jun 2020 Posts: 2,758 United States	We have an opportunity to do some small, private venue, social event gigs. These venues have no PA or mixing boards so we need to be entirely self-contained. Our first is scheduled in April and I’m seeking ideas to play our backing tracks should our primary approach suffer technical failures at a gig. Right now, we have a keyboard player and myself on bass guitar but that could expand to include a percussionist, an acoustic guitar player and vocalists in the future. Our PA system consists of a single QSC floor monitor. To various degrees we will have backing tracks that we will play along with. Our keyboard, a mic and the backing tracks will be inputs to my Tascam interface and will be output to the floor monitor. This is not that different from my home studio setup. The backup for the Tascam is a portable 6-channel Peavy mixer. And I’ll play my bass thru a 40W bass amp. At this time our primary way of playing the backing tracks is to connect a Win 11 laptop to the Tascam (or Peavy mixer) via USB and the tracks will be played by my DAW (Fender Studio Pro). The bass players on these tracks will always be stem-removed. An added benefit of FSP is that it can display the chords as we play thru the songs. I’m looking for a secondary method to play the backing tracks should my laptop fail at a gig. I’m thinking that I could load the playlist of songs (WAV or M4A files) on a portable digital audio player (DAP) with a 3.5 or 4.4mm output and with appropriate cabling, connect it to the Tascam (or Peavy). If this ends up as our backup audio player, I’d need to bring chord sheets in a 3-ring binder and a music stand, which is not a big deal. To those with gig experience, am I thinking along the right path or is there a better approach than a DAP? If a DAP is the way to go, there are a ton out there. Any suggestions which one? https://soundcloud.com/user-646279677 BiaB 2026 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.

Re: Gig Backing Tracks Bass Thumper #879087 02/07/26 02:27 PM Recording, Mixing, Performance and Production
Joined: Sep 2001 Posts: 2,147 Essex England Bob Calver Veteran
Bob Calver Veteran Joined: Sep 2001 Posts: 2,147 Essex England	I find that a tablet using mp3s and a simple music player app does fine. the small jack is a little vulnerable but so far has survived. i did use an ipod but that plays mp3s one after the other so a tablet with a music app that plays one song at a time by clicking the file is better.

Re: Gig Backing Tracks Bass Thumper #879092 02/07/26 02:53 PM Recording, Mixing, Performance and Production
Joined: May 2000 Posts: 22,598 Mi., USA rharv Veteran
rharv Veteran Joined: May 2000 Posts: 22,598 Mi., USA	In my experience, be careful with 3.5 or 4mm cables of any useful length. A cheap one may add unintended noise Also, if doing that, I'd probably lean toward the Tascam vs Peavey, but that's just me. YMMV Last edited by rharv; 02/07/26 02:56 PM. I do not work here, but the benefits are still awesome Make your sound your own!

Re: Gig Backing Tracks Bob Calver #879097 02/07/26 03:22 PM Recording, Mixing, Performance and Production
Joined: Jun 2020 Posts: 2,758 United States Bass Thumper OP Veteran
OP Bass Thumper Veteran Joined: Jun 2020 Posts: 2,758 United States	Originally Posted by Bob Calver I find that a tablet using mp3s and a simple music player app does fine. the small jack is a little vulnerable but so far has survived. i did use an ipod but that plays mp3s one after the other so a tablet with a music app that plays one song at a time by clicking the file is better. Thanks Bob, I too am a little concerned about small jacks which is why I'm leaning towards the 4.4mm. And very good point regarding automatic vs singular playback. We definitely need singular to give us time to configure the keyboard and chat with the audience. https://soundcloud.com/user-646279677 BiaB 2026 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.

Re: Gig Backing Tracks rharv #879098 02/07/26 03:30 PM Recording, Mixing, Performance and Production
Joined: Jun 2020 Posts: 2,758 United States Bass Thumper OP Veteran
OP Bass Thumper Veteran Joined: Jun 2020 Posts: 2,758 United States	Originally Posted by rharv In my experience, be careful with 3.5 or 4mm cables of any useful length. A cheap one may add unintended noise Also, if doing that, I'd probably lean toward the Tascam vs Peavey, but that's just me. YMMV You also make a good point. I should pay attention to cable quality. And I agree with favoring the Tascam, that interface is built like a brick, very little plastic. The Peavey is also solid but will be the backup. https://soundcloud.com/user-646279677 BiaB 2026 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.

Re: Gig Backing Tracks Bass Thumper #879175 02/08/26 09:44 AM Recording, Mixing, Performance and Production
Joined: May 2000 Posts: 22,598 Mi., USA rharv Veteran
rharv Veteran Joined: May 2000 Posts: 22,598 Mi., USA	My concern with the Peavey is impedance mismatch, IMHO they are not the best at such ... and that signal path may be less than Line level I do not work here, but the benefits are still awesome Make your sound your own!

Re: Gig Backing Tracks Bass Thumper #879192 02/08/26 12:23 PM Recording, Mixing, Performance and Production
Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY	Many of you who have been here for decades know Mini-jacks in PA equipment are a pet peeve of mine. Not only is the impedance wrong as Bob said, but the gain is a constant challenge. Then if anything jostles the connection, it sounds like a thunderstorm. Just the thing at a wedding or church service etc. BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: Gig Backing Tracks Bass Thumper #879194 02/08/26 01:09 PM Recording, Mixing, Performance and Production
Joined: May 2000 Posts: 22,598 Mi., USA rharv Veteran
rharv Veteran Joined: May 2000 Posts: 22,598 Mi., USA	Wally World has these, seem well liked and has better connections https://www.walmart.com/ip/Fosi-Audio-ZD3-Desktop-DAC-Preamp-Fully-Balanced-Digital-for-Home-Stereo-Amplifier-Bluetooth-USB-Optical-Coax-TV-HDMI-ARC-Input/15372304594 Not suggesting this model, just saying there are quite a few options that include better connections. I do not work here, but the benefits are still awesome Make your sound your own!

Re: Gig Backing Tracks rharv #879213 02/08/26 03:32 PM Recording, Mixing, Performance and Production
Joined: Jun 2020 Posts: 2,758 United States Bass Thumper OP Veteran
OP Bass Thumper Veteran Joined: Jun 2020 Posts: 2,758 United States	Originally Posted by rharv Wally World has these, seem well liked and has better connections https://www.walmart.com/ip/Fosi-Audio-ZD3-Desktop-DAC-Preamp-Fully-Balanced-Digital-for-Home-Stereo-Amplifier-Bluetooth-USB-Optical-Coax-TV-HDMI-ARC-Input/15372304594 Not suggesting this model, just saying there are quite a few options that include better connections. Rharv, I’m not sure you understand the need as explained at the top. The ZD3 does not store and play audio files. I’m looking for a media player that serves as a backup/replacement to my laptop and DAW combo. Therefore, in addition to storing and playing audio files it must have a reliable output to feed a digital interface, the ZD3 can't do this. One possible option is the Hiby R4 but much more research on my part is required to find a solution that meets the need. https://soundcloud.com/user-646279677 BiaB 2026 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.

Re: Gig Backing Tracks Bass Thumper #879214 02/08/26 03:55 PM Recording, Mixing, Performance and Production
Joined: May 2000 Posts: 22,598 Mi., USA rharv Veteran
rharv Veteran Joined: May 2000 Posts: 22,598 Mi., USA	OK then never mind, sorry If the computer uses USB to mixer all you need is a DAP that sends USB .. so where did this 3.5 or 4mm requirement come from? https://store.hiby.com/products/hiby-r1 Again, not recommending, just looking at it from a different angle I guess Last edited by rharv; 02/08/26 04:04 PM. I do not work here, but the benefits are still awesome Make your sound your own!

Re: Gig Backing Tracks Bass Thumper #879221 02/08/26 04:28 PM Recording, Mixing, Performance and Production
Joined: Dec 2003 Posts: 24,686 Hamlin NY MarioD Veteran
MarioD Veteran Joined: Dec 2003 Posts: 24,686 Hamlin NY	Steve, why not get another laptop as a backup? It doesn't need to be an expensive one, just one to run as a backup. I believe that is what Notes does. Tips on how to fall asleep in a living room chair: 1- Be old 2- Sit in a chair 64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware

Re: Gig Backing Tracks Bass Thumper #879237 02/08/26 06:19 PM Recording, Mixing, Performance and Production
Joined: Aug 2011 Posts: 11,031 Winston Salem, NC USA Jim Fogle Veteran
Jim Fogle Veteran Joined: Aug 2011 Posts: 11,031 Winston Salem, NC USA	Steve, A old style battery operated media player can do exactly what your asking for and you may already have one onhand sitting in a junk drawer. I'm thinking of something like a Microsoft Zune, Apple iPod or a generic MP3 player. Every media player I've seen can playback MP3, WAV and MP4a and other audio formats. Almost all also can playback a playlist of audio files. Plug a cord into the media player headphone jack and never unplug it so you don't have to worry about the jack wearing out. Make sure you install a fresh battery before every gig. 😁 Jim Fogle - 2026 BiaB (Build 1224) RB (Build 8) - Ultra+ PAK DAWs: Cakewalk Sonar - Standalone: Zoom MRS-8 Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD Music at: https://fogle622.wix.com/fogle622-audio-home

Re: Gig Backing Tracks Bass Thumper #879278 02/09/26 04:38 AM Recording, Mixing, Performance and Production
Joined: Jan 2010 Posts: 889 Sonoran Desert mrgeeze Expert
mrgeeze Expert Joined: Jan 2010 Posts: 889 Sonoran Desert	You guys are working way too hard. Keep it simple. It works better. Last century an amazing technology was invented to help you solve the 3.5mm cable problem. Bluetooth. I've used bluetooth to connect my tracks (I use high quality BIAB/DAW created mp3 tracks) for about a decade now. A decade. 10 years. I've had about zero problems mentioned by those on this forum. There is no loss of quality or latency issues. I do agree that 3.5 mm jacks are a risk. Much worse than bluetooth. So I no longer use 3.5mm jacks. I don't use cables for my tracks at all. The worst risk you have with bluetooth is forgetting to silence your phone before you start playing. That happened once. I got a phone call in the middle of a song over the pa. Everybody cracked up. With Bluetooth The sound quality is EXCELLENT. Ive played in small rooms and large outside community parks. Musicians often catch me between sets to learn how I make my tracks. The sound reinforcement systems I've used QSC 10.2 Turbosound IP300 Bose S1 Pro Electro Voice EV 50 Line Array Electro Voice EV 30M Line Array. Electro Voice EV Everse 10 Sometimes I use a mixer. My current mixer (Mackie ProFx10) has bluetooth built in. Often I do not use a mixer (live guitar and tracks gigs for example). For the QSC without a mixer I use an xlr bluetooth receiver. https://a.co/d/04ejNFsT I would not think of dragging a PC/MAC to a gig. Or some silly specialized audio player. For playing the tracks I use IOS devices using Anytune Pro https://www.anytune.app/ This software runs on IOS and/or Android. I believe Mac OS also Normally I use an IPAD on stage. My phone serves as the backup at the gigs. I've had to switch to the phone exactly once over hundreds of gigs. Synching setlists and what not between devices is simple. Its so much easier than dragging a lappie to a gig. I create setlists. at home, synch devices (ipad & phone) before the gig & off I go. At the gig I bring up the set list, use a wireless bluetooth pedal to start/stop, next/previous, loop on/off through the setlist. I've been at it for a decade now. I just don't see a better way for gigging with tracks.. But I do keep looking The OP mentioned seeing the chord changes on the screen. I'm not sure how/if Anytune can do this. Possibly it can. I just don't need a feature liket that. I do believe if you examine for a few minutes the other things AnytunePro can do for you, you will be pleasantly surprised. And ditch the cables. Bluetooth. biab2026(Mac) Latest Build Mac OS (Latest) Apple Mac Mini M2 pro 32GB Ram Logic Pro (latest or pretty close) Blue and White Sea Star

Re: Gig Backing Tracks Bass Thumper #879285 02/09/26 05:40 AM Recording, Mixing, Performance and Production
Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY	I agree. All I said was, don’t use cables with mini-jacks. What I use in small concerts is a silly specialized Tascam audio player with Bluetooth built in. And if it’s a big band or orchestra concert, an iPad running ForScore and a Bluetooth foot pedal for page turns. My iPad case is magnetic so it snaps to my music stand. BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: Gig Backing Tracks Bass Thumper #879363 02/09/26 03:30 PM Recording, Mixing, Performance and Production
Joined: Jan 2010 Posts: 889 Sonoran Desert mrgeeze Expert
mrgeeze Expert Joined: Jan 2010 Posts: 889 Sonoran Desert	Matt, We are in agreement. I've had a lot more problems with mini jacks over the years than Bluetooth. Moving off the PC/MAC platform to IOS (could be android) for performing with tracks was a game changer for me. A whole variety of software exists that complements most workflows. For me it is Anytune Pro and a BlueBoard Bluetooth Midi Pedal. Plenty of other options out there. If one's studio output is high quality mp3, aiff, wav (etc) there's better stuff for your phone than your PC/MAC. At least for gigging. Way back when I carried a PC to a gig and played BIAB projects for backing tracks. USB DAC, adapter cables etc. All that stuff. That now seems stone age to me. Finally, at times it can all seem a bit silly. For that I offer:. biab2026(Mac) Latest Build Mac OS (Latest) Apple Mac Mini M2 pro 32GB Ram Logic Pro (latest or pretty close) Blue and White Sea Star

Re: Gig Backing Tracks Matt Finley #879368 02/09/26 03:58 PM Recording, Mixing, Performance and Production
Joined: Jan 2015 Posts: 2,662 Hampshire, UK Gordon Scott Veteran
Gordon Scott Veteran Joined: Jan 2015 Posts: 2,662 Hampshire, UK	Regarding avoiding mini-jacks, I thought to look to see whether any modest-cost mixers have built-in layers and some do. I wondered if there was a market for a player with jack and/or XLR outputs. Probably not if low-cost mixers would suffice. Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2026 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .

Re: Gig Backing Tracks Gordon Scott #879372 02/09/26 04:01 PM Recording, Mixing, Performance and Production
Joined: May 2000 Posts: 22,598 Mi., USA rharv Veteran
rharv Veteran Joined: May 2000 Posts: 22,598 Mi., USA	Originally Posted by Gordon Scott Regarding avoiding mini-jacks, I thought to look to see whether any modest-cost mixers have built-in layers and some do. I wondered if there was a market for a player with jack and/or XLR outputs. Probably not if low-cost mixers would suffice. There are players with XLR and Line level outs They exist Last edited by rharv; 02/09/26 04:02 PM. I do not work here, but the benefits are still awesome Make your sound your own!

Re: Gig Backing Tracks Bass Thumper #879394 02/09/26 06:34 PM Recording, Mixing, Performance and Production
Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY Matt Finley Veteran
Matt Finley Veteran Joined: Jul 2000 Posts: 27,562 Hudson Valley & Lake George NY	I have one. BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.

Re: Gig Backing Tracks MarioD #879400 02/09/26 07:28 PM Recording, Mixing, Performance and Production
Joined: Jun 2020 Posts: 2,758 United States Bass Thumper OP Veteran
OP Bass Thumper Veteran Joined: Jun 2020 Posts: 2,758 United States	Originally Posted by MarioD Steve, why not get another laptop as a backup? It doesn't need to be an expensive one, just one to run as a backup. I believe that is what Notes does. Hey Mario, another laptop could be an option for a backup but the volume of gear is starting to add up. I'm looking for a small footprint device like a DAP. But if I use a USB cable to carry the audio data to my Tascam I need to ensure that the DAP will be simultaneously charged (by USB) while it's playing music; otherwise I've introduced another failure mode . . . a dead battery. https://soundcloud.com/user-646279677 BiaB 2026 Windows For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.

Re: Gig Backing Tracks Bass Thumper #879412 02/09/26 11:27 PM Recording, Mixing, Performance and Production
Joined: Apr 2017 Posts: 2,038 Sillie Con Valley, California Mike Halloran Veteran
Mike Halloran Veteran Joined: Apr 2017 Posts: 2,038 Sillie Con Valley, California	I’ve been gigging with an iPad for many years now. Many music players take too long to search and load. TwistedWave did not. Touch the song file, it’s loaded and ready to play. I could use Bluetooth but my portable PA systems both have a USB-A port. A USB-A to USB-C cable gets the job done. BIAB 2025 Audiophile Mac 24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia/Tahoe, M1 MBAir, 2012 MBP Digital Performer11, Logic, Finale27/Dorico/Encore/SmartScorePro/Notion6/Overture5

Go To

Page 1 of 2

Moderated by Andrew - PG Music, Callie - PG Music, Catherine, PeterGannon, pgmoderation

Link Copied to Clipboard

ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News

April 22, 2026

Band-in-a-Box 2026 for Mac Videos

With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.

Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.

Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!

April 21, 2026

Band-in-a-Box 2026 for Mac is Here!

Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.

Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!

Special Offers
Upgrade to Band-in-a-Box^® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box^® packages page to explore all available upgrade options.

2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box^® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.

April 02, 2026

Holiday Weekend Hours

As we hop into the Easter weekend, here are our holiday hours:

April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours

Wishing you an egg-cellent weekend!

— Team PG

March 24, 2026

Update to Build 10 of RealBand® 2026 for Windows®!

If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.

March 12, 2026

Band-in-a-Box® 2025 for Mac® users: Build 904 now available!

If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.

March 12, 2026

Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!

Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.

February 18, 2026

PowerTracks Pro 2026 for Windows is Here!

PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.

The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.

The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.

Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!

Get started today—first-time packages start at just $49.

Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!

Order now!

More News